Author Topic: So, is the CZ Custom "Low Mount" rear dovetail cut the same as Novak and Heinie?  (Read 669 times)

0 Members and 1 Guest are viewing this topic.

Offline MeatAxe

  • Sr. Member
  • ****
  • Posts: 468
If so, why not just call it a Novak cut, which is pretty much an industry standard?

https://czcustom.com/cz-parts-all/front-and-rear-sights/czc-comp-low-mount-rear-sight.html

So can you put a Low Mount / Novak rear dovetail on a 2075 RAMI?

That would make my life easier as far as finding suitable night sights for the Rami.
« Last Edit: September 18, 2017, 11:16:46 PM by MeatAxe »

Offline Stuart

  • Hero Member
  • *****
  • Posts: 8402
Industry calls it a lo-mount cut. Novak name is a trademark.
Heinie cut is different from the lo-mount dovetail.

Rami rear is not the same.
The Rami can be milled for a lo-mount cut.

Hope that helps.
stuart@czcustom.com
czcustom.com

Offline MeatAxe

  • Sr. Member
  • ****
  • Posts: 468
Industry calls it a lo-mount cut. Novak name is a trademark.
Heinie cut is different from the lo-mount dovetail.

Rami rear is not the same.
The Rami can be milled for a lo-mount cut.

Hope that helps.


Yes that does help -- a lot! Wish I'd known that a long time ago...

Now that I know your Low Mount cut is the same as a Novak (and can be cut into a Rami) that opens up dozens more possible sights to be used instead of those lousy, detestable Meprolight sights I've got on there now.

Thanks!

Offline Stuart

  • Hero Member
  • *****
  • Posts: 8402
Industry calls it a lo-mount cut. Novak name is a trademark.
Heinie cut is different from the lo-mount dovetail.

Rami rear is not the same.
The Rami can be milled for a lo-mount cut.

Hope that helps.


Yes that does help -- a lot! Wish I'd known that a long time ago...

Now that I know your Low Mount cut is the same as a Novak (and can be cut into a Rami) that opens up dozens more possible sights to be used instead of those lousy, detestable Meprolight sights I've got on there now.

Thanks!

Heinie lo mount cut into a RAMI


stuart@czcustom.com
czcustom.com

Offline Mick-S

  • Full Member
  • ***
  • Posts: 136
Here is my Accu-Shadow. It has a Heinie Ultra Low mount rear. This is in CZ Customs Low mount cut.
https://www.heinie.com/361l-ultra-low-mount-ledge-rear-black

« Last Edit: September 20, 2017, 06:51:35 PM by Mick-S »

Offline MeatAxe

  • Sr. Member
  • ****
  • