Author Topic: CZ 75 SP-01 Phantom sku #91258 When ?  (Read 563 times)

0 Members and 1 Guest are viewing this topic.

Offline cntrydawwwg

  • Hero Member
  • *****
  • Posts: 4138
CZ 75 SP-01 Phantom sku #91258 When ?
« Reply #15 on: May 11, 2017, 09:15:41 PM »
That would be cool.
    Sorry, ran late tonite. I'll try and get the pics and measurements tomorrow.
   Ok, glad I did the measurements 'cause I was WRONG
   My Tactical is too big for my Phantom holster because of the different slide profile. The Phantom has a slimmer slide, so a holster formed to the Phantom will not fit the Tactical easily.
   Just to add....After doing this, I had a case of deja vu. I believe I already made the exact same mistake some months back(I'm sure someone like Tok may dig it up and point it out)
   Ok, measurements.
    SP01 Tactical
Width @ frame approx. 1.01"
    Height- top of slide to
bottom of frame. Approx. 1.53"
Width of slide approx. .93"

      Phantom
Width @ frame approx. 1.13"
     Height- top of slide to
bottom of frame. Approx. 1.55"
Width of slide approx. .79"
 
  Some pics, Phantom on left, Tactical on right.





     Hope these help Struckat, and sorry for the false info earlier. It's been corrected.
« Last Edit: May 11, 2017, 09:22:16 PM by cntrydawwwg »
If guns are outlawed.........
 Only outlaws will have guns.

Offline viking499

  • Hero Member
  • *****
  • Posts: 3663
Re: CZ 75 SP-01 Phantom sku #91258 When ?
« Reply #16 on: May 11, 2017, 09:29:51 PM »
There is also a difference on the front of the frame at the top.  One frame has a square corner and the other has a beveled corner.

I experienced this recently when I was swapping slide on my Phantom​ and SP-01 UG.  One would fit and the other would not without some minor modifications.

Offline cntrydawwwg

  • Hero Member
  • *****
  • Posts: 4138
Re: CZ 75 SP-01 Phantom sku #91258 When ?
« Reply #17 on: May 11, 2017, 10:45:17 PM »
True viking499. I tried it once before but can't remember which was which, and pistols are put up already.
    IIRC, the Tactical slide would fit on the Phantom frame but not the other way around. But of course with my track record lately, I'm probably remembering incorrectly.
If guns are outlawed.........
 Only outlaws will have guns.

Offline Struckat

  • Jr. Member
  • **
  • Posts: 60
Re: CZ 75 SP-01 Phantom sku #91258 When ?
« Reply #18 on: May 12, 2017, 07:25:21 AM »
Thank you but "False" is a little harsh.

Good comparison photos, thank you. I may end up with an 09 to satisfy my full size carry need. But I want a Phantom more as I think it will fit my hand better. We'll see what happens in the next month or two.

Offline viking499

  • Hero Member
  • *****
  • Posts: 3663
Re: CZ 75 SP-01 Phantom sku #91258 When ?
« Reply #19 on: May 12, 2017, 06:22:01 PM »
True viking499. I tried it once before but can't remember which was which, and pistols are put up already.
    IIRC, the Tactical slide would fit on the Phantom frame but not the other way around. But of course with my track record lately, I'm probably remembering incorrectly.

You are correct on the fitting.  But, I made the tactical slide fit the phantom.  The only reason I tried it was to see how the "two-tone" effect would look. ;)

Offline Stopsign32v

  • Full Member
  • ***
  • Posts: 243
Re: CZ 75 SP-01 Phantom sku #91258 When ?
« Reply #20 on: May 12, 2017, 09:00:28 PM »
I NEED a SP01