Author Topic: Evo suppressor recommendation  (Read 1225 times)

0 Members and 1 Guest are viewing this topic.

Offline Wink57

  • Newbie
  • *
  • Posts: 12
Evo suppressor recommendation
« on: August 22, 2017, 09:46:36 AM »
Have both post and carbine and will be getting barrels for my po7 and spo1. I am liking thompsonMachine.net products. What does everyone else use?

Offline st381183

  • Full Member
  • ***
  • Posts: 113
Re: Evo suppressor recommendation
« Reply #1 on: August 22, 2017, 10:19:40 AM »
Rugged Obsidian 45 by Rugged or Octane 45 HD by Silencerco. Use a 3 lug mount on your PCC. Both are insanely quiet, both give you flexibility to shoot 9mm thru 45, both use the same piston so your pistons from one manufacturer will work with the other, and both have ironclad guarantees with easy to find accessories.  I shoot both on my EVO SBR and they are both quiet as all get out, like movie quiet.  I give the Obsidian the edge due to being insanely quiet in the short configuration as well.   

Both the Obsidian and Octane work very well on all my pistols and I've never had a problem. The Obsidian also has a 9mm end cap that can be used to knock a decibel or two off.  The 9mm endcap is not necessary but is nice to have for the short configuration so you can leave an endcap on the removable module.


Offline hyrysc

  • Jr. Member
  • **
  • Posts: 69
Re: Evo suppressor recommendation
« Reply #2 on: August 22, 2017, 01:19:34 PM »
I am partial to my TiRant 9.  Crazy quiet with 147 or heavier.  Super light.

Offline Spearjunkie

  • Full Member
  • ***
  • Posts: 165
Re: Evo suppressor recommendation
« Reply #3 on: August 23, 2017, 12:06:08 AM »
Omega 9K and never look back.

Offline Nicksterr

  • Newbie
  • *
  • Posts: 7
Re: Evo suppressor recommendation
« Reply #4 on: August 25, 2017, 01:18:18 AM »
Tirant 9. Super lightweight, which mates with the cz scorpion's intended application well. You can do direct thread with fixed barrel spacer OR use AAC's 3-lug mount.

I can't recommend a short can - at least don't get one that has only a short configuration. For one, it takes forever just to get one can, so start with a full or modular can. And second, a short can completely defeats the purpose of suppressing the sound down as much as possible. Using a 6" can vs a 9" can will not affect a man's ability the wield a firearm, I promise - most pistol cans are very light to begin with. Don't fall victim to the "K" craze. Remember these companies are in the business of making $$$.
« Last Edit: August 25, 2017, 01:23:23 AM by Nicksterr »

Offline kyle04

  • Newbie
  • *
  • Posts: 18
Re: Evo suppressor recommendation
« Reply #5 on: August 25, 2017, 03:35:38 PM »
Osprey 45 works pretty well

Doesn't look to bad either

Offline dallasb

  • Newbie
  • *
  • Posts: 10
Re: Evo suppressor recommendation
« Reply #6 on: August 25, 2017, 03:58:07 PM »
I don't have a 9mm can but I do have several others. I used to chase decimals but at this point I look at weight more than anything. If I bought one today it would be the SilencerCo omega 9k which is below 140db at the ear and is very light.

Sent from my SM-G950U using Tapatalk


Offline KevGuillot

  • Jr. Member
  • **
  • Posts: 57
Re: Evo suppressor recommendation
« Reply #7 on: August 26, 2017, 11:06:29 AM »
I have a Silencerco Octane 45k and love it!

Sent from my SM-G930V using Tapatalk


Offline boomer1

  • Jr. Member
  • **
  • Posts: 81
Re: Evo suppressor recommendation
« Reply #8 on: August 26, 2017, 12:30:34 PM »
Octane 45 HD !!

Offline Thrillbilly

  • Jr. Member
  • **
  • Posts: 81
Re: Evo suppressor recommendation
« Reply #9 on: August 27, 2017, 12:20:13 PM »
Osprey 45 works pretty well

Doesn't look to bad either


Man I wish they had a version that is half that length.

Offline kyle04

  • Newbie
  • *
  • Posts: 18
Re: Evo suppressor recommendation
« Reply #10 on: August 28, 2017, 02:09:37 PM »
Osprey 45 works pretty well

Doesn't look to bad either


Man I wish they had a version that is half that length.

They do have a 45k unfortunately its only 1.6" shorter and not half.

Offline Sephael

  • Newbie
  • *
  • Posts: 16
Re: Evo suppressor recommendation
« Reply #11 on: August 30, 2017, 06:04:44 AM »
Osprey 45 works pretty well

Doesn't look to bad either

If it was recessed into the hand guard and had the front slant on the top half to mimic the hand guard it might look good, but with it sticking out and all flat on the front it just doesn't gel with me (despite how much I want it to look good).

Offline Quercusmax

  • Jr. Member
  • **
  • Posts: 58
  • It wasn't my fault
Re: Evo suppressor recommendation
« Reply #12 on: August 30, 2017, 07:07:08 PM »
I have been using a Bowers VERSION 9 on my 2-stamp EVO.  It's big, really big.  But quiet, really quiet.
If it's popular, I'm against it.

Offline TAPnRACK

  • Newbie
  • *
  • Posts: 34
Re: Evo suppressor recommendation
« Reply #13 on: August 30, 2017, 08:00:14 PM »
Do you use a Bowers V-9 with the carbine handguard on your Sorpion?  I'm curious if it fits through the opening.   

Sent from my SM-N920V using Tapatalk


Offline greyling22

  • Newbie
  • *
  • Posts: 40
Re: Evo suppressor recommendation
« Reply #14 on: August 30, 2017, 08:03:02 PM »
The obsidian 45 is the can I'm getting. Unless I find the octane 45 for super cheap. I might also consider the giffin revolution 45.