The Original CZ Forum
GENERAL => Cajun Gun Works => Topic started by: schmeky on February 12, 2017, 12:56:22 PM
-
Finally, we have our new full size CGW grips available.
10500 - black
10510 - sliver
10520 - red
10530 - blue
10540 - copper
10550 - olive
https://cajungunworks.com/product/10500-black-cgw-grips/
Compacts are forthcoming.
-
Here are some more links for oogleing. I must say that the pop up suggesting box below the search field is working better. It is quite helpful.
10540 Copper Thin Alum Grips Full Size
https://cajungunworks.com/product/10540-copper-cgw-grips/
10550 Olive Thin Alum Grips Full Size
https://cajungunworks.com/product/10550-olive-thin-alum-grips-full-size/
10530 Blue Thin Alum Grips Full Size
https://cajungunworks.com/product/10530-blue-cgw-grips/
10520 Red Thin Alum Grips Full Size
https://cajungunworks.com/product/10520-red-cgw-grips/
10510 Silver Thin Alum Grips Full Size
https://cajungunworks.com/product/10510-silver-cgw-grips/
10500 Black Thin Alum Grips Full Size
https://cajungunworks.com/product/10500-black-cgw-grips/
-
Compact in black please! Have credit card in hand. Waiting.....
-
Looking forward to hearing some reviews on these. Wouldn't mind a pair for PCR when the compacts come out.
-
Tok36,
Thank you for the listing.
-
Oh man I cannot wait!!!!
Edit: for the compact version :P
-
Awesome! 8)
-
Just placed an order for the blue aluminum grips. Can't wait to get them in!
-
Just placed an order for the blue aluminum grips. Can't wait to get them in!
can you post a picture once you install them on your gun?
-
Just placed an order for the blue aluminum grips. Can't wait to get them in!
can you post a picture once you install them on your gun?
I will update this thread with pictures when they arrive on Saturday. Can't beat CGW for their quick shipping!
-
Nice! The blue grips would go nicely on my cajunized highly polished 75B....I'll have to save up some cash...
-
I could not be happier with the grips. I have large hands but even the factory rubber grips were just oddly shaped and felt like I could never get my support hand palm really locked in. The ball cuts on the front of the grips and vertical serrations really do a great job of locking your hands in. Fit and finish was perfect as to be expected from CGW. The blue color looks awesome and is a great fit considering I'm a LEO. Here are some pictures for those wondering. Definitely do not hesitate to purchase them. CGW simply rocks!
(http://i925.photobucket.com/albums/ad93/jsedacca8/IMG_7360_zpsoj7d5xsi.jpg)
(http://i925.photobucket.com/albums/ad93/jsedacca8/IMG_7361_zps0tb59ztc.jpg)
-
Very nice. Thank you for the pics.
-
Oh man that looks good!!! :o
-
Oh man that looks good!!! :o
They do look great but also transform how the gun feels in the hand.
-
The ball cuts on the front of the grips and vertical serrations really do a great job of locking your hands in
jsedacca,
That is precisely what we were trying to accomplish. Took nearly a year to finally zero in on all the right cuts, depth of cuts, and overall dimensions.
Thank you for the feedback :)
-
Is there a planned ETA on the compact version?
-
Would you rate these better than the H6-2-1 black waffle pattern slim G10 grips?
Have not seen them on the web site lately, however these appear to be a worthy replacement.
-
Waiting for compact as well for my c-100!
-
Nice, they look great !!
-
Any measurements on width? Have a Co-Worker trying to make the DA reach on a Shadow work and so far we are struggling to find anything thin enough. Needs to stay IPSC Production legal so the short reach kit isn't a solution.
-
FWIW, Just one work-around:
I have the same trigger finger reach problem with my 75 Shadow and a comp. back-up 75B.
If you look carefully at the thin aluminum grips, the only part that shortens your reach to the trigger is the very top of the grip on the strong hand side just above the frame opening.
Cut it off.
Sounds bad, but it cannot be seen if you cut it off just a 1/32"- above the frame opening. I cut mine off and carefully sanded the top edge with a small bevel to make it smooth. At that point, your trigger finger is against the frame. It works. No grip made can be thinner than this.
The grip has a small inset into the frame opening and is just as secure as it ever was.
If I could get my new computer to post a pic, you wouldn't know it's cut unless told ahead of time.
I also did this with some home made aluminum grips as well as the strong side of some LOK grips. ALL work perfectly with no movement or problems.
-
FWIW, Just one work-around:
I have the same trigger finger reach problem with my 75 Shadow and a comp. back-up 75B.
If you look carefully at the thin aluminum grips, the only part that shortens your reach to the trigger is the very top of the grip on the strong hand side just above the frame opening.
Cut it off.
Sounds bad, but it cannot be seen if you cut it off just a 1/32"- above the frame opening. I cut mine off and carefully sanded the top edge with a small bevel to make it smooth. At that point, your trigger finger is against the frame. It works. No grip made can be thinner than this.
The grip has a small inset into the frame opening and is just as secure as it ever was.
If I could get my new computer to post a pic, you wouldn't know it's cut unless told ahead of time.
I also did this with some home made aluminum grips as well as the strong side of some LOK grips. ALL work perfectly with no movement or problems.
Thanks for the tip. Wonder if it would be considered IPSC Production legal.
-
Grips of the same general shape and not having thumb rests etc.. are "USPSA" legal. IPSC, you'll have to czeck.
USPSA D-4, 21.4:
? Replacement grip panels are allowed provided they do not extend below the butt of the gun to form a make-shift magwell.
-
Are the compact versions ever going to get here?
-
Are the compact versions ever going to get here?
Sure they will soon. It's hard to rush perfection. ;)
-
Anyone have pics of the new grips on an Urban Gray finish? Trying to figure out what color would work best... Thanks!
-
How thick in the CZ75 with the new CGW aluminum grips? With OEM plastic grips it is 1.40" . Thanks
-
I'm looking to add the Copper Grips to my SP-01. They look great.