Author Topic: Welded Trigger Pack  (Read 2314 times)

0 Members and 1 Guest are viewing this topic.

Offline Old Dominion

  • Full Member
  • ***
  • Posts: 160
Re: Welded Trigger Pack
« Reply #30 on: January 11, 2017, 04:30:27 PM »
I had a time removing mine. I had to use diamond tip bits and a dremil. I had to go all the way down to the bottom of the collar.
*CZ Scorpion EVO 3 S1 Carbine
*CZ 612HC-P 12Ga.
*CZ 75B Compact L
*CZ 75 P06
*CZ 75 SP01 Tac. 9
*CZ 75 ('91 pre B)
*CZ 75B Limited Ed. Stainless
*Dan Wesson Valor SS Government

Offline Headspace

  • Newbie
  • *
  • Posts: 41
Re: Welded Trigger Pack
« Reply #31 on: January 11, 2017, 06:44:53 PM »
I just broke mine free using a Dremel grinding stone #953.

Took less than 5 min using a 90 degree attachment @ 35k rpm's.

Cost less than $5 for a 2 pack from Home depot.

Worth a try.

Offline photog22740

  • Newbie
  • *
  • Posts: 35
Re: Welded Trigger Pack
« Reply #32 on: January 11, 2017, 07:41:05 PM »
Stupid question.  Why remove the trigger weld?  To work on the trigger, or be able to replace parts to meet the requirements of U.S. parts for SBR?  Both?  Thanks much for the insight.  I filled out that form with CZ to have the swap, but not even sure i need to.

Offline NOLAGT

  • Newbie
  • *
  • Posts: 13
Re: Welded Trigger Pack
« Reply #33 on: January 11, 2017, 07:57:32 PM »
I did it to put in a HBI spring and trigger.

Offline jkL

  • Newbie
  • *
  • Posts: 14
Re: Welded Trigger Pack
« Reply #34 on: January 11, 2017, 08:29:34 PM »
i tried using a drill but botched it. the drill bit wasnt centered and i ended up kind of fusing the collar and screw together. had to keep going until the collar was completely broken off. i got it off with minimal damage inside the trigger pack, definitely wasnt fun

Offline NOLAGT

  • Newbie
  • *
  • Posts: 13
Re: Welded Trigger Pack
« Reply #35 on: January 11, 2017, 08:55:56 PM »
That's what happened to me.

Offline tattooo

  • Sr. Member
  • ****
  • Posts: 314
Re: Welded Trigger Pack
« Reply #36 on: January 11, 2017, 09:16:25 PM »
Mine was a PITA without a carbide bit but broke free in around 20 minutes of patient drilling.

Offline CaptJager

  • Jr. Member
  • **
  • Posts: 85
Re: Welded Trigger Pack
« Reply #37 on: January 11, 2017, 09:19:59 PM »
Stupid question.  Why remove the trigger weld?  To work on the trigger, or be able to replace parts to meet the requirements of U.S. parts for SBR?  Both?  Thanks much for the insight.  I filled out that form with CZ to have the swap, but not even sure i need to.
Both mostly, youwill at a minimum want to polish and put in HBI springs or CZ Customs Trigger pack. But for those with the pistol and want to SBR the US parts as well.

If you dont want to remove yourself eMGunslinger does it For $22. He is basically catching up with work this week but told me to ship next week when I talked to him today.
« Last Edit: January 11, 2017, 09:25:17 PM by CaptJager »

Offline NOLAGT

  • Newbie
  • *
  • Posts: 13
Re: Welded Trigger Pack
« Reply #38 on: January 11, 2017, 10:02:47 PM »
Is there any vids or something of what and how to polish the trigger parts?

Offline photog22740

  • Newbie
  • *
  • Posts: 35
Re: Welded Trigger Pack
« Reply #39 on: January 12, 2017, 06:50:49 AM »
Stupid question.  Why remove the trigger weld?  To work on the trigger, or be able to replace parts to meet the requirements of U.S. parts for SBR?  Both?  Thanks much for the insight.  I filled out that form with CZ to have the swap, but not even sure i need to.
Both mostly, youwill at a minimum want to polish and put in HBI springs or CZ Customs Trigger pack. But for those with the pistol and want to SBR the US parts as well.

If you dont want to remove yourself eMGunslinger does it For $22. He is basically catching up with work this week but told me to ship next week when I talked to him today.

Thanks much for the detailed reply.

Offline Tenbones

  • Sr. Member
  • ****
  • Posts: 260
Re: Welded Trigger Pack
« Reply #40 on: January 12, 2017, 02:21:42 PM »
Is there any vids or something of what and how to polish the trigger parts?



Offline Jippa

  • Newbie
  • *
  • Posts: 11
Re: Welded Trigger Pack
« Reply #41 on: January 12, 2017, 03:16:23 PM »
If you guys ever need help with them I only charge $22 shipped back and do your HBI trigger parts installs as well.
Usually do 10 or so a week

So with the weld still in place, what do we ship to you?

Offline jkL

  • Newbie
  • *
  • Posts: 14
Re: Welded Trigger Pack
« Reply #42 on: January 12, 2017, 10:10:42 PM »
If you guys ever need help with them I only charge $22 shipped back and do your HBI trigger parts installs as well.
Usually do 10 or so a week

So with the weld still in place, what do we ship to you?
the whole trigger pack assembly.
$22 for return shipping and install is a great deal, if i could do it again, id skip the headache and do this

Offline mauikiteman

  • Jr. Member
  • **
  • Posts: 51
Re: Welded Trigger Pack
« Reply #43 on: January 17, 2017, 12:20:41 PM »
My weld was terrible as well but an hour later and it's done.

Going to install the HBI spring. 

There have been many mentions of polishing the trigger parts while you have them out.

Polish with what?  Is there a thread in that?

Thank you.


Sent from my iPhone using Tapatalk

Offline NOLAGT

  • Newbie
  • *
  • Posts: 13
Re: Welded Trigger Pack
« Reply #44 on: January 17, 2017, 12:26:08 PM »
Is there any vids or something of what and how to polish the trigger parts?




3 post up lol