Author Topic: New Design CGW Barrel Bushing  (Read 41667 times)

0 Members and 1 Guest are viewing this topic.

Offline coolbox

  • Hero Member
  • *****
  • Posts: 1971
Re: New Design CGW Barrel Bushing
« Reply #30 on: November 07, 2015, 01:31:19 PM »
We plan to offer the "CGW-10X Barrel Bushing" for the full size larger barrel OD (.550") versions initially.  The 10X bushing should work with the threaded SP series barrels, but we will verify this.

We do plan to offer the 10X bushing for the slim barrel, full size CZ's, which would also take care of the compacts as well.  We can offer these in SS if there is sufficient demand. 

One of our goals is to share with the average owner an easy method for removing the OEM barrel bushing.  We want the average CZ owner to be able to accomplish this with a minimum of tools.  We are pretty sure we have this mapped out.

I think I might have to place an order 10 of these '10x' version..
Life is too short to waste on a bad trigger pull

Offline Mrs Armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 1386
Re: New Design CGW Barrel Bushing
« Reply #31 on: November 07, 2015, 02:00:25 PM »
nice job censoring my post about this company with rude phone/customer service. now i feel the same about this board. just like cgw, there are many boards with gun info. ill go there. take this one and shove it.

   Get you own shovel and shove it. Bye Bye

Offline schmeky

  • Moderator
  • Hero Member
  • *****
  • Posts: 2763
Re: New Design CGW Barrel Bushing
« Reply #32 on: November 07, 2015, 02:21:29 PM »
 
Quote
I'm a cranky, easily irritated, abrasive, Retired U.S. Marine.

RHINO,

If you give us a chance, I am confident we can figure out how to rub you the wrong way!!!  ;)

Offline rhart

  • Hero Member
  • *****
  • Posts: 1951
Re: New Design CGW Barrel Bushing
« Reply #33 on: November 07, 2015, 03:29:50 PM »
Schmecky, is there any before and after results on accuracy improvement? Realizing that each individual pistol will experience varying results.
Musashi:
- In all forms of strategy, it is necessary to maintain the combat stance in everyday life and to make your everyday stance your combat stance. (situational awareness).
- You can only fight the way you practice.
- If you do not control the enemy, the enemy will control you.

Offline copemech

  • Hero Member
  • *****
  • Posts: 1603
Re: New Design CGW Barrel Bushing
« Reply #34 on: November 07, 2015, 11:55:44 PM »
Quote
I'm a cranky, easily irritated, abrasive, Retired U.S. Marine.

RHINO,

If you give us a chance, I am confident we can figure out how to rub you the wrong way!!!  ;)

Hey Schmekhead, send me one for testing and evaluation.

I am sure it will cost me a high dollar FO front sight after I beat it back out! O0

Offline Rhino

  • Hero Member
  • *****
  • Posts: 663
Re: New Design CGW Barrel Bushing
« Reply #35 on: November 08, 2015, 12:17:44 AM »
Quote
I'm a cranky, easily irritated, abrasive, Retired U.S. Marine.

RHINO,

If you give us a chance, I am confident we can figure out how to rub you the wrong way!!!  ;)

Hey Schmekhead, send me one for testing and evaluation.

I am sure it will cost me a high dollar FO front sight after I beat it back out! O0

^^^^This^^^^ if you send me a free bushing to test today I'll gladly buy a new front tritium sight on Tuesday.

Offline Rhino

  • Hero Member
  • *****
  • Posts: 663
Re: New Design CGW Barrel Bushing
« Reply #36 on: November 08, 2015, 12:33:50 AM »
If you offer this only in the carbon steel variety will it be blued or in the white when you ship it? If it is shipped in the white could I do an oil quench blue on it after I get it red hot or would that change the hardness or make it warp? If it is stainless steel will it expand/contract the same as the carbon steel of the slide/barrel or will it bind up?

Offline Bishop112

  • Sr. Member
  • ****
  • Posts: 581
Re: New Design CGW Barrel Bushing
« Reply #37 on: November 08, 2015, 01:15:24 AM »
Very interesting. I would love to try one out on my stainless cz.
75B 9mm-w/CZ Custom hammer and CGW everything else
75B SA .40 S&W-work done by CZCustom
Kadet Kit
75 Compact-w/CZ Custom hammer and CGW everything else... so far...
Browning Hi-Power Practical

Offline huskerlrrp

  • Full Member
  • ***
  • Posts: 311
Re: New Design CGW Barrel Bushing
« Reply #38 on: November 08, 2015, 10:41:53 AM »
Just take my money....

Offline IPSick

  • Jr. Member
  • **
  • Posts: 92
Re: New Design CGW Barrel Bushing
« Reply #39 on: November 08, 2015, 01:01:46 PM »
ahhhhh, he was just telling me about this the other day when i called into the shop for some technical help.

love it.  will be purchasing.

my vote is for a stainless finish, or metal that we can polish at home. do not like the dark or slide match color.

Offline Firemanjones

  • Hero Member
  • *****
  • Posts: 4801
Re: New Design CGW Barrel Bushing
« Reply #40 on: November 09, 2015, 06:06:11 PM »
I am very interested in it for my 75BD!
Safety First
Living the dream, driving a Fire Engine RETIRED shooting my Guns in FL and the Mountains of NC and hanging in Mannheim.

Offline chaps

  • Full Member
  • ***
  • Posts: 130
Re: New Design CGW Barrel Bushing
« Reply #41 on: November 17, 2015, 12:29:10 AM »
Dang it, one more thing in the shopping cart!
75BD, P-01, Kadet 2 ... so far

Offline zormpas

  • Full Member
  • ***
  • Posts: 106
  • Zorba, "The Veiled Male"
    • Zorba, "The Veiled Male"
Re: New Design CGW Barrel Bushing
« Reply #42 on: November 17, 2015, 02:26:58 PM »
Sounds interesting - can I get it in hot pink or fuchsia?  O0

Offline T-BIRD

  • Jr. Member
  • **
  • Posts: 32
Re: New Design CGW Barrel Bushing
« Reply #43 on: November 24, 2015, 10:07:51 AM »
I can't wait, love to try a "spread the load bushing"
"They all suck when their broke"

Offline stuffgeek

  • Full Member
  • ***
  • Posts: 119
Re: New Design CGW Barrel Bushing
« Reply #44 on: December 04, 2015, 11:23:27 PM »
Can we order it now?

 

anything