Author Topic: New Design CGW Barrel Bushing  (Read 31985 times)

0 Members and 1 Guest are viewing this topic.

Online schmeky

  • Moderator
  • Hero Member
  • *****
  • Posts: 2602
New Design CGW Barrel Bushing
« on: November 06, 2015, 04:25:24 PM »
We have some new products in the wings.  This is our new prototype CZ barrel bushing.  The pic is a pre-production prototype.  The advantages of the new CGW design are:

  • Fits the slide ID tight, just like the factory bushing for -0- play
  • Fits with no modifications, no machining is required, uses OEM front sight and cross pin
  • Reduces the end play at the barrel muzzle to -0- for a super tight, accuracy enhancing lock-up
  • Very reasonable cost; easy to install by the average owner
  • Black oxide finished to blend in with the slide


[/list]
« Last Edit: November 06, 2015, 05:03:39 PM by schmeky »

Online viking499

  • Hero Member
  • *****
  • Posts: 3822
Re: New Design CGW Barrel Bushing
« Reply #1 on: November 06, 2015, 04:33:55 PM »
Interesting.  Is it still held in by the front sight pin?

Online schmeky

  • Moderator
  • Hero Member
  • *****
  • Posts: 2602
Re: New Design CGW Barrel Bushing
« Reply #2 on: November 06, 2015, 05:00:34 PM »
viking499,

Yes, installs exactly like the OEM bushing. 

Offline cntrydawwwg

  • Hero Member
  • *****
  • Posts: 4339
Re: New Design CGW Barrel Bushing
« Reply #3 on: November 06, 2015, 05:06:23 PM »
Cool. I actually like it shiny. Would add just a touch of bling.
If guns are outlawed.........
 Only outlaws will have guns.

Offline Tok36

  • Hero Member
  • *****
  • Posts: 3579
Re: New Design CGW Barrel Bushing
« Reply #4 on: November 06, 2015, 05:31:45 PM »
Interesting. I see a few of these in my future.
Will work for CZ pics! (including but not limited to all CZ clones)

Offline rich63

  • Sr. Member
  • ****
  • Posts: 495
Re: New Design CGW Barrel Bushing
« Reply #5 on: November 06, 2015, 05:59:24 PM »
Any idea when they will become available?

rich63

Offline rhart

  • Hero Member
  • *****
  • Posts: 1575
Re: New Design CGW Barrel Bushing
« Reply #6 on: November 06, 2015, 06:22:22 PM »
Do you have to remove the bushing to take out the barrel? Is this similar to an Accubushing?

Offline brisix

  • Full Member
  • ***
  • Posts: 119
Re: New Design CGW Barrel Bushing
« Reply #7 on: November 06, 2015, 06:33:28 PM »
I am very interested!!!!

Offline h2ogunr

  • Newbie
  • *
  • Posts: 14
Re: New Design CGW Barrel Bushing
« Reply #8 on: November 06, 2015, 06:43:19 PM »
nice job censoring my post about this company with rude phone/customer service. now i feel the same about this board. just like cgw, there are many boards with gun info. ill go there. take this one and shove it.


Bbbbbbbbbbbbanned!
« Last Edit: December 05, 2015, 12:13:50 AM by Grendel »

Offline cntrydawwwg

  • Hero Member
  • *****
  • Posts: 4339
Re: New Design CGW Barrel Bushing
« Reply #9 on: November 06, 2015, 06:51:42 PM »
Well I see you're still logged in. So Bye. You won't really be missed.
   
        Yes David, when do you expect these to be out?
If guns are outlawed.........
 Only outlaws will have guns.

Online schmeky

  • Moderator
  • Hero Member
  • *****
  • Posts: 2602
Re: New Design CGW Barrel Bushing
« Reply #10 on: November 06, 2015, 09:16:15 PM »
Plan on having these available in December 2015. 

Barrel will go in an out, just like an out of the box CZ, bushing does not have to be removed for barrel removal.


Offline Rhino

  • Hero Member
  • *****
  • Posts: 663
Re: New Design CGW Barrel Bushing
« Reply #11 on: November 06, 2015, 09:25:53 PM »
Does it stick out further than the barrel? If it does it would protect the barrel crown.

Offline wdbutcher

  • Hero Member
  • *****
  • Posts: 1842
Re: New Design CGW Barrel Bushing
« Reply #12 on: November 06, 2015, 09:33:12 PM »
schmeky, I see that you already offer a bushing for the the Tristars/Caniks. How much tighter are these compared to the stock bushings?
« Last Edit: November 06, 2015, 09:37:46 PM by wdbutcher »
CZ SP-01 Tactical, CZ P-07, Canik TP9V2, Webley Mark IV, Saiga AK-47, S&W Shield

Offline painter

  • Hero Member
  • *****
  • Posts: 5324
Re: New Design CGW Barrel Bushing
« Reply #13 on: November 06, 2015, 09:45:51 PM »
nice job censoring my post about this company with rude phone/customer service. now i feel the same about this board. just like cgw, there are many boards with gun info. ill go there. take this one and shove it.
No one will miss you.

BUH BYE!
I had the right to remain silent...

but not the ability.

Offline himurax13

  • Sr. Member
  • ****
  • Posts: 428
Re: New Design CGW Barrel Bushing
« Reply #14 on: November 06, 2015, 09:55:06 PM »
How difficult is it to remove the stock bushing?

Sent from my VS986 using Tapatalk