Author Topic: CZ 82 'Parts Pistols' now at Century  (Read 4425 times)

0 Members and 1 Guest are viewing this topic.

Offline willchris

  • Posts: 41
CZ 82 'Parts Pistols' now at Century
« on: June 09, 2010, 09:12:29 AM »
Century has CZ 82 'parts pistols' in now starting at $79.00.

 http://www.centuryarms.biz/proddetail.asp?prod=HG1247%2DPI

Just ordered my 1st, and will post on how it is when it arrives.........

Offline fullerb1

  • Full Member
  • ***
  • Posts: 206
Re: CZ 82 'Parts Pistols' now at Century
« Reply #1 on: June 09, 2010, 02:41:17 PM »
Do you still need an FFL or C&R to order one?
VZ-82
SVWE .40
S&W Model 13 revolver 4" .357 mag
Mossberg 500 with ATI pistol grip stock and fore end (12 ga)
2 x 20 Gauge Mossberg 500s
Mosin Nagant 91/30 (Tula)
Savage .22 Semi auto rifle.
And I think that I am starting to have an addiction. :-)

Offline willchris

  • Posts: 41
Re: CZ 82 'Parts Pistols' now at Century
« Reply #2 on: June 09, 2010, 05:48:41 PM »
Yes, you need an 03' to order. The pistols could be fully functional (e.g. -- missing sights) or not.

They don't garantee any particular part will be on the pistols, and 'pull them off the top of the pile' as orders arrive.

Considering what a new extractor or firing pin can run, I thought I'd  pick one up.

If they are pretty much 'all there' but for a terrible finish, I had thought about buying a 2nd --- then putting one together for a nice refinish job --- and still have plenty of 'spares'.

Mine should be in in the next day or so.

« Last Edit: June 09, 2010, 05:54:05 PM by willchris »

Offline jcrntx

  • Full Member
  • ***
  • Posts: 167
Re: CZ 82 'Parts Pistols' now at Century
« Reply #3 on: June 20, 2010, 11:57:28 AM »
willchris, did you receive your parts gun CZ82?  what kind of shape was it in, what was it missing?? ???

Offline willchris

  • Posts: 41
Re: CZ 82 'Parts Pistols' now at Century
« Reply #4 on: June 27, 2010, 05:58:45 AM »
Received the 82' from Century.

The part(s) missing were the slide stop, trigger guard latch pin, and the slide stop spring. Finish was in o.k. shape, and there was a VERY slight chip out of the frame on the front right rail.

And, it came with one pristine magazine.

All in all ---- I think it was worth the price plus the $10.00 shipping.

I put the slide stop in from my other one, and thought I'd shoot it this week.

Offline jcrntx

  • Full Member
  • ***
  • Posts: 167
Re: CZ 82 'Parts Pistols' now at Century
« Reply #5 on: June 28, 2010, 06:58:13 PM »
I ordered a couple of the CZ 82 ufixems as well.  I ordered the good condition (119.00 each) as the salesman told me all the poor condition (79.00 each) had bulged barrels.  Both guns were complete with 1 mag except for the slide stop/spring and front site. 

I then called up and ordered two of the 79.00 poor one as I figure I could use the spare parts.  Got those today and they both have brand new chrome lined barrels and are only missing the slide stop and springs so these poor ones turned out to be a better deal in the end.  Not too bad a deal all around...

Offline willchris

  • Posts: 41
Re: CZ 82 'Parts Pistols' now at Century
« Reply #6 on: June 29, 2010, 02:36:55 AM »
jcrntx,

A fair deal. Somewhere down the road --- I'll be needing something. Just an extractor from CZ is around $30.00.

With all the CZ 82's being shipped in, I firgured there would be some spare parts, and possibly some Czech Army 'armorer' kits floating around. Not yet anyway.

BY THE WAY ---- did the ones that you received the other day have the 'new U.S. made barrel ---- with lands & grooves?

My barrel is LnG. Thought I'd try a few 95gr cast bullets through it over some N310.



« Last Edit: June 29, 2010, 02:43:55 AM by willchris »

Offline Owenslee

  • Newbie
  • *
  • Posts: 35
  • Retired Mfg Engineer, SEL Pilot, RVN 1968-1972
Re: CZ 82 'Parts Pistols' now at Century
« Reply #7 on: June 29, 2010, 08:28:54 PM »
Century is now sold out of the $79.87 parts guns as of today.

Kerry

Offline jcrntx

  • Full Member
  • ***
  • Posts: 167
Re: CZ 82 'Parts Pistols' now at Century
« Reply #8 on: June 29, 2010, 11:54:45 PM »
jcrntx,

A fair deal. Somewhere down the road --- I'll be needing something. Just an extractor from CZ is around $30.00.

With all the CZ 82's being shipped in, I firgured there would be some spare parts, and possibly some Czech Army 'armorer' kits floating around. Not yet anyway.

BY THE WAY ---- did the ones that you received the other day have the 'new U.S. made barrel ---- with lands & grooves?

My barrel is LnG. Thought I'd try a few 95gr cast bullets through it over some N310.







The two "poor condition" 79.00 pistols had the new lands/grooves barrels.  They also had less parts missing than the good condition ones!  I am curious to see how they shoot with the different barrel...

 

anything