« previous next »
Pages: [1]   Go Down

Author Topic: speed loader  (Read 1320 times)

0 Members and 1 Guest are viewing this topic.

Hidurango

  • Guest
speed loader
« on: March 12, 2006, 09:45:08 PM »
Anyone know of a speed loader for the magazines that come with the conversion kit.
Logged

Offline Dan0341

  • Jr. Member
  • **
  • Posts: 36
speed loader
« Reply #1 on: March 13, 2006, 07:57:30 AM »
I tried to post a link, but couldn't get it to work.  If you look back on page 2 you'll see a thread (from Dec 17) discussing speed loaders.  
           
            Dan
Logged

CZJedi

  • Guest
speed loader
« Reply #2 on: March 13, 2006, 02:26:24 PM »
Yea, look at the December thread... I tried it, and it works great. I used safty razor to cut it down, but if you have a dremmel, it would probably go much quicker.
Logged

Offline jodavis

  • Jr. Member
  • **
  • Posts: 15
speed loader
« Reply #3 on: April 12, 2006, 09:37:02 AM »
i took a HKS speed loader (model GL-940) which is the cz75 9mm loader and with a little dremel time to modify/trim the follower depressing hook works just fine with my kadet mags.
            it has been a blessing since the metal fins on the kadet mags
            will rip your thumb apart after a while.
            the trim work is very basic in that all you have to do is narrow
            the (plastic) hook to clear the metal on the top of the mag
Logged

Offline RbtMartin

  • Full Member
  • ***
  • Posts: 125
speed loader
« Reply #4 on: April 12, 2006, 11:48:23 AM »
I modified the HKS Spped loader using my trusty Dremel and now I use the same loader on my Kadet Mags and my 9mm Mags.
           
            It not hard to do... Just shave some off and try it. Then shave off some more till you get it fit in the Kadet Mag.
           
Logged
Pages: [1]   Go Up
« previous next »