Author Topic: What holsters fit the RAMI  (Read 36296 times)

0 Members and 1 Guest are viewing this topic.

Offline ESVA_gearhead

  • Newbie
  • *
  • Posts: 37
Re: What holsters fit the RAMI
« Reply #75 on: May 30, 2016, 12:10:56 AM »
Vedder Light Tuck for me....



Offline PappaWheelie

  • Newbie
  • *
  • Posts: 16
  • "This is war, and in war time is of the essence."
    • The Children's Bread
Re: What holsters fit the RAMI
« Reply #76 on: July 05, 2016, 10:12:28 PM »
I carry 12:00 IWB with total tucked-shirt concealment with a Crossbreed SuperTuck tweaked to lower all but the hammer and the butt of the extended grip below the belt line.  In a pinch Clinger's Atom works as well, albeit with more belt sag and less pressure-distributing comfort.  Re. comfort, the lower contour of the SuperTuck's leather got trimmed, generally V-shaped, to enable fully comfortable sitting, bending over, etc.  Both holsters are fully RAMI-specific.
CC: CZ 2075 RAMI BD w/ (15) HERO, CGW Short Reset Kit/OEM "Thick" Trigger, polished SA hammer tooth; modified Crossbreed SuperTuck 12:00 IWB Holster

Homeboy: CZ 97 BD, CGW Short Reset Kit/OEM "Thick" Trigger, Underwood +P 185g Nosler

Offline pdxrealtor

  • Full Member
  • ***
  • Posts: 178
Re: What holsters fit the RAMI
« Reply #77 on: July 05, 2016, 11:42:38 PM »
Be careful with Clinger Holsters. I had one that would detach the magazine if bumped against a hard object like a wall, car door, etc. Their CS was less than stellar as well IMO.
CZ 97 BD- CGW Pro Kit/Action job
CZ 97 BD -  Stock (daughters)
CZ SP01 Tactical CGW/Action job -  threaded waiting for silencer.
CZ 75 Stainless (daughters)
CZ 75 Matte Stainless -  CGW SAO Conversion
CZ Rami BD CGW Pro package/action job -  main squeeze

Offline TWEAKD4

  • Newbie
  • *
  • Posts: 6
Re: What holsters fit the RAMI
« Reply #78 on: July 06, 2016, 05:49:57 AM »
I was watching a CZ video on Full30 Military Arms Channel https://www.full30.com/video/b3c57479b330e28c7d6b165923d7b609 and he really liked his Contact! Concealment holster.  I didn't see a Rami listed as an option for them so I contacted them and within 2 days they had it on their website.  http://www.contactconcealment.com/cz-usa-iwb-ap-holster.html.  No experience with them but I wanted to spread the word of another option.

Offline sealman

  • Newbie
  • *
  • Posts: 19
Re: What holsters fit the RAMI
« Reply #79 on: July 13, 2016, 05:15:59 AM »
Just ordered a White Hat IWB holster for my new Rami. Also ordered a kydex shell for my Glock 19 that can swap out with the Rami shell.


Should know if I like them in 4 weeks or so  :( .

Offline slikshoes

  • Full Member
  • ***
  • Posts: 107
Re: What holsters fit the RAMI
« Reply #80 on: August 17, 2016, 08:23:36 PM »
For the money, the Alien Gear Cloak Tuck 3.0 IWB has proven to be a damn good deal.  It's very comfortable at a 4 o' clock carry.  Retention is great, and the draw is swift and smooth.  I'd carry the RAMI a lot more w/ this awesome holster ... but my PCR gets all the attention these days.

Offline pdxrealtor

  • Full Member
  • ***
  • Posts: 178
Re: What holsters fit the RAMI
« Reply #81 on: August 17, 2016, 08:24:26 PM »
I hear a lot of good things about Alien Gear Holsters. A lot!
CZ 97 BD- CGW Pro Kit/Action job
CZ 97 BD -  Stock (daughters)
CZ SP01 Tactical CGW/Action job -  threaded waiting for silencer.
CZ 75 Stainless (daughters)
CZ 75 Matte Stainless -  CGW SAO Conversion
CZ Rami BD CGW Pro package/action job -  main squeeze

Offline rick9748

  • Newbie
  • *
  • Posts: 17
Re: What holsters fit the RAMI
« Reply #82 on: August 29, 2016, 12:41:30 AM »
Ordered mine from "The Holster Store" perfect fit & leather @ $30.00.Can not beat it and quality added. Quirky -  scroll to CZ holster Rami- open- no picture- top left open CZ holsters- do not select Rami when shown, scan down - "My choice" - Pro Carry open - gun type select Rami and go from there, no problems.
I do not know how they make these holsters for $30.00??
Only offered in 1 3/4 loop.
Hope this makes sense if not let me know.

Offline DougC

  • Full Member
  • ***
  • Posts: 104
Re: What holsters fit the RAMI
« Reply #83 on: January 26, 2017, 11:50:57 AM »
I use an AIWB holster from www.alexandryandesign.com for my RAMI BD. They make some really good quality stuff.

CZ Family: SP-01 Tactical 9mm, P-01, P-09 RAMI BD.
Non-CZ: Arex ReX Zero 1 S, 1927 Mosin Nagant

Offline Shotmaker

  • Newbie
  • *
  • Posts: 3
Re: What holsters fit the RAMI
« Reply #84 on: February 01, 2017, 02:58:50 PM »

Offline low income cz

  • Newbie
  • *
  • Posts: 1
Re: What holsters fit the RAMI
« Reply #85 on: February 17, 2017, 05:10:03 PM »
i am looking for a blackhawk or blackhawk stye with the release button for my rami. if anyone has come across one or has one. please let me know.