Author Topic: Official Scorpion Picture Thread!  (Read 310547 times)

0 Members and 1 Guest are viewing this topic.

Offline WaltherP99

  • Full Member
  • ***
  • Posts: 331
Re: Official Scorpion Picture Thread!
« Reply #495 on: July 12, 2017, 03:18:38 PM »
Is that a Lage stock you have on there? I'm thinking to get one too. Which length version did you choose? How is it working for you, did you compare this with the factory folding stock? Thanks

FINALLY done! Now all I have to do is get a family pic with the rest of the CZ's!  ;)



Yes, that is a Lage on there. I am not sure what length it is as I bought it used but I believe it's the longest. It's working very well for me. Lock up is very tight. Seems to be a bit better when folded compared to the factory stock BUT my opinion may be a bit skewed. The factory stock that I tried out was one of the ones that didn't line up correctly and wouldn't fold properly. It has since been sent back to CZ for a refund as I don't wanna try another one and suffer the same outcome.

You can also eliminate the folder on the Lage and make it a non-folder. I haven't done this yet but I may try it in the future. Either way...I would recommend this stock if you are looking for an alternative to the factory folder.

Offline yrs

  • Jr. Member
  • **
  • Posts: 30
Re: Official Scorpion Picture Thread!
« Reply #496 on: July 12, 2017, 05:57:57 PM »
WaltherP99, thanks for the detailed review and info

Offline WaltherP99

  • Full Member
  • ***
  • Posts: 331
Re: Official Scorpion Picture Thread!
« Reply #497 on: July 12, 2017, 06:24:08 PM »
WaltherP99, thanks for the detailed review and info

Gald I could help.  8)

Offline Wahoo9501

  • Full Member
  • ***
  • Posts: 119
Re: Official Scorpion Picture Thread!
« Reply #498 on: July 12, 2017, 06:34:43 PM »
Is that a Lage stock you have on there? I'm thinking to get one too. Which length version did you choose? How is it working for you, did you compare this with the factory folding stock? Thanks

FINALLY done! Now all I have to do is get a family pic with the rest of the CZ's!  ;)



Yes, that is a Lage on there. I am not sure what length it is as I bought it used but I believe it's the longest. It's working very well for me. Lock up is very tight. Seems to be a bit better when folded compared to the factory stock BUT my opinion may be a bit skewed. The factory stock that I tried out was one of the ones that didn't line up correctly and wouldn't fold properly. It has since been sent back to CZ for a refund as I don't wanna try another one and suffer the same outcome.

You can also eliminate the folder on the Lage and make it a non-folder. I haven't done this yet but I may try it in the future. Either way...I would recommend this stock if you are looking for an alternative to the factory folder.
What do you mean your factory folder wouldn't fold correctly?

Sent from my SM-N910V using Tapatalk


Offline WaltherP99

  • Full Member
  • ***
  • Posts: 331
Re: Official Scorpion Picture Thread!
« Reply #499 on: July 12, 2017, 06:49:26 PM »
Is that a Lage stock you have on there? I'm thinking to get one too. Which length version did you choose? How is it working for you, did you compare this with the factory folding stock? Thanks

FINALLY done! Now all I have to do is get a family pic with the rest of the CZ's!  ;)



Yes, that is a Lage on there. I am not sure what length it is as I bought it used but I believe it's the longest. It's working very well for me. Lock up is very tight. Seems to be a bit better when folded compared to the factory stock BUT my opinion may be a bit skewed. The factory stock that I tried out was one of the ones that didn't line up correctly and wouldn't fold properly. It has since been sent back to CZ for a refund as I don't wanna try another one and suffer the same outcome.

You can also eliminate the folder on the Lage and make it a non-folder. I haven't done this yet but I may try it in the future. Either way...I would recommend this stock if you are looking for an alternative to the factory folder.
What do you mean your factory folder wouldn't fold correctly?

