Author Topic: Welded Trigger Pack  (Read 2323 times)

0 Members and 1 Guest are viewing this topic.

Offline mauikiteman

  • Jr. Member
  • **
  • Posts: 51
Re: Welded Trigger Pack
« Reply #45 on: January 17, 2017, 12:43:54 PM »
This video does a great job of explaining parts to polish, but with what material?
Thanks again!


Sent from my iPhone using Tapatalk

Offline ethangsmith

  • Jr. Member
  • **
  • Posts: 65
Re: Welded Trigger Pack
« Reply #46 on: October 02, 2017, 07:31:39 PM »
Just followed the online instructions on how to drill mine and really screwed up. Bolt snapped off at both ends. Couldn't drill the nut off as it was completely welded. Had to chisel it off, which made a really sloppy job. Then the bolt head broke off the second I put any force to it. Anyone want to remove the rest of the bolt and install a new one for me?
« Last Edit: October 02, 2017, 07:41:18 PM by ethangsmith »
2075 RAMI 9mm
52
70
75 Pre-B
75 BD POLICE
75 compact duo tone
75 compact D PCR
75 Tactical Sport
P01 duo tone
82
83
85 duo tone
452 Ultra Lux.

Offline ethangsmith

  • Jr. Member
  • **
  • Posts: 65
Re: Welded Trigger Pack
« Reply #47 on: October 02, 2017, 09:49:42 PM »
Ok. FINALLY got the whole screw out and everything cleaned up. I sanded off my scratches made during the extraction and it doesn't look too shabby. I ordered a new screw from CZ. Hopefully this works.....
2075 RAMI 9mm
52
70
75 Pre-B
75 BD POLICE
75 compact duo tone
75 compact D PCR
75 Tactical Sport
P01 duo tone
82
83
85 duo tone
452 Ultra Lux.

Offline intheair

  • Jr. Member
  • **
  • Posts: 74
Re: Welded Trigger Pack
« Reply #48 on: October 07, 2017, 03:04:46 PM »
I used a home depot "for metal bit"  5 bucks and an old hand crank drill I had and some high grade oil I had. Put some tape on the bit to protect things, took about 5 minutes of cranking. 

Offline ethangsmith

  • Jr. Member
  • **
  • Posts: 65
Re: Welded Trigger Pack
« Reply #49 on: October 07, 2017, 05:54:06 PM »
I wasn't that lucky. There was weld ALL OVER the place in there. Looking at the other pictures posted on here, someone did a mega weld on mine.
2075 RAMI 9mm
52
70
75 Pre-B
75 BD POLICE
75 compact duo tone
75 compact D PCR
75 Tactical Sport
P01 duo tone
82
83
85 duo tone
452 Ultra Lux.

Offline Thrillbilly

  • Full Member
  • ***
  • Posts: 120
Re: Welded Trigger Pack
« Reply #50 on: October 08, 2017, 08:51:26 AM »
I used a home depot "for metal bit"  5 bucks and an old hand crank drill I had and some high grade oil I had. Put some tape on the bit to protect things, took about 5 minutes of cranking.

Cool. I didn’t know the Amish were into guns. Do y’all run a newsletter on a printing press that I can send a rider out to get?

 O0  ;D

Offline intheair

  • Jr. Member
  • **
  • Posts: 74
Re: Welded Trigger Pack
« Reply #51 on: October 08, 2017, 11:39:13 AM »
Never have to worry about it being charged up.  It is a USA made Stanley lightweight and compact. QDoes not make noise either.