Author Topic: Could sure use some help  (Read 530 times)

0 Members and 1 Guest are viewing this topic.

Offline Dan D

  • Newbie
  • *
  • Posts: 3
Could sure use some help
« on: June 04, 2013, 07:34:34 PM »
I recently received my 3rd rifle barell for my 455.  I already had the 17hmr and 22 magnum.  In the package that contains the 5 round clip and tools to change the barell there was an odd shaped piece of plastic with a hole in it and a groove on one end.  I have never seen this item before and cannot locate it on the schematics.  Is this some sort of an adapter?  Boy it would be most appreciated if some one out there could shed a little light my way.  I will try to add a photo to this post.
Respectfully Submitted,
Dan
Sorry I can not seem to get a picture on here

Online painter

  • Hero Member
  • *****
  • Posts: 3099
    • Frosty's Finishes
Re: Could sure use some help
« Reply #1 on: June 04, 2013, 08:35:51 PM »
You need to host your photo on a site like photobucket or flikr and link to it.

http://www.czfirearms.us/index.php?topic=14704.0
I had the right to remain silent...

but not the ability.

Offline viking499

  • Hero Member
  • *****
  • Posts: 2114
Re: Could sure use some help
« Reply #2 on: June 04, 2013, 08:57:56 PM »
Think it is a spacer to make up the space from the wider WMR/HMR magazine on the 22 magazines.

Offline Nupes

  • Newbie
  • *
  • Posts: 49
Re: Could sure use some help
« Reply #3 on: June 04, 2013, 10:47:33 PM »
Viking is correct...it is called the magazine housing insert and is listed as item 12 in the manual.  It should come with a pin.  It gets put in the rear part of the magwell and there is a hole there for the cross pin.  Put a piece of scotch tape over the ends of the pin cuz it has a mind of its own to fall out when your messing around with the action removed. 

Offline Dan D

  • Newbie
  • *
  • Posts: 3
Re: Could sure use some help
« Reply #4 on: June 05, 2013, 11:30:34 AM »
Nupes,
That is just the information that I needed.  Thanks all of you for such a prompt response.  If others wish to post particularly on installation of this gizm or where I can find a diagram on how to do so I would also be most appreciative.
Dan

Offline viking499

  • Hero Member
  • *****
  • Posts: 2114
Re: Could sure use some help
« Reply #5 on: June 05, 2013, 12:59:39 PM »
Watch the video on this page and see if it helps.

http://cz-usa.com/products/view/455-american/

Offline Dan D

  • Newbie
  • *
  • Posts: 3
Re: Could sure use some help
« Reply #6 on: June 05, 2013, 01:16:05 PM »
Viking,
Well they say a picture is worth a thousand words but heck that video was silent and yet said so much more.  Having watched it there can no longer be any doubt on my part as to what this item and roll pin are for.  Nor is there any doubt that I will have any questions as to how to install it.  Awesome sir, just awesome.  All of you who have responded have been just great.  A big THANK YOU!!!!  :)
Dan

Watch your thoughts; they become words.
Watch your words; they become actions.
Watch your actions; they become habits.
Watch your habits; they become character.
Watch your character; it becomes your destiny.
--Frank Outlaw


Offline viking499

  • Hero Member
  • *****
  • Posts: 2114
Re: Could sure use some help
« Reply #7 on: June 05, 2013, 02:28:41 PM »
Your welcome.  We are all glad we could help.

The only thing you owe us is a a picture sometime. ;)

 

anything