Author Topic: CGW SAO flat faced trigger  (Read 474 times)

0 Members and 1 Guest are viewing this topic.

Offline fastlane604

  • Full Member
  • ***
  • Posts: 150
CGW SAO flat faced trigger
« on: April 02, 2017, 03:43:13 PM »
Can someone tell me the width of the CGW flat faced trigger?  The website listing shows its dimensions at 3x2x.5, which seems doubtful in any measuring system that I can think of.  My CZC flat faced trigger measures 5/16 inch (.3125) across the trigger face. I am thinking of converting another gun to SA and buy periodically from CGW.  I know I can call David tomorrow and ask, but if someone here knows it will keep him from leaving the bench and slowing up one of your projects. :)

Offline vtr107

  • Newbie
  • *
  • Posts: 8
Re: CGW SAO flat faced trigger
« Reply #1 on: April 02, 2017, 03:58:56 PM »
My 6SAO measures .312 (5/16") replacing the stock 75B SA trigger which also measures the same. I don't think it can be any wider otherwise it wouldn't through the frame.

Offline fastlane604

  • Full Member
  • ***
  • Posts: 150
Re: CGW SAO flat faced trigger
« Reply #2 on: April 02, 2017, 09:11:53 PM »
My 6SAO measures .312 (5/16") replacing the stock 75B SA trigger which also measures the same. I don't think it can be any wider otherwise it wouldn't through the frame.

Thank you.

Offline schmeky

  • Moderator
  • Hero Member
  • *****
  • Posts: 2459
Re: CGW SAO flat faced trigger
« Reply #3 on: April 02, 2017, 09:47:05 PM »
.312" is correct.  The stock trigger is typically .313 - 314".  We prefer the trigger just drop in with no fitting, so we make it .001 - 002" undersized on the width.

Offline fastlane604

  • Full Member
  • ***
  • Posts: 150
Re: CGW SAO flat faced trigger
« Reply #4 on: April 02, 2017, 10:07:25 PM »
Thanks, David.

Offline h8louzn

  • Newbie
  • *
  • Posts: 28
Re: CGW SAO flat faced trigger
« Reply #5 on: April 07, 2017, 10:50:41 PM »
David Will it fit in my P-120? Thanks

Offline schmeky

  • Moderator
  • Hero Member
  • *****
  • Posts: 2459
Re: CGW SAO flat faced trigger
« Reply #6 on: April 08, 2017, 09:56:48 AM »
h8louzn,

Not w/o modification.  The Canik trigger pin is 2.5 mm in diameter, the CZ is 2 mm and our 6SAO is drilled for the 2 mm.

We will be offering our 6SAO in the next month or so modified to fit the Canik, obviously with a new part number.