Author Topic: P10C FDE HAVE THEY MADE IT TO THE STATES YET ?  (Read 815 times)

0 Members and 1 Guest are viewing this topic.

Offline tlyons68

  • Newbie
  • *
  • Posts: 17
P10C FDE HAVE THEY MADE IT TO THE STATES YET ?
« on: May 18, 2017, 01:40:20 PM »
Anyone know if they have made it here yet ?

Offline ragingbulldaily

  • Full Member
  • ***
  • Posts: 210
Re: P10C FDE HAVE THEY MADE IT TO THE STATES YET ?
« Reply #1 on: May 18, 2017, 01:58:18 PM »
Couldn't tell ya, sorry. I know I have had my black version for two weeks now and have not pulled one round yet. The texture was really bad, I mean really bad in my opinion. It's boxed up and getting ready to ship out to the custom shop for a new custom stippling. Can't wait to get it back and spend a few hours at the range. I've heard here and there a few have the fde, but just talk, no proof, so take it as the wind blowing...

Offline Indy_Tim

  • Sr. Member
  • ****
  • Posts: 296
Re: P10C FDE HAVE THEY MADE IT TO THE STATES YET ?
« Reply #2 on: May 18, 2017, 02:26:01 PM »
A friend of mine at a LGS said that they might get a couple FDE P10Cs in, but they are not the standard catalog guns with night sights.  He says that they are the same as the black, but in FDE and will be priced the same as the black ones.  Sounds like CZ might be having issues sourcing the night sights and are sending over a batch of FDEs that have standard sights to help fill the demand.

Offline ragingbulldaily

  • Full Member
  • ***
  • Posts: 210
Re: P10C FDE HAVE THEY MADE IT TO THE STATES YET ?
« Reply #3 on: May 18, 2017, 06:24:40 PM »
Just got done talking to Blackhawk about a serpa for the p10, it's a no go. I personally like the serpa, now I'm going to have to find something for the p10. I know everyone's rig is what they like but I really like a locking holster. Anyone have anything in a good kydex retention for the p10? Wouldn't mind if it was a light holster one bit.

Offline tlyons68

  • Newbie
  • *
  • Posts: 17
Re: P10C FDE HAVE THEY MADE IT TO THE STATES YET ?
« Reply #4 on: May 18, 2017, 06:39:58 PM »
i got an email from cz said they have arrived and will be on shelves soon !!hopefully i will get my pre ordered and paid for  p10c this time around

Offline whrussell21

  • Full Member
  • ***
  • Posts: 125
Re: P10C FDE HAVE THEY MADE IT TO THE STATES YET ?
« Reply #5 on: May 18, 2017, 06:55:53 PM »
Just got done talking to Blackhawk about a serpa for the p10, it's a no go. I personally like the serpa, now I'm going to have to find something for the p10. I know everyone's rig is what they like but I really like a locking holster. Anyone have anything in a good kydex retention for the p10? Wouldn't mind if it was a light holster one bit.

The Alex and Ryan design or now ANR design that I sent you previously have a retention option in the custom kydex maker you can select.

Offline ragingbulldaily

  • Full Member
  • ***
  • Posts: 210
Re: P10C FDE HAVE THEY MADE IT TO THE STATES YET ?
« Reply #6 on: May 18, 2017, 07:05:33 PM »
Thank you, again, I was hoping I could just do the serpa, but‚Äčno now I know that's not going to happen. By chance do you have either, and what's your opinion?

Offline whrussell21

  • Full Member
  • ***
  • Posts: 125
Re: P10C FDE HAVE THEY MADE IT TO THE STATES YET ?
« Reply #7 on: May 18, 2017, 07:29:45 PM »
I have two of the ANR with rentention screws. One for my Glock 19 and one for my Sphinx SDP. I also ordered one for my CGW P-01 which should arrive prior to the P-01 getting to me. I like the ATCS AU and Carbon Fiber Pattern.

Btw who did you decide to go with for stippling?

Offline ragingbulldaily

  • Full Member
  • ***
  • Posts: 210
Re: P10C FDE HAVE THEY MADE IT TO THE STATES YET ?
« Reply #8 on: May 18, 2017, 07:41:54 PM »
Only thing I added was light and lifetime

Offline ragingbulldaily

  • Full Member
  • ***
  • Posts: 210
Re: P10C FDE HAVE THEY MADE IT TO THE STATES YET ?
« Reply #9 on: May 18, 2017, 07:43:57 PM »
I know you pay for quality, guess I just need to set a holster fund aside while it's at the shop getting a custom stipple job put on. That's only running 185.00

Offline ragingbulldaily

  • Full Member
  • ***
  • Posts: 210
Re: P10C FDE HAVE THEY MADE IT TO THE STATES YET ?
« Reply #10 on: May 18, 2017, 07:45:41 PM »
I think I'll make one out of duct tape while I'm saving.

Offline whrussell21

  • Full Member
  • ***
  • Posts: 125
Re: P10C FDE HAVE THEY MADE IT TO THE STATES YET ?
« Reply #11 on: May 18, 2017, 07:47:30 PM »
I don't carry a light so mine usually average around $72-$85 which seems to be fairly average with g-code and others.

VZ grips has a shopping code good for 15% off since they partnered with ANR. VZANR15 is the code I believe.

Offline MortimerRex

  • Newbie
  • *
  • Posts: 2
Re: P10C FDE HAVE THEY MADE IT TO THE STATES YET ?
« Reply #12 on: May 18, 2017, 08:28:08 PM »
10 FDEs at deguns.net now.

Offline ragingbulldaily

  • Full Member
  • ***
  • Posts: 210
Re: P10C FDE HAVE THEY MADE IT TO THE STATES YET ?
« Reply #13 on: May 18, 2017, 08:46:47 PM »
Deguns has 10 in stock RUN!!!!!!!!!

Offline SlvrDragon50

  • Hero Member
  • *****
  • Posts: 1067
Re: P10C FDE HAVE THEY MADE IT TO THE STATES YET ?
« Reply #14 on: May 18, 2017, 09:02:09 PM »
If only I were back in FL to pick one up. Oh well, probably better that I don't since I can't even carry it here in IL.