Author Topic: CZ 75 EXPLODED PARTS VIEW  (Read 22008 times)

0 Members and 1 Guest are viewing this topic.

Offline Dos

  • Hero Member
  • *****
  • Posts: 1113
CZ 75 EXPLODED PARTS VIEW
« on: May 21, 2009, 05:59:24 PM »
Thought I'd post this up, as others have been asking.  I got it off the net years ago somewhere but can't remember exactly.  May have been Brownells or Numrich??



Offline Stuart

  • Hero Member
  • *****
  • Posts: 8389
Re: CZ 75 EXPLODED PARTS VIEW
« Reply #1 on: May 21, 2009, 06:29:09 PM »
cool..thanks

Offline Amistad

  • Jr. Member
  • **
  • Posts: 91
Re: CZ 75 EXPLODED PARTS VIEW
« Reply #2 on: May 21, 2009, 07:35:12 PM »
Many thanks, dos.  I saved it to my hard drive and suddenly realized that my wheel mouse can make this nifty diagram increase or decrease in size simply by rolling it.  Excellent!

Amistad

Offline Dos

  • Hero Member
  • *****
  • Posts: 1113
Re: CZ 75 EXPLODED PARTS VIEW
« Reply #3 on: May 21, 2009, 10:09:48 PM »
Yeh, it looks best at @ 125% magnification.   If you have an imaging program sharpen the focus about 2 points....and it looks darn good.   ;D
« Last Edit: May 21, 2009, 10:17:33 PM by Dos »

Offline pitbull

  • Hero Member
  • *****
  • Posts: 1048
Re: CZ 75 EXPLODED PARTS VIEW
« Reply #4 on: May 21, 2009, 10:45:54 PM »
Thanks for the diagram.

Offline derweibhai

  • Hero Member
  • *****
  • Posts: 781
Re: CZ 75 EXPLODED PARTS VIEW
« Reply #5 on: November 12, 2013, 01:26:37 PM »
Lubrication points are as follows

Barrel locking lugs top and bottom
Top of barrel near muzzle (or bottom wherever it contacts)
Slide rails
Pin locations like the hammer pin

Thats it............

That diagram is messed up, you never put oil on the extractor, firing pin, and you should not put oil on the sear, hammer engagement surfaces because it attracts dirt causing wear + it makes a hell of a mess.

Offline FireFly

  • Full Member
  • ***
  • Posts: 218
Re: CZ 75 EXPLODED PARTS VIEW
« Reply #6 on: November 14, 2013, 03:27:46 PM »

Thanks for the head's up!

I pretty much oil everything
Because the journey is the worthier part...The Shepherd's Tale

Speak kindly to me, beloved master. Revel in my unconditional love, and give me every minute that you can spare, for my time with you is short.

--Your faithful dog

1911Tuner (That one's my own. I'm a rescuer. It's what I do)

Offline bmfdez

  • Newbie
  • *
  • Posts: 30
Re: CZ 75 EXPLODED PARTS VIEW
« Reply #7 on: November 28, 2013, 04:53:07 AM »
Takes too much time..

Offline bang bang

  • Hero Member
  • *****
  • Posts: 2100
Re: CZ 75 EXPLODED PARTS VIEW
« Reply #8 on: November 28, 2013, 05:29:04 PM »
i like the colored part.  makes it simple.

i got a poster from one of persons selling them several years ago, but it doesnt have any of the lube points.

iirc, someone is making/selling a gun mat with similar info.

Offline jdchen0407

  • Newbie
  • *
  • Posts: 16
Re: CZ 75 EXPLODED PARTS VIEW
« Reply #9 on: August 21, 2017, 09:12:55 PM »
I usually just do a pass with ballistol spray  on the slide and on the frame.  plenty of lube on everything.   the few spritzs that do get into the firing pin channel won't hurt it.  ymmv

Offline 1SOW

  • Moderator
  • Hero Member
  • *****
  • Posts: 14356
  • GO GREEN - Recycle 9MM
Re: CZ 75 EXPLODED PARTS VIEW
« Reply #10 on: August 22, 2017, 12:17:18 AM »
The smart CZ retailers here don't fully agree with that diagram either.
Lube:   +"trigger bar", +hammer pins where it rotates, + bbl lugs, + bbl bushing (tip of bbl),  +several pins,  - FP , - Extractor .

+ = lightly oil/lube
- = NO oil/lube

Read some of schmecky's posts/stickies in case I added some or forgot others. 

Offline gwvt

  • Sr. Member
  • ****
  • Posts: 410
Re: CZ 75 EXPLODED PARTS VIEW
« Reply #11 on: August 22, 2017, 08:13:08 AM »
But then again CZC posted this photo to their FB page with the following caption:
Quote
Every now and then we get a question about what needs oiling on a cz pistol. There are obvious places like recoil spring, barrel, slide rails, trigger return spring, main spring etc. But this might be one place that is overlooked.
Oil is your friend

Offline valvestem

  • Newbie
  • *
  • Posts: 34
Re: CZ 75 EXPLODED PARTS VIEW
« Reply #12 on: September 02, 2017, 09:01:49 PM »
Yikes, that is very very bad.