Author Topic: Drill Bit for Welded Trigger Pack - Pay it Forward (Read 133491 times)

yankee · « **Reply #195 on:** December 02, 2016, 08:57:51 AM »

For those not on the list of just impatient like me, Home Depot has a 3/16 Hard Steel bit at most stores that works for this job. took me literally 10 seconds to drill out the weld with this Bit. for $3.

http://www.homedepot.com/p/BLU-MOL-3-16-in-Dia-Xtreme-Cobalt-Jobber-Drill-Bit-3291/205791958

tiny705 · « **Reply #196 on:** December 02, 2016, 11:39:22 PM »

You had better luck than I did. I tried the Cobalt bit from Home Depot and after about 20 minutes it barely made a dimple in the weld.

SneakySh0rty · « **Reply #197 on:** December 07, 2016, 09:32:50 PM »

received the drill bit from b_cole. Ill drill it out by this weekend..

streets ahead · « **Reply #198 on:** December 08, 2016, 07:36:09 PM »

Can I get added to the list, please?

Phil413 · « **Reply #199 on:** December 09, 2016, 12:04:58 AM »

Pls take me off the list. I was able to drill it out myself.

Thankd
Phil413

Sent from my iPad using Tapatalk

Artichoak · « **Reply #200 on:** December 10, 2016, 09:28:05 AM »

Grabbed a cobalt bit from the hardware store for $2, took about 20 seconds to drill out going slow. Thanks for the tip!

SneakySh0rty · « **Reply #201 on:** December 10, 2016, 01:35:18 PM »

following HBi's instructions
SneakySh0rty
tiny705
streets ahead

streets ahead · « **Reply #202 on:** December 16, 2016, 10:11:34 PM »

Are there still multiple bits floating around, or is it just down to the one?

SneakySh0rty · « **Reply #203 on:** December 20, 2016, 02:16:38 PM »

Not sure if there is more than one. But, the one I had I mailed out to Tiny last week.

Nightst0ne · « **Reply #204 on:** December 22, 2016, 06:27:39 PM »

I need the drill #204?

I don't know if that is the correct number.

streets ahead · « **Reply #205 on:** December 27, 2016, 12:49:03 AM »

Please take me off the list. Burned out a couple non-carbide bits, and it wasn't pretty, but it's out.

ArmedOne · « **Reply #206 on:** January 11, 2017, 03:01:51 PM »

Can I get in on this?

ArmedOne · « **Reply #207 on:** January 17, 2017, 10:36:00 PM »

Never mind. I got it.

Wlopez · « **Reply #208 on:** January 21, 2017, 05:22:13 AM »

I hope this is still going a around I live out in Alaska

omnidj · « **Reply #209 on:** January 31, 2017, 02:01:16 AM »

If the list isn't too long, I'm interested in joining it

The Original CZ Forum