Author Topic: New TriStar/Canik Products Coming  (Read 3117 times)

0 Members and 1 Guest are viewing this topic.

Offline Mr.Bro

  • Newbie
  • *
  • Posts: 8
Re: New TriStar/Canik Products Coming
« Reply #15 on: April 02, 2017, 10:14:44 AM »
I posted on a thread a little while back about being disappointed in the Tristar support going down, especially right after I purchased a P120 just to do all the CGW work! Nice to see them respond to their customers and I will be making my orders soon enough!

Offline mannym

  • Newbie
  • *
  • Posts: 12
Re: New TriStar/Canik Products Coming
« Reply #16 on: April 10, 2017, 10:45:50 AM »
I went out and bought an S-120 because I figured a P-120 wouldn't compare to my SP-01 and I am currently 75b less so it all worked out. Are you guys planning on doing hammer kits that will keep these guns production legal?
CZ SP-01 Tactical, CZ P-09, M&P 9 Pro, Mac 3011, Sar K2-45, Tristar S-120

Offline John A.

  • Hero Member
  • *****
  • Posts: 1281
Re: New TriStar/Canik Products Coming
« Reply #17 on: April 10, 2017, 11:36:52 AM »
Glad CGW is supporting the canik line.
When people ignorant of guns make gun laws, you end up with ignorant gun laws.

Offline The77boudreau

  • Newbie
  • *
  • Posts: 32
Re: New TriStar/Canik Products Coming
« Reply #18 on: April 10, 2017, 08:47:35 PM »
     I was excited about a production legal hammer too and then realized why their hammer for CZs is legal. It's available on the custom shop guns from the factory if I'm not mistaken (As a CZ Custom Hammer). Therefore it's a 'production' part...unfortunately, with my take on the rules, since it's a visible part and not offered on the Tristar/Canik from the factory it would NOT be production legal.

     I imagine you could slide by in local matches but it would be a no-go at a major or area match. I may be way off here and we can hope.

Offline h8louzn

  • Jr. Member
  • **
  • Posts: 66
Re: New TriStar/Canik Products Coming
« Reply #19 on: May 04, 2017, 12:33:36 AM »
Any update on parts yet?

Offline schmeky

  • Moderator
  • Hero Member
  • *****
  • Posts: 2609
Re: New TriStar/Canik Products Coming
« Reply #20 on: May 04, 2017, 03:43:46 PM »
We get some barrel bushings on 5-3-17 for the full size guns.  They will be on the website in the next 5-7 days. 

Single action only triggers will be cut on 5-5. 

Hammer kits are waiting a special screw for the sear adjuster, should have these in the next 2 weeks.

Offline h8louzn

  • Jr. Member
  • **
  • Posts: 66
Re: New TriStar/Canik Products Coming
« Reply #21 on: May 09, 2017, 01:34:16 AM »
Good news.. Have my cc ready!

Offline Usmo

  • Jr. Member
  • **
  • Posts: 57
Re: New TriStar/Canik Products Coming
« Reply #22 on: May 09, 2017, 06:28:39 PM »
I just saw today that my barrel bushing is missing from my t-100 which has been in the safe. Will you guys be getting any of those?

Offline schmeky

  • Moderator
  • Hero Member
  • *****
  • Posts: 2609
Re: New TriStar/Canik Products Coming
« Reply #23 on: May 10, 2017, 10:32:11 AM »
New barrel bushing for full size Canik's are now available.  Single Action only triggers will be on line this week.  Hammer kits will follow very soon:
https://cajungunworks.com/product/36220-canik-tristar-barrel-bushing/

Offline John A.

  • Hero Member
  • *****
  • Posts: 1281
Re: New TriStar/Canik Products Coming
« Reply #24 on: May 10, 2017, 10:37:36 AM »
Does this fit the S-120 too?  I noticed that you didn't specifically mention it in the product description, so that's why I asked.
When people ignorant of guns make gun laws, you end up with ignorant gun laws.

Offline tonygz88

  • Newbie
  • *
  • Posts: 1
Re: New TriStar/Canik Products Coming
« Reply #25 on: May 17, 2017, 10:53:01 PM »
Do any of the existing spring upgrades fit the Tristar models? You have a whole kit listed on the website in the Tristar section; but when I inquired about it I was told it doesn't work.

Offline The77boudreau

  • Newbie
  • *
  • Posts: 32
Re: New TriStar/Canik Products Coming
« Reply #26 on: May 18, 2017, 01:05:12 PM »
 Hammer springs, trigger return springs, recoil Springs and the firing pin block spring all work for sure. A lot of the CZ 75 and SP01 parts are direct fit or pretty close unless you are talking sears, hammers and barrels.
 I have had good luck with my P120 with CGW parts for everything to fix me up for USPSA.
  What exactly are you looking for and for which Tristar?
« Last Edit: May 18, 2017, 01:30:44 PM by The77boudreau »

Offline Stopsign32v

  • Sr. Member
  • ****
  • Posts: 311
Re: New TriStar/Canik Products Coming
« Reply #27 on: May 18, 2017, 10:31:38 PM »
I'll just stick to CZs

Offline Gwelo

  • Newbie
  • *
  • Posts: 16
Re: New TriStar/Canik Products Coming
« Reply #28 on: May 19, 2017, 10:47:43 AM »
Any plans for the Canik TP series pistols?  Some undiscovered gems here waiting for aftermarket support.

Offline CZATC

  • Newbie
  • *
  • Posts: 34
Re: New TriStar/Canik Products Coming
« Reply #29 on: May 19, 2017, 07:06:38 PM »
Do any of the existing spring upgrades fit the Tristar models? You have a whole kit listed on the website in the Tristar section; but when I inquired about it I was told it doesn't work.
SPGK1 3 piece spring kit  blue 13# works beautifully in my c100 and I also put a heavier recoil spring from CZ ordered through midway (20 lb because I saw a lot of guys say that the CZ compacts were under sprung and the canik wound wire looked rough at the ends were clipped and was gouging the cerakote in the recoil guide rod hole) only issue was the slide outran an SP01 18 round mag that is 5 years old and has been kept loaded for probably 2 or 3 of those. New mag spring and 100%. I'm sure schmeky's reduced spring would work well for target loads.

Sent from my Lenovo TAB 2 A10-70F using Tapatalk

CZ 75 SP01-bone stock....CGW bushing and 85 trigger in parts box waiting
TriStar C100 Tungsten Cerakote-CGW kit upon reintroduction :)