Author Topic: Uh-oh, could it be...  (Read 1373 times)

0 Members and 1 Guest are viewing this topic.

Offline Cyanide

  • Hero Member
  • *****
  • Posts: 1103
Uh-oh, could it be...
« on: October 08, 2016, 12:10:10 AM »
Found another stray CZ 100 to adopt, but this one is a .40 model. Put it on layaway from a GB vendor, and after I can get it paid for in full, I am going to swap out the stock recoil spring and plastic guide rod for a Wolff Glock 19 steel guide rod and 24# recoil spring per the archives of Old Coastie's writings. A few vendor-supplied pics:









Offline 762hurts

  • Full Member
  • ***
  • Posts: 112
Re: Uh-oh, could it be...
« Reply #1 on: November 13, 2016, 03:00:26 AM »
Is that 3?

Offline Cyanide

  • Hero Member
  • *****
  • Posts: 1103
Re: Uh-oh, could it be...
« Reply #2 on: November 16, 2016, 07:36:52 PM »
Is that 3?
Technically yes, but I sold the first one I had to a friend last year (the traditional U.S. model w/adjustable sights, grooved trigger, LCI pin, open bottom trigger guard).

Offline 762hurts

  • Full Member
  • ***
  • Posts: 112
Re: Uh-oh, could it be...
« Reply #3 on: November 18, 2016, 12:56:06 AM »
I want a newer 9 with fixed sights and loaded chamber indicator with trigger guard cutout. Then I'll have a perfect combo of both my 100's!

I don't hate the plastic sights like I thought I would. The target sights I'd love to have tritium put in.

Offline AZ_CZ

  • Hero Member
  • *****
  • Posts: 2409
Re: Uh-oh, could it be...
« Reply #4 on: November 18, 2016, 08:38:01 AM »
Sweet!


CZ Fanbot since 1996

Offline ac

  • Newbie
  • *
  • Posts: 20
Re: Uh-oh, could it be...
« Reply #5 on: February 06, 2017, 06:44:12 AM »
Cyanide, can you do a before/after post giving your impression as a shooter when you make the swap of standard springs/recoil rod to the 24#/ Glock rod?
I don't shoot my 100 enough anymore, but I like to tinker and love to max out the user experience when I do.  Thanks in advance
Ac

Offline Tok36

  • Hero Member
  • *****
  • Posts: 3408
Re: Uh-oh, could it be...
« Reply #6 on: February 06, 2017, 07:48:22 AM »
Thank goodness that you are around to save these poor lonely CZs Cyanide. ;D A noble endeavor if I ever saw one. Gratz on the new addition to the gang!
Will work for CZ pics! (including but not limited to all CZ clones)

Offline Cyanide

  • Hero Member
  • *****
  • Posts: 1103
Re: Uh-oh, could it be...
« Reply #7 on: February 06, 2017, 04:59:42 PM »
Cyanide, can you do a before/after post giving your impression as a shooter when you make the swap of standard springs/recoil rod to the 24#/ Glock rod?
I don't shoot my 100 enough anymore, but I like to tinker and love to max out the user experience when I do.  Thanks in advance
Ac
I sure will!

Thank goodness that you are around to save these poor lonely CZs Cyanide. ;D A noble endeavor if I ever saw one. Gratz on the new addition to the gang!
It's a tough job, but somebody's got to do it. Thankfully I have 762hurts as my trusty assistant in this endeavor!

Offline Cyanide

  • Hero Member
  • *****
  • Posts: 1103
Uh-oh, could it be...
« Reply #8 on: April 13, 2017, 08:11:40 PM »
Haven't been able to get it to the range yet, but here is my newest addition beside it's (modified) little 9mm brother:





I've already installed the Wolff steel guide rod and 24# recoil spring, and it makes one heck of a noticeable difference on exertion of force to rack the slide. Something tells me that between it and the factory ported barrel, felt recoil is going to be much less than with the stock set up.

On a side note, now to get my Gen 4 Glock 23 out of layaway ASAP so that I can shoot both of them side-by-sideā€¦

If anyone would like more pictures, just tell me what angle of the pistol y'all would like to see. There's nothing really different between this and the 9mm model besides the ported barrel and smaller magazine capacity (10 vs 13).