Author Topic: Pre B CZ 85 trigger parts  (Read 2469 times)

0 Members and 1 Guest are viewing this topic.

Offline Jer60

  • Newbie
  • *
  • Posts: 16
Pre B CZ 85 trigger parts
« on: March 15, 2017, 03:27:11 PM »
I have a 1991 CZ 85, B05XX, that still has the original long-reach trigger, trigger pin, and trigger return spring. Will he newer, shorter-reach trigger and improved trigger pin and return spring work in a Pre B pistol?

Offline afultz075

  • Full Member
  • ***
  • Posts: 219
Re: Pre B CZ 85 trigger parts
« Reply #1 on: March 15, 2017, 03:29:53 PM »
The new trigger will work but you are stuck with the original press-fit solid pin unless you get the trigger pin hole reamed out - the new-style trigger pins are ever so slightly thicker.

Offline Jer60

  • Newbie
  • *
  • Posts: 16
Re: Pre B CZ 85 trigger parts
« Reply #2 on: March 15, 2017, 03:36:54 PM »
Thank you. How about the new improved trigger return spring?

Offline afultz075

  • Full Member
  • ***
  • Posts: 219
Re: Pre B CZ 85 trigger parts
« Reply #3 on: March 15, 2017, 04:47:16 PM »
New Trigger spring will work just fine.

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 5166
Re: Pre B CZ 85 trigger parts
« Reply #4 on: March 15, 2017, 04:48:28 PM »
The new trigger will work but you are stuck with the original press-fit solid pin unless you get the trigger pin hole reamed out - the new-style trigger pins are ever so slightly thicker.
I have CGW floating trigger pins in both of my pre-b's. Are the 85's different?

Offline afultz075

  • Full Member
  • ***
  • Posts: 219
Re: Pre B CZ 85 trigger parts
« Reply #5 on: March 15, 2017, 05:04:34 PM »
Some Pre-B's have the current style pins. If the frame does not have the little depression around the pin hole like modern frames have, then it uses the old-style press fit pin.

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 5166
Re: Pre B CZ 85 trigger parts
« Reply #6 on: March 15, 2017, 05:08:24 PM »
Some Pre-B's have the current style pins. If the frame does not have the little depression around the pin hole like modern frames have, then it uses the old-style press fit pin.
Good to know, thanks.

Offline Jer60

  • Newbie
  • *
  • Posts: 16
Re: Pre B CZ 85 trigger parts
« Reply #7 on: March 15, 2017, 06:16:43 PM »
Ok, can you tell from these photos of the gun in question if it will take the new pin?




Offline afultz075

  • Full Member
  • ***
  • Posts: 219
Re: Pre B CZ 85 trigger parts
« Reply #8 on: March 15, 2017, 07:58:31 PM »
That will take a new style pin.

Nice gun. Blued finish?

Offline M1A4ME

  • Hero Member
  • *****
  • Posts: 7453
  • I've shot the rest, I now own the best - CZ
Re: Pre B CZ 85 trigger parts
« Reply #9 on: March 15, 2017, 08:43:51 PM »
So that's why the "new floating" trigger pin was hard to drive in.  I just figured it was because of the cerakote on/in the frame.  Oh well, I don't intend to drive it back out anytime soon.  Hard to install in my old style trigger pin Pre B CZ 85 I mean.
I just keep wasting time and money on other brands trying to find/make one shoot like my P07 and P09.  What is wrong with me?

Offline Jer60

  • Newbie
  • *
  • Posts: 16
Re: Pre B CZ 85 trigger parts
« Reply #10 on: March 15, 2017, 09:09:00 PM »
That will take a new style pin.

Nice gun. Blued finish?

Yes it is. I've had it since '92. Here's a photo of it with an '09 CZ 85B.

 

anything