Manticore Arms working on Bren 805 parts

[Manticore_Arms]

I have finished the redesign of the Bren 805 Slider Stock and it, along with a couple of other 805 upgrades, will be going into production after the holidays. 

Sven
Manticore Arms

[Type5]

Most wonderful- looking forward to seeing the fruit of your labor!

[BEE]

Awesome, can't wait to see.

[armoredman]

Yay for Manticore!

[Wreckless]

Great news for us all.

[wilmermj]

 Any hints on whats coming out? Thanks

[Manticore_Arms]

Any hints on whats coming out? Thanks

Sidefolder stock block (will likely be sold as part of a complete arm brace serup
By SB Tactical)

Revised and improved slider stock

Forend (narrowing it down between three designs right now)

Charging handle

Looking at safeties since the oem ones are marginal

[wilmermj]

Awesome thanks for reply. Excited for a charging handle and possibly forend depending on look/function.

[Doug_262]

How about a lighter rear sling adaptor with no sling loop on the right hand side.  For those with aftermarket stocks that want them to fold closer.  I rather buy a cheap part than try to cut the factory part.

[promotemma]

Any hints on whats coming out? Thanks

Sidefolder stock block (will likely be sold as part of a complete arm brace serup
By SB Tactical)

Revised and improved slider stock

Forend (narrowing it down between three designs right now)

Charging handle

Looking at safeties since the oem ones are marginal

I would like new safeties for the Bren!

[Erikw5490]

Hey guys, anyone have tech specs on how tight to retighten the screws when installing the new manticore rail? Anyone notice that the screws from the facory are in there SUPER TIGHT?? Like holy crap right. Any insight?

[Rick53]

Hey guys, anyone have tech specs on how tight to retighten the screws when installing the new manticore rail? Anyone notice that the screws from the facory are in there SUPER TIGHT?? Like holy crap right. Any insight?

Tight or Loctite tight?

[Erikw5490]

like maxed out my wheeler torque screwdriver at 60 in lbs tight.

[Rick53]

like maxed out my wheeler torque screwdriver at 60 in lbs tight.

60 inch pounds isn't all that tight. I have a Torx wrench designed for the Scar that is permanently set at 65 " pounds. Do you have something to use with more poundage Or a way to use a wrench with the Torx bit? You're probably just a few inch pounds off.

[Rick53]

like maxed out my wheeler torque screwdriver at 60 in lbs tight.

60 inch pounds isn't all that tight. I have a Torx wrench designed for the Scar that is permanently set at 65 " pounds. Do you have something to use with more poundage Or a way to use a wrench with the Torx bit? You're probably just a few inch pounds off.

60 inch pounds isn't all that tight. I have a Torx wrench designed for the Scar that is permanently set at 65 " pounds. Do you have something to use with more poundage Or a way to use a wrench with the Torx bit? You're probably just a few inch pounds off.  I personally don't like the wheeler unit for over 20-30 . Just because I don't trust their wrench. My guess is it's 65 . It feels tight because your wrench slips loose at 60.