Author Topic: CZC smoothed hammer strut  (Read 1453 times)

0 Members and 1 Guest are viewing this topic.

Offline Tok36

  • Hero Member
  • *****
  • Posts: 3471
Re: CZC smoothed hammer strut
« Reply #15 on: March 29, 2017, 09:16:05 AM »
Look at this!  Smoooooooth 8)

That looks good, thank you for the pic.
Will work for CZ pics! (including but not limited to all CZ clones)

Offline SlvrDragon50

  • Hero Member
  • *****
  • Posts: 1142
Re: CZC smoothed hammer strut
« Reply #16 on: March 29, 2017, 11:18:06 AM »
I polished the hammer strut on my 85C when I was following the guide, but I'm a little hesitant to try and smooth it out completely. Are you guys just using a few passes with a file? Or sandpaper?

Offline Tok36

  • Hero Member
  • *****
  • Posts: 3471
Re: CZC smoothed hammer strut
« Reply #17 on: March 29, 2017, 12:07:25 PM »
I used a Dremel with a sanding wheel to change the shape. Then finished it with 400,800,1500 grit sand paper.
Will work for CZ pics! (including but not limited to all CZ clones)

Offline B_RAD

  • Newbie
  • *
  • Posts: 39
Re: CZC smoothed hammer strut
« Reply #18 on: March 29, 2017, 01:08:37 PM »
I'd call up CZC and ask if they'll sell one that they've don't.

Offline jameslovesjammie

  • Hero Member
  • *****
  • Posts: 4315
  • The Last Best Place
Re: CZC smoothed hammer strut
« Reply #19 on: March 29, 2017, 01:42:32 PM »
Tok,

Has there been a noticeable difference in the trigger pull between the rounded strut and stock?  Anything measurable or just smoother?

Offline Tok36

  • Hero Member
  • *****
  • Posts: 3471
Re: CZC smoothed hammer strut
« Reply #20 on: March 29, 2017, 02:30:25 PM »
Tok,

Has there been a noticeable difference in the trigger pull between the rounded strut and stock?  Anything measurable or just smoother?

It smoothed out the DA considerably. The smoothness can make the DA pull feel a bit lighter but i do not believe that it reduced the DA pull weight measurably in my case. If anything a few ounces. It is tough to consistently measure that little difference in the DA.
Will work for CZ pics! (including but not limited to all CZ clones)

Offline B_RAD

  • Newbie
  • *
  • Posts: 39
Re: CZC smoothed hammer strut
« Reply #21 on: March 29, 2017, 04:13:54 PM »
I agree. It makes the pull smoother. Doubt it lowers the pull weight. For me, I don't care if it's 6.5# as long as it's smooth.

Offline jsedacca

  • Newbie
  • *
  • Posts: 21
Re: CZC smoothed hammer strut
« Reply #22 on: March 31, 2017, 02:46:34 PM »
smoothing in this specific area definitely smooths things as out as the hammer spring is compressed. Easy upgrade with a bit of time and some polish/dremel.

Offline RaCzech

  • Newbie
  • *
  • Posts: 29
Re: CZC smoothed hammer strut
« Reply #23 on: June 06, 2017, 11:02:38 AM »
Is there an noticeable trigger pull on DA?


Sent from my iPhone using Tapatalk

Offline asimonp79

  • Newbie
  • *
  • Posts: 30
Re: CZC smoothed hammer strut
« Reply #24 on: July 17, 2017, 12:54:58 AM »
Thanks for the pictures- yeah rounding the main spring strut will decrease/polish the  surface scrubbing against the main spring.
That  suppose to help with DA

 

anything