Author Topic: Swapped out the springs today!  (Read 1004 times)

0 Members and 1 Guest are viewing this topic.

Offline Fotis

  • Newbie
  • *
  • Posts: 3
Swapped out the springs today!
« on: April 02, 2017, 03:55:10 PM »
Hammer, firing pin and hammer block springs.




https://cajungunworks.com/product/spgk1-3-piece-spring-kit-2/

Offline Fotis

  • Newbie
  • *
  • Posts: 3
Re: Swapped out the springs today!
« Reply #1 on: April 02, 2017, 03:55:54 PM »


Waiting for the adjustable rear sight and   Sprinco Recoil Management Guide Rod System






« Last Edit: April 02, 2017, 04:00:00 PM by Fotis »

Offline delphidoc

  • Full Member
  • ***
  • Posts: 200
  • Larry
Re: Swapped out the springs today!
« Reply #2 on: April 02, 2017, 08:00:33 PM »
Good looking gun! Welcome from OK.

Offline Grenhop

  • Newbie
  • *
  • Posts: 17
Re: Swapped out the springs today!
« Reply #3 on: April 06, 2017, 02:55:32 AM »
Let us know how the gun shoots after you make all the changes.

Offline Morbid1X

  • Jr. Member
  • **
  • Posts: 60
Re: Swapped out the springs today!
« Reply #4 on: July 12, 2017, 03:26:44 PM »
Any update on that spring

Offline Boriqua

  • Sr. Member
  • ****
  • Posts: 266
    • Boriqua Leather
Re: Swapped out the springs today!
« Reply #5 on: July 14, 2017, 04:12:36 PM »
Did you give the firing pin block a little polish? the one in my P07 was so bad it would kind of creak going up and down in the channel so when I did the springs on that gun one of the things I did was polish up that round bit and it made a huge difference. I dont feel any Creak in my steel CZ so maybe they are just held to a higher standard.

Offline asimonp79

  • Newbie
  • *
  • Posts: 33
Re: Swapped out the springs today!
« Reply #6 on: July 16, 2017, 03:58:41 PM »
I had my springs from Cajun set on CZ TS 40. Teh main spring is a sweet deal- very light triger.
Highly recommended
With sport hammer the trigger pull is 680 grams