The Original CZ Forum

CZ LONG ARMS => CZ Scorpion EVO => Topic started by: Garand1957 on August 03, 2017, 02:02:37 PM

Title: Faux Suppressor Removal ?
Post by: Garand1957 on August 03, 2017, 02:02:37 PM
Any videos on how to remove the faux suppressor from my carbine ?
Title: Re: Faux Suppressor Removal ?
Post by: biggerhammer on August 03, 2017, 02:13:34 PM
Mine came off by simply unscrewing it by hand. Standard right-handed thread, turn counter-clockwise to unscrew.
Title: Re: Faux Suppressor Removal ?
Post by: yrs on August 03, 2017, 02:54:58 PM
I read some are hand tight like biggerhammer says. Mine was really tight. I ended up using a strap wrench. Once I got the initial movement, then it's just simple unscrewing by hand. Afterwards I see some evidence of blue loctite on the threads. Use strap wrench to avoid marring the surface.
Title: Re: Faux Suppressor Removal ?
Post by: Garand1957 on August 08, 2017, 03:35:44 PM
I read some are hand tight like biggerhammer says. Mine was really tight. I ended up using a strap wrench. Once I got the initial movement, then it's just simple unscrewing by hand. Afterwards I see some evidence of blue loctite on the threads. Use strap wrench to avoid marring the surface.

Thanks for the tip  :)
I used a strap wrench and it came off....no doubt it had loc-tite on the threads.
Now just need to know the thread pitch and find a decent comp even if it ads some overall length to the rifle.
The faux suppressor just don't do anything for me :)
Title: Re: Faux Suppressor Removal ?
Post by: OpusXJ on August 08, 2017, 03:58:11 PM
It's 1/2-28.
Title: Re: Faux Suppressor Removal ?
Post by: romukom on August 08, 2017, 04:22:20 PM
Use a heat gun to heat up the end cap.  U used the strap wrench and I ended up unscrewing the faux can body out of the end cap being left hand threaded.
See this post. 
http://www.czfirearms.us/index.php?topic=80718.msg659752#msg659752