Author Topic: Yeti Wurks Switchback Grips  (Read 20364 times)

0 Members and 2 Guests are viewing this topic.

Offline yetisoldier

  • Sr. Member
  • ****
  • Posts: 299
Re: Yeti Wurks Switchback Grips
« Reply #255 on: July 30, 2017, 04:05:12 PM »
Is it normal for the stock screw to be too long for attaching the Yeti Wurks Switback grip?

Unless I thread it beyond "flush" the grip doesn't stay tight or locked down. I tried using be screws supplied with the grip but they don't reach and don't work.
Try a shorter one again. Usually after tightening it down once they will reach.


Sent from my ONEPLUS A5000 using Tapatalk


Offline yetisoldier

  • Sr. Member
  • ****
  • Posts: 299
Re: Yeti Wurks Switchback Grips
« Reply #256 on: July 30, 2017, 04:06:07 PM »
Someone must have done what I've thought about doing...?

Buy the stock from CZ, and buy the tailhook separately and assemble it yourself.
There is a bit more needed than that. You also need an adapter for the tailhook brace to attach the folding assembly.

Sent from my ONEPLUS A5000 using Tapatalk


Offline 007_Bond

  • Full Member
  • ***
  • Posts: 132
Re: Yeti Wurks Switchback Grips
« Reply #257 on: July 31, 2017, 09:31:26 AM »
Is it normal for the stock screw to be too long for attaching the Yeti Wurks Switback grip?

Unless I thread it beyond "flush" the grip doesn't stay tight or locked down. I tried using be screws supplied with the grip but they don't reach and don't work.
Try a shorter one again. Usually after tightening it down once they will reach.


Sent from my ONEPLUS A5000 using Tapatalk

Thx. I'll try it out

Offline 007_Bond

  • Full Member
  • ***
  • Posts: 132
Re: Yeti Wurks Switchback Grips
« Reply #258 on: August 02, 2017, 08:55:17 PM »
So I decided to get the FDE Switchback and cerakote it the right color. That'll work for now.

I figured since the current FDE is Gen 1 and it'll be awhile before gen 2 comes out, and the current FDE Switchback is discounted ... this was the best option for now and for not much more.
« Last Edit: August 02, 2017, 09:01:03 PM by 007_Bond »

Offline 007_Bond

  • Full Member
  • ***
  • Posts: 132
Re: Yeti Wurks Switchback Grips
« Reply #259 on: August 30, 2017, 03:54:26 AM »
Hey guys. Just thought I'd give a slight update. The guys at Yeti Wurks have amazing customer service and really have taking care of the customer as a high priory and value. I appreciate that about them. With that said, I decided to go back to the stock grip as I just ran into too many issues with the Yeti Wurks Switchback grip for the Scorpion personally. As much as I like the Switchback, the factory grip just feels much more solid and higher quality so I'm gonna stick with it for now.

But I do have strong hopes that they will release an upgraded product for the future.

Offline yetisoldier

  • Sr. Member
  • ****
  • Posts: 299
Re: Yeti Wurks Switchback Grips
« Reply #260 on: September 08, 2017, 09:29:04 AM »
Thought I would give a small update. Earlier this week I started selling the Switchback grips with a new style insert. These have eliminated all of the issues some people had with the previous style. I have it listed as gen 2.5.

Sent from my ONEPLUS A5000 using Tapatalk


Offline Border Dave

  • Full Member
  • ***
  • Posts: 249
Re: Yeti Wurks Switchback Grips
« Reply #261 on: September 08, 2017, 12:20:57 PM »
Thought I would give a small update. Earlier this week I started selling the Switchback grips with a new style insert. These have eliminated all of the issues some people had with the previous style.

Does the new grip still have the sharp edges on the front or have you smoothed it out?

Are you offering a discount for customers who bought one of the prior models?
« Last Edit: September 08, 2017, 12:29:08 PM by Border Dave »

Offline UCLAFANBRIAN

  • Newbie
  • *
  • Posts: 3
Re: Yeti Wurks Switchback Grips
« Reply #262 on: September 08, 2017, 09:02:18 PM »
So contacted Yeti Wurks about my my grips nut inset breaking on installation today and asked to purchase a new screw and nut and he responded by him going to send me out a completely new grip Sunday and upgrade me to the 2.5! Talk about class act. I am very impressed with the customer service and will recommend this grip over all others. The 2nd gen is nice enough. I have it all the way forward and can field strip no problems. But the 2.5 is going to be great. Thanks Yeti Wurks!
« Last Edit: September 09, 2017, 12:33:04 AM by UCLAFANBRIAN »

Offline yetisoldier

  • Sr. Member
  • ****
  • Posts: 299
Re: Yeti Wurks Switchback Grips
« Reply #263 on: September 08, 2017, 09:15:38 PM »
Thought I would give a small update. Earlier this week I started selling the Switchback grips with a new style insert. These have eliminated all of the issues some people had with the previous style.

Does the new grip still have the sharp edges on the front or have you smoothed it out?

Are you offering a discount for customers who bought one of the prior models?
No mold changes yet so the front is the same. Right now if you already have a grip that is working well there isn't really a reason to get a new one. The change is pretty minor so right now I don't have a discount.

Sent from my ONEPLUS A5000 using Tapatalk


Offline mikeinak

  • Newbie
  • *
  • Posts: 1
Re: Yeti Wurks Switchback Grips
« Reply #264 on: September 14, 2017, 04:03:19 PM »
Please make some of these in FDE.

Offline UCLAFANBRIAN

  • Newbie
  • *
  • Posts: 3
Re: Yeti Wurks Switchback Grips
« Reply #265 on: September 14, 2017, 08:58:16 PM »
Received my 2.5 and it's the Sh!t very nice grip I love it. I used the factory grip screw so they are all the same and no overhang past the nut whatsoever.

 

anything