Author Topic: Evo3 Detail Strip Guide  (Read 4513 times)

0 Members and 1 Guest are viewing this topic.


Offline Obiwan

  • Full Member
  • ***
  • Posts: 191
Re: Evo3 Detail Strip Guide
« Reply #16 on: May 27, 2016, 12:28:18 AM »
Yes, yes, but he doesn't take down the bolt or trigger group. This thread was in response to someone asking on how to take the bolt apart.

I don't know how many of you perform a total disassembly for cleaning. Seems a bit overkill to me. It's like insisting of taking the hammer, disconnector, and hammer strut of a CZ75 apart for cleaning. :)  I don't see the point of taking the frame halves apart every time you clean it. (of course it's required for painting). I'd be worried that the barrel is no longer true in line with the rail after repeated total disassembly and reassembly. Things (like plastic, screws) might wear out unnecessarily.

The way I see it, there's field strip (remove trigger group and take bolt assembly out), details strip (take bolt and perhaps trigger group apart for cleaning), and then complete disassembly (leave no parts connected!). Again, this thread wasn't for the complete disassembly.

But if y'all want, I can see if I can change the topic to reflect whatever you want it say (or a moderator can do that).

Offline Overwatch3r

  • Newbie
  • *
  • Posts: 3
Re: Evo3 Detail Strip Guide
« Reply #17 on: November 12, 2016, 06:54:24 PM »
Thank You!

Offline CaptJager

  • Jr. Member
  • **
  • Posts: 85
Re: Evo3 Detail Strip Guide
« Reply #18 on: January 01, 2017, 05:30:55 PM »
I hope someone will make a video showing the bolt disassembly

Offline Rick53

  • Full Member
  • ***
  • Posts: 157
Re: Evo3 Detail Strip Guide
« Reply #19 on: February 13, 2017, 06:34:35 PM »

Offline Obiwan

  • Full Member
  • ***
  • Posts: 191
Re: Evo3 Detail Strip Guide
« Reply #20 on: February 14, 2017, 01:15:12 AM »
I hope someone will make a video showing the bolt disassembly
http://apexgunsmithing.com/detail-strip-guide-cz-scorpion-evo/

Erm... yeah, that's the guide I posted in the first post of this thread. Did you look at page 1?

I think some are looking for a video on how to take the bolt apart. It's not that hard, and I hoped my instructions and pictures in Apex's guide was sufficient.

Offline Rick53

  • Full Member
  • ***
  • Posts: 157
Re: Evo3 Detail Strip Guide
« Reply #21 on: February 14, 2017, 08:10:12 AM »
I hope someone will make a video showing the bolt disassembly
http://apexgunsmithing.com/detail-strip-guide-cz-scorpion-evo/

Erm... yeah, that's the guide I posted in the first post of this thread. Did you look at page 1?

I think some are looking for a video on how to take the bolt apart. It's not that hard, and I hoped my instructions and pictures in Apex's guide was sufficient.
Yeah, I agree : I'm a little confused how someone can't see what to do with the pictures. Just pay attention to how it comes apart . I reposted because Your link didn't work for me.

Offline CaptJager

  • Jr. Member
  • **
  • Posts: 85
Re: Evo3 Detail Strip Guide
« Reply #22 on: February 15, 2017, 06:33:58 AM »
I hope someone will make a video showing the bolt disassembly
http://apexgunsmithing.com/detail-strip-guide-cz-scorpion-evo/

Erm... yeah, that's the guide I posted in the first post of this thread. Did you look at page 1?

I think some are looking for a video on how to take the bolt apart. It's not that hard, and I hoped my instructions and pictures in Apex's guide was sufficient.
I appreciate the link but I like video as a video is 30 frames per second usually. Being my post is 45 days old and now getting a reply I have had time to take the bolt apart, Thanks again for the link.

Offline intheair

  • Jr. Member
  • **
  • Posts: 60
Re: Evo3 Detail Strip Guide
« Reply #23 on: February 16, 2017, 10:49:45 PM »
TIP: I used a 2 inch mini c-clamp to block the trigger pack return spring, before putting the hammer stuff on its pin.  Made it very easy.

Offline smokerheat

  • Newbie
  • *
  • Posts: 26
Re: Evo3 Detail Strip Guide
« Reply #24 on: June 08, 2017, 02:30:49 PM »
Thank you i needed this.