Author Topic: Talon Grips for the CZ 75 SP-01 Phantom?  (Read 615 times)

0 Members and 1 Guest are viewing this topic.

Offline Radar55

  • Newbie
  • *
  • Posts: 7
Talon Grips for the CZ 75 SP-01 Phantom?
« on: April 24, 2017, 01:57:44 PM »
Talon does not currently offer a grip for the Phantom model. I was asked by one of their company Representatives to fill out a request form for their design team. 
I did so and informed them of CZ's intent to bring the Phantom back in 2017. I hope they do so. 
I have Talon grips on many of my pistols.  I really like them.
I will post a follow up once I receive their reply.
CZ 75 SP-01 Phantom

Offline viking499

  • Hero Member
  • *****
  • Posts: 3856
Re: Talon Grips for the CZ 75 SP-01 Phantom?
« Reply #1 on: April 25, 2017, 06:54:31 AM »
Sounds good.  Keep us updated.

Offline Radar55

  • Newbie
  • *
  • Posts: 7
Re: Talon Grips for the CZ 75 SP-01 Phantom?
« Reply #2 on: April 29, 2017, 01:15:01 PM »
Well, it's been a few days since I contacted Talon Grips about a product for the CZ Phantom. I have yet to receive a reply from their Design Team and I doubt I will.
So, I have decided to order their 5x7 grip material and design my own. I will make another post wiTH photos if the project turns out useful.
Radar
« Last Edit: May 06, 2017, 06:21:55 AM by Radar55 »
CZ 75 SP-01 Phantom

Offline Radar55

  • Newbie
  • *
  • Posts: 7
Re: Talon Grips for the CZ 75 SP-01 Phantom?
« Reply #3 on: June 18, 2017, 10:48:17 AM »
I was able to make the Talon grips for the Phantom.  They turned out nice.  Here are some photos.  Sorry for the long delay in the update. I had problems getting the images to upload.








CZ 75 SP-01 Phantom

Offline asimonp79

  • Newbie
  • *
  • Posts: 33
Re: Talon Grips for the CZ 75 SP-01 Phantom?
« Reply #4 on: July 16, 2017, 04:18:42 PM »
I use talon grip on my CZ shadow - one of the best rubber grips on the market.
Nicely cut.
The overlap is pretty small if there is any

Offline viking499

  • Hero Member
  • *****
  • Posts: 3856
Re: Talon Grips for the CZ 75 SP-01 Phantom?
« Reply #5 on: July 18, 2017, 12:17:50 PM »
Radar sent me his pattern for the Talons.  I used it to make a set for my Phantom out of the 5x7" Talon material and it works great.  He also told me I could share the pattern here, but I don't want to post it here because the scale will probably be off and make the picture useless.

If interested, shoot me a PM with your email address and I will send you the pattern.

Offline Jigo23

  • Full Member
  • ***
  • Posts: 232
Re: Talon Grips for the CZ 75 SP-01 Phantom?
« Reply #6 on: July 18, 2017, 02:43:07 PM »
Fantastic job on making your own pattern!  That turned out really really nice!
Talon should just buy your design :)  Very kind of you to share and I highly recommend the Talon material. I'm kinda like the lady in the salsa commercial...I put that $hit on everything! :)