Author Topic: P10 disasembly issue?  (Read 899 times)

0 Members and 1 Guest are viewing this topic.

Offline vern56

  • Newbie
  • *
  • Posts: 15
P10 disasembly issue?
« on: June 30, 2017, 09:31:26 PM »
Took my P10 down when I first got it to clean and lube. Followed directions and it came apart easy enough.
Fired about 150 rounds through it but now I can't get the slide off. Goes just past the mag well but then is hanging up on something. Don't want to force it. Tried lifting, pushing down, wiggling.

Any thoughts?

Offline Mjolnir

  • Jr. Member
  • **
  • Posts: 88
Re: P10 disasembly issue?
« Reply #1 on: June 30, 2017, 09:32:46 PM »
Have you pressed the trigger before going thru the disassembly procedures - like one would do with a Glock?


Sent from my iPhone using Tapatalk

Offline DOC 1500

  • Hero Member
  • *****
  • Posts: 1078
Re: P10 disasembly issue?
« Reply #2 on: June 30, 2017, 10:27:29 PM »
Have you pressed the trigger before going thru the disassembly procedures - like one would do with a Glock?


Sent from my iPhone using Tapatalk
^^^^^ that's what I was thinking
JOHN 3:16
2 COR.5:17
A Lie is a Lie even if everybody believes it ,
The Truth is the Truth even if nobody believes it !!!

Offline JConnor93

  • Jr. Member
  • **
  • Posts: 50
Re: P10 disasembly issue?
« Reply #3 on: June 30, 2017, 11:22:17 PM »
Took my P10 down when I first got it to clean and lube. Followed directions and it came apart easy enough.
Fired about 150 rounds through it but now I can't get the slide off. Goes just past the mag well but then is hanging up on something. Don't want to force it. Tried lifting, pushing down, wiggling.

Any thoughts?

When I first took mine apart, I had to have the trigger pressed before I slid the slide back and hit the take down lever.

Offline vern56

  • Newbie
  • *
  • Posts: 15
Re: P10 disasembly issue?
« Reply #4 on: June 30, 2017, 11:31:13 PM »
Yes, ala glock.

Online Joe L

  • Hero Member
  • *****
  • Posts: 4908
Re: P10 disasembly issue?
« Reply #5 on: July 01, 2017, 07:11:28 AM »
I had that happen when I left an empty magazine in the frame.   Just a thought from someone that should have known better.

Joe
CZ-75B 9mm and Kadet, 97B"E", two P-09's, P-07, P-10C

Offline vern56

  • Newbie
  • *
  • Posts: 15
Re: P10 disasembly issue?
« Reply #6 on: July 03, 2017, 09:38:16 PM »
Contacted CZ. Very quick response. They surmise that one of the slide lock lever spring legs came out from underneath the block. Very promptly sent a return label and it will be on its way on Wednesday.

Online flattusmaximus78

  • Sr. Member
  • ****
  • Posts: 300
Re: P10 disasembly issue?
« Reply #7 on: July 04, 2017, 08:17:39 AM »
I was putting the slide back on ones and hit something and reset the trigger and didn't notice, locked that thing up. I was impressed with myself.

Offline Chasam

  • Newbie
  • *
  • Posts: 13
Re: P10 disasembly issue?
« Reply #8 on: July 07, 2017, 09:22:23 AM »
Just had the same thing happen to me,called CZ,Cory, was most helpful.Pistol is on it's way to CZ.After looking at the schematic of the pistol and watching the video on the detail stripping of the weapon,I wonder if this is going to be the achellies heal of this model.I'll wait and see.

Offline vern56

  • Newbie
  • *
  • Posts: 15
Re: P10 disasembly issue?
« Reply #9 on: July 07, 2017, 05:43:08 PM »
Hope not.
After just a little shooting, I really want to love this gun. Shot it so much better than the 19.

Offline Chasam

  • Newbie
  • *
  • Posts: 13
Re: P10 disasembly issue?
« Reply #10 on: July 11, 2017, 12:26:25 PM »
Just to update my experience,received an E mail this a.m.stating that the gun will have to be replaced,4 to 6 weeks time frame possibily longer depending upon inventory.

Offline walker2713

  • Newbie
  • *
  • Posts: 21
Re: P10 disasembly issue?
« Reply #11 on: July 11, 2017, 12:33:13 PM »
How do you say Bummer! in Czech? :'(
"Those who deny freedom to others, deserve it not for themselves; and, under a just God, can not long retain it."  A. Lincoln

Offline vern56

  • Newbie
  • *
  • Posts: 15
Re: P10 disasembly issue?
« Reply #12 on: July 11, 2017, 04:34:00 PM »
Same here.
First email said repair was complete, just the slide lever release spring.
Another email about 10 minutes later, replacing the gun, but subject to availability.
Next day email (monday) said it had been shipped and it arrived today.  ?

Offline Chasam

  • Newbie
  • *
  • Posts: 13
Re: P10 disasembly issue?
« Reply #13 on: August 02, 2017, 05:28:47 PM »
Just received my replacement pistol today,looking forward to range time.

Offline Mjolnir

  • Jr. Member
  • **
  • Posts: 88
Re: P10 disasembly issue?
« Reply #14 on: August 02, 2017, 07:36:07 PM »
Okay, so the problem is what, exactly??




Sent from my iPhone using Tapatalk