Author Topic: P01/P02 sights  (Read 2383 times)

0 Members and 1 Guest are viewing this topic.

Offline e-mishka

  • Jr. Member
  • **
  • Posts: 60
P01/P02 sights
« on: January 29, 2015, 12:04:56 PM »
Guys,
I want to replace factory sights on my P02 with either CZ custom CZ 75 Tactical Rear Sight or
CGW EZD sights.

Does anyone have them installed on their p01/p02?
Pics would be appreciated.


Trying to decide which ones to get

Offline e-mishka

  • Jr. Member
  • **
  • Posts: 60
Re: P01/P02 sights
« Reply #1 on: January 31, 2015, 07:56:42 PM »

No one has czc or cgw rear sights installed ?


Sent from my iPhone using Tapatalk

Offline mutant90

  • Newbie
  • *
  • Posts: 6
Re: P01/P02 sights
« Reply #2 on: January 31, 2015, 11:33:02 PM »
Here's my CZ Custom tactical rear sight and red fiber optic sights.

http://imgur.com/a/VIs1G#0
« Last Edit: January 31, 2015, 11:34:42 PM by mutant90 »

Offline rossco63

  • Jr. Member
  • **
  • Posts: 62
Re: P01/P02 sights
« Reply #3 on: February 01, 2015, 03:05:06 AM »
I installed the CGW EZD sights on my P-01. Love them.
« Last Edit: February 01, 2015, 03:08:30 AM by rossco63 »
"Take these three items: some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone," Walt Kowalski.
_____
CZ75 P-01
Beretta BU9 Nano

Offline e-mishka

  • Jr. Member
  • **
  • Posts: 60
Re: P01/P02 sights
« Reply #4 on: February 01, 2015, 06:00:41 PM »
Thanks guys. Do they (czc or cgw ) interfere w hammer in any way ?


Sent from my iPhone using Tapatalk

Offline Towns

  • Hero Member
  • *****
  • Posts: 1749
Re: P01/P02 sights
« Reply #5 on: February 01, 2015, 07:42:14 PM »
Yes, with the factory hammer fully forward, it is difficult to manually cock it. That is the reason I changed hammers on mine. 
With the competition hammer, it is much easier to cock with your thumb. 


I did a google search and found this pic that looks like a 75 with EZ/D rear sight and factory hammer fully forward.


« Last Edit: February 01, 2015, 07:45:38 PM by Towns »
“The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.”
― G.K. Chesterton

Offline mutant90

  • Newbie
  • *
  • Posts: 6
Re: P01/P02 sights
« Reply #6 on: February 01, 2015, 09:16:02 PM »
Yes. With the new CZ Custom tactical rear, I can't pull back the factory hammer from the fully down position. Not a big deal, since I practice dry fire from the half-cock or fully-cocked positions.

Offline rossco63

  • Jr. Member
  • **
  • Posts: 62
Re: P01/P02 sights
« Reply #7 on: February 02, 2015, 06:57:27 PM »
Yep. The OEM hammer can't be cocked from the full rest setting with the CGW sight. I'm solving that by installing a CGW hammer.
"Take these three items: some WD-40, a vise grip, and a roll of duct tape. Any man worth his salt can fix almost any problem with this stuff alone," Walt Kowalski.
_____
CZ75 P-01
Beretta BU9 Nano

Offline e-mishka

  • Jr. Member
  • **
  • Posts: 60
Re: P01/P02 sights
« Reply #8 on: February 04, 2015, 01:38:06 PM »
I ordered cgw sight set to try, will see how it turns out

Offline e-mishka

  • Jr. Member
  • **
  • Posts: 60
Re: P01/P02 sights
« Reply #9 on: March 06, 2015, 12:40:03 PM »
I settled on the CZC tactical rear and 6mmx2.75mm fo front.
I've tried CGW sight set, but rear sight notch was too deep and wide for my liking.

Offline Nimdabew

  • Hero Member
  • *****
  • Posts: 513
Re: P01/P02 sights
« Reply #10 on: March 06, 2015, 04:07:26 PM »
Are the rear sights easy to drift after loosening the rear sight set screw? I want to move my night sights to my P-02 from my SP-01 and install different sights on the SP-01, but I don't want to have to fight the rear. Front is easy enough.
snakeye, no worries, I don't need someone in a leotard. :)

Offline catalyst81

  • Jr. Member
  • **
  • Posts: 53
Re: P01/P02 sights
« Reply #11 on: March 07, 2015, 12:47:19 PM »
Are the rear sights easy to drift after loosening the rear sight set screw? I want to move my night sights to my P-02 from my SP-01 and install different sights on the SP-01, but I don't want to have to fight the rear. Front is easy enough.

They are in there good but its not too difficult to knock them out.  I was able to do it without using a vice.

Offline rhart

  • Hero Member
  • *****
  • Posts: 1249
Re: P01/P02 sights
« Reply #12 on: March 07, 2015, 03:59:11 PM »
I installed the CGW EZD sights on my P-01. Love them.


Do you  IWB carry this gun and if so do the sights hang on anything?

Offline joepau1k

  • Newbie
  • *
  • Posts: 37
Re: P01/P02 sights
« Reply #13 on: March 14, 2015, 11:26:53 PM »
Who has the night sights from CGW on their P01 and what do you think of them?


Sent from my iPad using Tapatalk

Offline Tok36

  • Hero Member
  • *****
  • Posts: 3292
Re: P01/P02 sights
« Reply #14 on: March 15, 2015, 02:58:02 AM »
Who has the night sights from CGW on their P01 and what do you think of them?


Sent from my iPad using Tapatalk

The Mepro night sights CGW sells are the standard CZ night sights that come stock on a few different CZ models. They are calibrated for different models, otherwise they are allot alike.



I have them on 2 of my CZ's. The only issue i have with the CZ night sights is that the front sight almost completely fills the rear notch. So very little light gets around the sides of the front sight. I prefer more light if i can have it. They are bright, sturdy, tall sights. Most folks seam to like them.
« Last Edit: March 15, 2015, 09:57:15 PM by Tok36 »
Will work for CZ pics! (including but not limited to all CZ clones)