« previous next »
Pages: [1]   Go Down

Author Topic: need a CZ75 firing pin  (Read 1533 times)

0 Members and 1 Guest are viewing this topic.

Offline Gray_Wolf

  • Jr. Member
  • **
  • Posts: 35
need a CZ75 firing pin
« on: March 30, 2014, 01:43:36 AM »
I'm looking for a CZ 75 firing pin with, whats the best (cheapest) place to buy? not looking for anything fancy but the factory part.

Is there a classified section here? (I cant find it) anyone here has one to spare?
Logged

Offline Bodene

  • Hero Member
  • *****
  • Posts: 1822
Re: need a CZ75 firing pin
« Reply #1 on: March 30, 2014, 02:26:29 AM »
Here's the classifieds  http://www.czfirearms.us/index.php?board=74.0 Or you can try CZ-USA, CZ Custom or Cajun Gun Works.- Bodene
Logged

Offline ThompsonCustom

  • Hero Member
  • *****
  • Posts: 1079
Re: need a CZ75 firing pin
« Reply #2 on: March 30, 2014, 11:08:18 AM »
You looking for a 75 or 75b? I have one for the block models id sell ya but no spare non block model firing pins. Also if it's a pre b the firing pins can vary by year.
Logged
www.AerospaceArms.com Current Deals:
Faxon 16" Pencil Barrel $148
21% off all magpul products code: "magpul"

Offline Gray_Wolf

  • Jr. Member
  • **
  • Posts: 35
Re: need a CZ75 firing pin
« Reply #3 on: March 30, 2014, 12:08:41 PM »
hmm this is actually for a Norinco NZ85 (CZ 85 copy) it has a firing pin safety. (I do have a CZ 75B Stainless so don't ban me lol)

didn't know they differ that much...here's a pic


« Last Edit: March 30, 2014, 12:28:34 PM by Gray_Wolf »
Logged

Offline ThompsonCustom

  • Hero Member
  • *****
  • Posts: 1079
Re: need a CZ75 firing pin
« Reply #4 on: March 30, 2014, 05:00:36 PM »
Well its hard to say if it would work. It's close to the cz 75b the front end just looks a little different. If you can get some measurements with a pair of calipers maybe I could give you a better guess if it will work or not.

Someone has had to try it on here before maybe they will chime in.
Logged
www.AerospaceArms.com Current Deals:
Faxon 16" Pencil Barrel $148
21% off all magpul products code: "magpul"

Offline Gray_Wolf

  • Jr. Member
  • **
  • Posts: 35
Re: need a CZ75 firing pin
« Reply #5 on: March 30, 2014, 05:37:22 PM »
The front end is broken off that's why I need a new one lol. I'm more worried about the cut outs.
Logged

Offline ThompsonCustom

  • Hero Member
  • *****
  • Posts: 1079
Re: need a CZ75 firing pin
« Reply #6 on: March 30, 2014, 07:51:39 PM »
The cut outs look to be the same as the cz 75b firing pin.
Logged
www.AerospaceArms.com Current Deals:
Faxon 16" Pencil Barrel $148
21% off all magpul products code: "magpul"

Offline 1SOW

  • Hero Member
  • *****
  • Posts: 15006
  • GO GREEN - Recycle 9MM
Re: need a CZ75 firing pin
« Reply #7 on: March 30, 2014, 09:06:06 PM »
Check it against your 75B,  if they are the same,  some of us have one we'll sell.
I put in an extended pin years ago and still have the factory original -somewhere-.
Logged
Pages: [1]   Go Up
« previous next »
 

anything