Author Topic: CZ-712 Disassembly Photo Album  (Read 6679 times)

0 Members and 1 Guest are viewing this topic.

Offline timb99

  • Newbie
  • *
  • Posts: 36
CZ-712 Disassembly Photo Album
« on: January 23, 2010, 02:25:11 PM »
I cleaned my 712 this weekend and took photos.  Here's a link to the album, and to the slideshow. 

The password is b8d4b123

http://s21.photobucket.com/albums/b265/timb99/CZ-712%20Disassembly/?track=share_email_album_view_click

http://s21.photobucket.com/albums/b265/timb99/CZ-712%20Disassembly/?albumview=slideshow&track=share_email_album_view_click

http://s21.photobucket.com/albums/b265/timb99/CZ-712%20Disassembly/

http://s21.photobucket.com/albums/b265/timb99/CZ-712%20Disassembly/?albumview=slideshow

The links all work for me.  Let me know if they work for you.

Also note, the slideshow plays pretty fast.  I prefer the album view, where you can page through and read the captions.

Feedback?
« Last Edit: January 23, 2010, 02:30:06 PM by timb99 »

Offline 2fewdaysafield

  • Moderator
  • Hero Member
  • *****
  • Posts: 1162
Re: CZ-712 Disassembly Photo Album
« Reply #1 on: January 26, 2010, 09:47:32 PM »
Thanks timb99!

Offline virginiajack

  • Posts: 3
Re: CZ-712 Disassembly Photo Album
« Reply #2 on: February 23, 2011, 09:33:01 PM »
Wow, Tim, what a nice service you've done with your photos and explanations.  However, I'm not real certain about where the position of the O-ring should be when assembling (new gun out of box).  Is it snugged up against the piston?

Offline timb99

  • Newbie
  • *
  • Posts: 36
Re: CZ-712 Disassembly Photo Album
« Reply #3 on: July 12, 2011, 11:08:49 AM »
Sorry for not getting back sooner.  I am working in South Africa now, and kind of lost track of this forum.

In answer to your question, place the o-ring over the magazine tube, just below the threads, exactly like it shows in the "o-ring and piston" photo.

Then, when you put the barrel on, the o-ring will be properly placed in the cylinder.

Offline 2fewdaysafield

  • Moderator
  • Hero Member
  • *****
  • Posts: 1162
Re: CZ-712 Disassembly Photo Album
« Reply #4 on: September 09, 2011, 03:26:07 AM »
timb99.....

Hope you don't mind, but I copied your links over to a thread on the Huglu Forum at SGW.

Offline timb99

  • Newbie
  • *
  • Posts: 36
Re: CZ-712 Disassembly Photo Album
« Reply #5 on: September 09, 2011, 07:51:11 AM »
Not at all. :)

Offline +P

  • Newbie
  • *
  • Posts: 3
Re: CZ-712 Disassembly Photo Album
« Reply #6 on: October 16, 2011, 06:55:45 PM »
I just picked up my 712 and was wondering about the barrel having some front to back movement maybe an 1/8 inch or less when assembled is that normal ????

Offline timb99

  • Newbie
  • *
  • Posts: 36
Re: CZ-712 Disassembly Photo Album
« Reply #7 on: October 18, 2011, 11:54:17 AM »
That does not sound normal at all.  The barrel should be fully seated in the receiver.

I'd contact CZ Customer Service if you can't get it fully seated.

Offline +P

  • Newbie
  • *
  • Posts: 3
Re: CZ-712 Disassembly Photo Album
« Reply #8 on: October 19, 2011, 06:03:39 PM »
 Timb99, thanks for all your work, your photos and captions are 100 times better than the CZ manual and I called CZ and it seems the forend wasn't seated properly it needed a little  push to seat ...

Offline cdbeagle

  • Newbie
  • *
  • Posts: 29
Re: CZ-712 Disassembly Photo Album
« Reply #9 on: June 26, 2012, 10:31:32 PM »
This also works for the 720.  I used it a couple of months ago when I disassembled my 720.
I'm interested in the fact that the less secure a man is, the more likely he is to have extreme prejudice.
Clint Eastwood