Author Topic: Evo suppressor recommendation  (Read 1045 times)

0 Members and 1 Guest are viewing this topic.

Offline Quercusmax

  • Newbie
  • *
  • Posts: 44
  • It wasn't my fault
Re: Evo suppressor recommendation
« Reply #15 on: August 30, 2017, 09:20:31 PM »
No, the VERS is too big to fit thru the hand guard.  It's quite fat.
If it's popular, I'm against it.

Offline sboone

  • Newbie
  • *
  • Posts: 23
Re: Evo suppressor recommendation
« Reply #16 on: August 30, 2017, 10:55:13 PM »
I oughta be getting my octane 9 go run soon.  We'll see how it works with 147g hush ammo

Offline Hutehund

  • Jr. Member
  • **
  • Posts: 64
Re: Evo suppressor recommendation
« Reply #17 on: September 04, 2017, 07:15:23 PM »
I'm running the Obsidian 45 too.  It's the only can I've ever used, but I can't imagine being more satisfied.
Take responsibility for your actions.

Offline faltion

  • Newbie
  • *
  • Posts: 19
Re: Evo suppressor recommendation
« Reply #18 on: September 04, 2017, 09:28:08 PM »
I've been using an Octane 45K on mine which I got to have an all-around pistol can, but when I get the chance I want to get an Omega 9K to swap between my Evo and my vz61 Scorpion. The length is great.

Offline Thrillbilly

  • Jr. Member
  • **
  • Posts: 63
Re: Evo suppressor recommendation
« Reply #19 on: September 04, 2017, 10:27:39 PM »
Osprey 45 works pretty well

Doesn't look to bad either

If it was recessed into the hand guard and had the front slant on the top half to mimic the hand guard it might look good, but with it sticking out and all flat on the front it just doesn't gel with me (despite how much I want it to look good).

Oh, I bet that would look fantastic.

Offline TITAN308

  • Sr. Member
  • ****
  • Posts: 251
Re: Evo suppressor recommendation
« Reply #20 on: September 07, 2017, 11:16:47 AM »
HBi + Gemtech MK9K


Offline OhHey1

  • Sr. Member
  • ****
  • Posts: 298
  • Oh hey!
Re: Evo suppressor recommendation
« Reply #21 on: September 10, 2017, 01:10:48 AM »
I shoot 9mm and 7.62x39 out of my Bowers Vers 9. Only suppressor on the market that can do that directly, just needs the ST upgrade that isn't publicly advertised. I actually have a 3 lug on my Scorpion and my PWS 7inch 7.62x39 and swap the suppressor between guns in seconds.
-Form 1 filed 11/15, approved 3/16
-HBI AK safety lever
-HBI left side safety delete
-HBI Duckbill magazine release
-HBI Delta extended charging handle
-HBI Theta trigger shoe
-CZC trigger pack
-CZC upgraded disconnector
-CZC trigger job 3#
-CZC Zhukov adapter and stock
-Yetiwurks Switchback

Offline christopher78

  • Newbie
  • *
  • Posts: 15
Re: Evo suppressor recommendation
« Reply #22 on: September 14, 2017, 01:38:34 PM »
While it is still in jail....I am looking forward to getting my Mystic X on my Scorpion.  With the added low profile base....should be a very light package.

Offline Quercusmax

  • Newbie
  • *
  • Posts: 44
  • It wasn't my fault
Re: Evo suppressor recommendation
« Reply #23 on: September 14, 2017, 06:39:08 PM »
I shoot 9mm and 7.62x39 out of my Bowers Vers 9. Only suppressor on the market that can do that directly, just needs the ST upgrade that isn't publicly advertised. I actually have a 3 lug on my Scorpion and my PWS 7inch 7.62x39 and swap the suppressor between guns in seconds.

Hey!   :)

Really glad to hear of another Bowers user.  Thought I was the only one. 

Just wish it was a bit smaller in diameter so it would fit into a shroud of some kind.  But is IS quiet.
If it's popular, I'm against it.

Offline OhHey1

  • Sr. Member
  • ****
  • Posts: 298
  • Oh hey!
Re: Evo suppressor recommendation
« Reply #24 on: September 14, 2017, 07:30:51 PM »
SUPER quiet! I have an Omega 9K in jail right now to solve that craving. But yes, not many Bowers it seems. They're like the silencer secret. Even if you call SilencerShop and ask them for 1 silencer that you can put on your Glock and Ak47 they will say it doesn't exist. But my Bowers does  ;D
-Form 1 filed 11/15, approved 3/16
-HBI AK safety lever
-HBI left side safety delete
-HBI Duckbill magazine release
-HBI Delta extended charging handle
-HBI Theta trigger shoe
-CZC trigger pack
-CZC upgraded disconnector
-CZC trigger job 3#
-CZC Zhukov adapter and stock
-Yetiwurks Switchback

Offline Quercusmax

  • Newbie
  • *
  • Posts: 44
  • It wasn't my fault
Re: Evo suppressor recommendation
« Reply #25 on: September 14, 2017, 08:01:48 PM »
If and when the SHARE act passes (which includes most provisions of the proposed Hearing Protection Act), I might consider another suppressor that is smaller, to fit better.

And hopefully that will free your item from jail if it doesn't escape first.

Unfortunately, the new SHARE act doesn't seem to include refunding the tax stamp money like the HPA did, according to what I have read.  Too bad if true, because I have a bunch of stamps.  But will still be a good thing.
If it's popular, I'm against it.

Offline Thrillbilly

  • Jr. Member
  • **
  • Posts: 63
Re: Evo suppressor recommendation
« Reply #26 on: September 14, 2017, 08:05:44 PM »
I probably wont buy a can unless the HPA/Share act tupe thing passes.  I don't like all of the restrictions.

Offline JeffroJ

  • Newbie
  • *
  • Posts: 9
Re: Evo suppressor recommendation
« Reply #27 on: September 15, 2017, 11:20:24 AM »
What ammo is everyone running that performs the best?  So far I have seen fiocchi 158 gr being the best for quiet and clean?  Anbody compare Fiochi 158 gr to Hush, is Hush any quieter?
Product Designer

Offline Kenneth

  • Hero Member
  • *****
  • Posts: 638
Re: Evo suppressor recommendation
« Reply #28 on: September 15, 2017, 01:15:27 PM »
Try the Lawman 147's if you don't reload. I wouldn't worry about running anything above a 147.

I reload but would run the cheapest 147's I could get if I didn't.


Sent from my iPhone using Tapatalk

Offline Border Dave

  • Full Member
  • ***
  • Posts: 249
Re: Evo suppressor recommendation
« Reply #29 on: September 15, 2017, 05:09:12 PM »
Try the Lawman 147's if you don't reload.

I shoot those rounds through my Gemtech Multimount and it's really quiet.