Sent from my SM-N910V using Tapatalk

The cut out in the factory stock for the magwell would not line up correctly so I'd have to give it a good tap to get it to fold far enough for the magnet to grab. It magnet started to mark the plate up a bit which worried me. I did some searching and from what I read it's not uncommon with some of the factory folders.

Offline Wahoo9501

  • Full Member
  • ***
  • Posts: 119
Re: Official Scorpion Picture Thread!
« Reply #500 on: July 12, 2017, 06:51:32 PM »
Ahh, mine does that. Requires me to push in forcing it to line up but it stays

Sent from my SM-N910V using Tapatalk


Offline WaltherP99

  • Full Member
  • ***
  • Posts: 331
Re: Official Scorpion Picture Thread!
« Reply #501 on: July 12, 2017, 07:20:11 PM »
Ahh, mine does that. Requires me to push in forcing it to line up but it stays

Sent from my SM-N910V using Tapatalk

Yeah...mine wouldn't stay.

Offline Silentblades

  • Full Member
  • ***
  • Posts: 128
Re: Official Scorpion Picture Thread!
« Reply #502 on: July 19, 2017, 08:40:16 PM »



Sent from my iPad using Tapatalk

Offline HBi

  • Full Member
  • ***
  • Posts: 177
    • HB Industries
Re: Official Scorpion Picture Thread!
« Reply #503 on: July 21, 2017, 06:48:13 PM »

Because Evos!

Offline wyoung

  • Full Member
  • ***
  • Posts: 174
Re: Official Scorpion Picture Thread!
« Reply #504 on: August 01, 2017, 05:45:12 AM »
Bone stock so far.



Offline 007_Bond

  • Full Member
  • ***
  • Posts: 253
Re: Official Scorpion Picture Thread!
« Reply #505 on: August 01, 2017, 07:56:17 AM »


Not much added yet but just got it Saturday.

SB Tactical SBTEVO
Manticore 32rd Mags
Yeti Wurks Switchback (2 tone)
Surefire X300 Ultra B
(Saftey Delete/Reverse is in its way)

Once I decide on a red dot / optic, that will be next plus a sling.
« Last Edit: August 01, 2017, 08:02:04 AM by 007_Bond »

Offline CaptJager

  • Jr. Member
  • **
  • Posts: 87
Re: Official Scorpion Picture Thread!
« Reply #506 on: August 02, 2017, 09:31:28 PM »


HBI 6.84 foregrip
Nightstrike diamondback AFG
Uzi Pro 32 rd Magazine with Cz Scorpion adapter
Gearheadworks Tailhook Arm brace with CJ Adapter w/ magnet to hold while folded
Primary Arms Micro dot
« Last Edit: August 02, 2017, 09:35:59 PM by CaptJager »

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 19821
Re: Official Scorpion Picture Thread!
« Reply #507 on: August 02, 2017, 09:59:50 PM »
Silent Blades, 007_Bond, VERY nice photos, thanks!

Offline 007_Bond

  • Full Member
  • ***
  • Posts: 253
Re: Official Scorpion Picture Thread!
« Reply #508 on: August 02, 2017, 11:24:17 PM »
Silent Blades, 007_Bond, VERY nice photos, thanks!

Thanks!

Offline SouthernScorp

  • Sr. Member
  • ****
  • Posts: 967
Re: Official Scorpion Picture Thread!
« Reply #509 on: August 04, 2017, 10:20:54 PM »
wonder if he gets many fail to fire, ftl or fte's loaded that way  O0
CZ Scorpion Evo S1 Pistol:

SLR Synergy Mini comp
SBT-EVO Brace
PMM Safety Levers
Dual HBI Prostock Charging Handles
Gearhead Mag Release
HBI Trigger Spring
HBI Delta Trigger
PMM QD Front & Rear
Magpul MS1 + QDs
Holosun HS515cu on ADM low mount
Vendetta VP-17-A AFG