The Original CZ Forum

GENERAL => CZ Gunsmithing => Topic started by: Commo on March 09, 2018, 12:12:12 PM

Title: Trigger pin slips in new 75 Compact
Post by: Commo on March 09, 2018, 12:12:12 PM
I?ve got about 500 rounds through my new 75 Compact and find that after a 150-round session that the trigger pin has moved out about 1/8?..

It presses back in but is obviously too loose or not flared properly on one end.

Is this pin from Cajun Gun Works the better solution rather than fuss with the stock pin?

https://cajungunworks.com/product/tr-pin-cgws-exclusive-floating-trigger-pin/ (https://cajungunworks.com/product/tr-pin-cgws-exclusive-floating-trigger-pin/)

Thanks,

Commo
Title: Re: Trigger pin slips in new 75 Compact
Post by: Tok36 on March 09, 2018, 12:51:39 PM
In my opinion if you ever plan on taking the pistol apart the CGW floating trigger pin is well worth it. It is retained by the Trigger Return Spring located at the center of the pin. This allows it to be pushed out of place with a standard punch and a tap with a hammer.

The factory trigger pin is retained by staking at the ends of the pin. To keep it in place you can restake the end that is allowing it to slip out of place.
Title: Re: Trigger pin slips in new 75 Compact
Post by: Commo on March 11, 2018, 09:38:34 PM
No brainer to pick up the floating trigger pin...will be ordering...thanks!

Commo