Author Topic: Would anyone be interested in...  (Read 3371 times)

0 Members and 1 Guest are viewing this topic.

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 19821
Re: Would anyone be interested in...
« Reply #15 on: August 09, 2017, 04:05:52 PM »
cntrydawwg, really bad photo editing to give you something nice...



Edit to add - CZ-USA had nothing to do with this bad photo hack, and if someone else owns the name "Banshee", it's not their fault. :)

It would be interesting as a single stack....
« Last Edit: August 09, 2017, 04:39:36 PM by armoredman »

Offline 1SOW

  • Hero Member
  • *****
  • Posts: 15006
  • GO GREEN - Recycle 9MM
Re: Would anyone be interested in...
« Reply #16 on: August 09, 2017, 04:16:06 PM »
 A slightly shorter bbl single stack (thinner grips) model would catch my interest fast for summer IWB carry.

Offline recoilguy

  • Hero Member
  • *****
  • Posts: 2057
Re: Would anyone be interested in...
« Reply #17 on: August 09, 2017, 04:41:32 PM »
cntrydawwg, really bad photo editing to give you something nice...



Edit to add - CZ-USA had nothing to do with this bad photo hack, and if someone else owns the name "Banshee", it's not their fault. :)

It would be interesting as a single stack....

I would buy that gun

RCG
Its easy being a communist in a free country
What's hard is to be free in a communist country

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 19821
Re: Would anyone be interested in...
« Reply #18 on: August 09, 2017, 04:58:50 PM »
1SOW, like this?

« Last Edit: August 09, 2017, 05:11:49 PM by armoredman »

Offline Stuart

  • Hero Member
  • *****
  • Posts: 8592
Re: Would anyone be interested in...
« Reply #19 on: August 09, 2017, 06:01:44 PM »
Still a double stack, but you get the concept.



P10C and Rami B for size comparison.
« Last Edit: August 09, 2017, 06:04:49 PM by Stuart »

Offline Psyop96

  • Hero Member
  • *****
  • Posts: 2684
Re: Would anyone be interested in...
« Reply #20 on: August 09, 2017, 06:04:58 PM »
I absolutely would want one.  I think CZ is seriously neglecting the concealed carry market in the US.  Most people are not willing to carry a P-07 sized pistol concealed.  For those of us that do EDC a P-07 sized pistol there are times when we need something a little smaller.  But what do I know, CZ sells everything faster than they can make it.
Given that the US market alone (even without any organizational sales) now takes half of CZUB's total annual production, you can bet someone's listening to the wail of the Banshee

Offline Stuart

  • Hero Member
  • *****
  • Posts: 8592
Re: Would anyone be interested in...
« Reply #21 on: August 09, 2017, 06:16:59 PM »
FYI..There is a chopped P-07 at the Custom shop but not functional. IIRC, it is as tall and wide as a RAMI but longer.

Link?  That'd be cool. I'd love one that's got a chopped grip w/ 07 slide. That Custom Rami Stuart did with the Rami lower and compact upper was cool.

Here's the Rami with Compact upper the shop built.
« Last Edit: August 09, 2017, 06:18:56 PM by Stuart »

Offline Tok36

  • Hero Member
  • *****
  • Posts: 6243
Re: Would anyone be interested in...
« Reply #22 on: August 09, 2017, 09:02:55 PM »
Banshee******


Make sure you oil it before you drool on it.  ;D
Will work for CZ pics! (including but not limited to all CZ clones)

Offline cntrydawwwg

  • Hero Member
  • *****
  • Posts: 5244
Re: Would anyone be interested in...
« Reply #23 on: August 09, 2017, 09:54:01 PM »
Funny thing--- The Banshee came about when we were wishing for a Phantom compact in another thread. Here's the funny thing, there really is a Banshee Phantom. It's a bike.
http://bansheebikes.com/phantom/
    But I'll still go for the Banshee P series
If guns are outlawed.........
 Only outlaws will have guns.

Offline briang2ad

  • Hero Member
  • *****
  • Posts: 3216
Re: Would anyone be interested in...
« Reply #24 on: August 09, 2017, 10:03:20 PM »
It was the polymer RAMI..:

Offline cntrydawwwg

  • Hero Member
  • *****
  • Posts: 5244
Re: Would anyone be interested in...
« Reply #25 on: August 09, 2017, 10:10:40 PM »
It was the polymer RAMI..:
  You take all the fun out of it.
If guns are outlawed.........
 Only outlaws will have guns.

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 19821
Re: Would anyone be interested in...
« Reply #26 on: August 09, 2017, 11:04:35 PM »
The RAMI P was brought up on B as well. Problem is, the RAMI is based on a dead end pistol series, the 40B/Colt Z-40. There is no real exploration on that pistol anymore. In fact, the RAMI P isn't even carried by CZ-USA anymore. So, to move into the 21st century, AND make both the Striker and Hammer sides of the aisle happy, enter the Banshee. Of course, I get listened to at CZ-UB as well as I get listened to by upper Admin at my real job, so it would take more than just my voice. On the other hand, someone else would probably pick a cooler name.
Stuart, that RAMI with CZ-75 Compact slide assembly is pretty neat. My wife loves her RAMI's, but they don't fit me very well at all.
When it all comes down to it, I spent a few minutes "doodling" on Photobucket and had fun. It probably wold need a major internal redesign to function that short, as well.

Offline LonChaney

  • Full Member
  • ***
  • Posts: 105
Re: Would anyone be interested in...
« Reply #27 on: August 09, 2017, 11:48:29 PM »
FYI..There is a chopped P-07 at the Custom shop but not functional. IIRC, it is as tall and wide as a RAMI but longer.

Link?  That'd be cool. I'd love one that's got a chopped grip w/ 07 slide. That Custom Rami Stuart did with the Rami lower and compact upper was cool.

Here's the Rami with Compact upper the shop built.


I'd love to get my hands on that gun to try out.

Offline whitbaby

  • Newbie
  • *
  • Posts: 23
Re: Would anyone be interested in...
« Reply #28 on: August 10, 2017, 01:58:04 PM »
Funny thing--- The Banshee came about when we were wishing for a Phantom compact in another thread. Here's the funny thing, there really is a Banshee Phantom. It's a bike.
http://bansheebikes.com/phantom/
    But I'll still go for the Banshee P series

Back in the '50's there was a Schwinn Phantom and Schwinn Panther. I had the Panther to deliver paper routes.
;->

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 19821
Re: Would anyone be interested in...
« Reply #29 on: August 10, 2017, 07:41:27 PM »
Well, apparently CZ has already done this - they posted this on an unrelated Facebook page. This is a link to an Instagram photo of a P-07 that was chopped down, not quite as far as my concept gun, but down to subcompact size and then apparently beaten half to death. :) I guess the interest wasn't there at the time as this was supposedly back in 2015, even though the comments there were also very positive.

https://www.instagram.com/p/8Q2vvXwszK/?taken-by=czusafirearms

 

anything