Author Topic: UPLULA loader for EVO  (Read 2492 times)

0 Members and 1 Guest are viewing this topic.

Offline majulook

  • Jr. Member
  • **
  • Posts: 60
UPLULA loader for EVO
« on: February 26, 2017, 11:09:21 AM »
Just saw this .....

Available in March 2017

http://www.maglula.com/product/cz-scorpion-evo-3-lula-9mm/

Offline TITAN308

  • Sr. Member
  • ****
  • Posts: 255
Re: UPLULA loader for EVO
« Reply #1 on: February 26, 2017, 11:22:59 AM »
Going to pretty much put every other type of crude loader out of business.

gg  *bookmarked and ready to buy*

Offline Border Dave

  • Sr. Member
  • ****
  • Posts: 250
Re: UPLULA loader for EVO
« Reply #2 on: February 26, 2017, 01:00:50 PM »
Just saw this .....

Available in March 2017

http://www.maglula.com/product/cz-scorpion-evo-3-lula-9mm/

It says "Available May 2017" on the website.

Good find.  I'll look forward to getting one of those.

Online st381183

  • Full Member
  • ***
  • Posts: 129
Re: UPLULA loader for EVO
« Reply #3 on: February 26, 2017, 02:33:48 PM »
« Last Edit: February 26, 2017, 02:38:36 PM by st381183 »

Offline akuser47

  • Hero Member
  • *****
  • Posts: 876
Re: UPLULA loader for EVO
« Reply #4 on: February 26, 2017, 03:11:45 PM »
Depending on price this may be my choice not super fast like a plate but easy and small.

Offline Hutehund

  • Jr. Member
  • **
  • Posts: 64
Re: UPLULA loader for EVO
« Reply #5 on: February 26, 2017, 07:51:48 PM »
I wonder if it will work on the new Manticore Arms metal feed lip EVO mags?
Take responsibility for your actions.

Offline bobwire

  • Newbie
  • *
  • Posts: 16
Re: UPLULA loader for EVO
« Reply #6 on: February 27, 2017, 12:21:31 PM »
I use these for other guns and really like them. I'm going to have one when they come out. Thanks.

Offline akuser47

  • Hero Member
  • *****
  • Posts: 876
Re: UPLULA loader for EVO
« Reply #7 on: February 27, 2017, 07:22:34 PM »
It should work on the PGS mags by Manticore. As it's designed to fit over the top of the OE mag body and simply push the round into the mag body with a clever lever in place of our thumbs. PGS mags fit into the same guns so I would think it's not to much to assume this will be all gtg.

Offline SouthernScorp

  • Hero Member
  • *****
  • Posts: 841
.
« Reply #8 on: March 02, 2017, 04:54:52 PM »
Who wants to load 1 round at a time when Rapidfiretek is all aluminum and you can shove in up to a full 30 at once.

Edit*

On second thought, I'll probably get both. I ordered the rapidfire a couple days ago so it's not on hand yet but I can already tell it's not carry-around with you friendly. But when all 5 mags are empty at a time "even more mags when I buy some manticore's once avail" using speed loaders sure as heck beats loading 150rnds by hand especially when they are getting sheet metal feed lips in the aftermarket.
« Last Edit: March 02, 2017, 06:47:43 PM by SouthernScorp »
CZ Scorpion Evo S1 Pistol:

SLR Synergy Mini comp
SBT-EVO Brace
PMM Safety Levers
Dual HBI Prostock Charging Handles
Gearhead Mag Release
HBI Trigger Spring
HBI Delta Trigger
PMM QD Front & Rear
Magpul MS1 + QDs
Holosun HS515cu on ADM low mount
Vendetta VP-17-A AFG

Offline jameslovesjammie

  • Hero Member
  • *****
  • Posts: 4452
  • The Last Best Place
Re: UPLULA loader for EVO
« Reply #9 on: March 02, 2017, 09:35:23 PM »
I will also get one of each.  The bench loader would be nice for at home, but the Maglula would fit much nicer in my range bag.

Offline SouthernScorp

  • Hero Member
  • *****
  • Posts: 841
Re: UPLULA loader for EVO
« Reply #10 on: March 02, 2017, 10:57:32 PM »
I will also get one of each.  The bench loader would be nice for at home, but the Maglula would fit much nicer in my range bag.

exactly. might even mount it to my reloading bench with the dillon
CZ Scorpion Evo S1 Pistol:

SLR Synergy Mini comp
SBT-EVO Brace
PMM Safety Levers
Dual HBI Prostock Charging Handles
Gearhead Mag Release
HBI Trigger Spring
HBI Delta Trigger
PMM QD Front & Rear
Magpul MS1 + QDs
Holosun HS515cu on ADM low mount
Vendetta VP-17-A AFG

Offline TheLocNar

  • Sr. Member
  • ****
  • Posts: 260
Re: UPLULA loader for EVO
« Reply #11 on: April 30, 2017, 03:43:33 PM »
Maglula now says "Available:  May 10. Preorder at Brownells and MidwayUSA"

Unsure when they added this to the page. Searching MUSA and Brownells comes up empty. But it looks like this will be out real soon!

Offline chaos19671

  • Newbie
  • *
  • Posts: 47
Re: UPLULA loader for EVO
« Reply #12 on: April 30, 2017, 04:00:24 PM »
i haev the plate.us
https://plate.us/collections/acem-magazine-loaders/products/acem-cz-s9-30-gen-4

it loads my factory and my UZI mags with the UZI adapter

won't ever do 1's or 2's for this ever again!


Offline eastman

  • Hero Member
  • *****
  • Posts: 1456
Re: UPLULA loader for EVO
« Reply #13 on: April 30, 2017, 07:33:54 PM »
Once these are available, I'm going to have to buy one to put in the mandolin case with the Scorpion.
I don't look like my avatar!

Offline Fate

  • Jr. Member
  • **
  • Posts: 94
Re: UPLULA loader for EVO
« Reply #14 on: May 27, 2017, 11:55:39 AM »
Yesterday I received my Uplula for the scorpion. I love it. Extremely similar to their model for AR15 mags. I loaded 6 mags effortlessly. Money well spent.  8)

 

anything