Author Topic: Scorpion Trigger Polishing Video ?  (Read 451 times)

0 Members and 1 Guest are viewing this topic.

Offline jim.c

  • Full Member
  • ***
  • Posts: 181
Scorpion Trigger Polishing Video ?
« on: August 14, 2017, 06:51:49 PM »
I've been searching for a video on polishing the Scorpion trigger pack. So far I haven't been able to find anything on the subject. I see lots of information on trigger jobs but nothing specific on what parts need polishing. If anyone has a link to a polishing video I would very much appreciate it.
Thanks, Jim

Offline akuser47

  • Hero Member
  • *****
  • Posts: 825
Re: Scorpion Trigger Polishing Video ?
« Reply #1 on: August 14, 2017, 08:41:40 PM »
I'm in for seeing if there is one. ;D

Offline SouthernScorp

  • Hero Member
  • *****
  • Posts: 771
Re: Scorpion Trigger Polishing Video ?
« Reply #2 on: August 14, 2017, 08:52:01 PM »
I was contemplating making one when I did mine, but I went overboard on the polish job which got me 3.5lbs but nobody wants to watch a 2-3hr video  ;D
CZ Scorpion Evo S1 Pistol:

SLR Synergy Mini comp
SBT-EVO Brace
PMM Safety Levers
Dual HBI Prostock Charging Handles
Gearhead Mag Release
HBI Trigger Spring
HBI Delta Trigger
PMM QD Front & Rear
Magpul MS1 + QDs
Holosun HS515cu on ADM low mount
Vendetta VP-17-A AFG

Offline omg

  • Jr. Member
  • **
  • Posts: 53
Re: Scorpion Trigger Polishing Video ?
« Reply #3 on: August 14, 2017, 10:31:24 PM »
Spend $50 and send it to shooterselement.

Both of mine have the SE treatment and the triggers are butter!

Offline akuser47

  • Hero Member
  • *****
  • Posts: 825
Re: Scorpion Trigger Polishing Video ?
« Reply #4 on: August 14, 2017, 11:53:00 PM »
I did hbi springs and smoothed all mating surfaces lightly. I can always learn more though. Maybe there will be a DIY video someday.

Offline Arachnid

  • Jr. Member
  • **
  • Posts: 72
Re: Scorpion Trigger Polishing Video ?
« Reply #5 on: August 15, 2017, 12:16:46 AM »
This video goes into great detail on what surfaces are suggested to be polished and why. Doesn't show the acts of polishing but the explanation is complete.


Offline jim.c

  • Full Member
  • ***
  • Posts: 181
Re: Scorpion Trigger Polishing Video ?
« Reply #6 on: August 15, 2017, 12:29:06 AM »
This video goes into great detail on what surfaces are suggested to be polished and why. Doesn't show the acts of polishing but the explanation is complete.



I agree. I finally found the same video and I was about to post the same link.  It's pretty good but I wish it had more detail on what was used to get the job done and what the improvements were after polishing.

Offline yrs

  • Newbie
  • *
  • Posts: 34
Re: Scorpion Trigger Polishing Video ?
« Reply #7 on: August 22, 2017, 03:49:55 PM »
Good video. Learned a lot from it, gave me confidence to start trying doing this myself.

Offline jim.c

  • Full Member
  • ***
  • Posts: 181
Re: Scorpion Trigger Polishing Video ?
« Reply #8 on: August 22, 2017, 08:53:36 PM »
Good video. Learned a lot from it, gave me confidence to start trying doing this myself.

Also look at these videos from HBI. They are very helpful as well.




Offline yrs

  • Newbie
  • *
  • Posts: 34
Re: Scorpion Trigger Polishing Video ?
« Reply #9 on: August 22, 2017, 09:16:08 PM »
Good video. Learned a lot from it, gave me confidence to start trying doing this myself.

Also look at these videos from HBI. They are very helpful as well.





Thank you. Will check them out after work.

Offline akuser47

  • Hero Member
  • *****
  • Posts: 825
Re: Scorpion Trigger Polishing Video ?
« Reply #10 on: August 24, 2017, 04:01:03 PM »
Nice were building a database. ;D

Offline Thrillbilly

  • Jr. Member
  • **
  • Posts: 63
Re: Scorpion Trigger Polishing Video ?
« Reply #11 on: September 10, 2017, 05:47:44 PM »
Nice were building a database. ;D

A comprehensive video thread, pinned, would rock.