Author Topic: How can you lighten up a PCR???  (Read 1580 times)

0 Members and 1 Guest are viewing this topic.

Offline jaytothekizzay

  • Newbie
  • *
  • Posts: 17
Re: How can you lighten up a PCR???
« Reply #15 on: August 01, 2017, 03:01:50 PM »
Unload it

Sent from my SM-G935V using Tapatalk


Offline jb1911

  • Newbie
  • *
  • Posts: 38
Re: How can you lighten up a PCR???
« Reply #16 on: August 01, 2017, 03:16:35 PM »
OK.  Old guy solution here.  Simple.  Use grease on the rails not oil!  Had an old armorer share this secret with me.  Worked on every gun I have had. Just wipe off then excess and work the slide a few times.  It gets real slippy and easier to rack.  My lovely is on the small side too. She can run a 1911 like a Gunny Sergeant with greased rails!

Just tried this and it does make a noticeable difference.

Offline Husky629

  • Newbie
  • *
  • Posts: 14
Re: How can you lighten up a PCR???
« Reply #17 on: August 06, 2017, 08:58:31 PM »
CGW ultralite kit with extended pin.  O0

I did this for both my RAMI BD and SP-01 Tactical.  It brought down the double action pulls noticeably with no change in reliability.

Offline Peacetilence

  • Newbie
  • *
  • Posts: 38
  • CZ 75B, PCR, 97BD and Scorpion EVO3. Fun :)
Re: How can you lighten up a PCR???
« Reply #18 on: August 09, 2017, 12:36:40 PM »

Offline CCW-Ohio

  • Newbie
  • *
  • Posts: 12
Re: How can you lighten up a PCR???
« Reply #19 on: August 10, 2017, 09:59:00 PM »
I'd also vote for polishing/smoothing various internals (e.g - trigger bar, hammer strut). I just put my surplus PCR back together after an adventure in reassembling the sear cage. Finally stripped down to removing the trigger, and went at that puppy with some Mother's. I like  the result on the DA trigger pull. May be just my perception though.

Offline t107

  • Newbie
  • *
  • Posts: 21
Re: How can you lighten up a PCR???
« Reply #20 on: August 14, 2017, 05:07:39 AM »
Keep shooting it will loosen after 1000 rounds.

 

anything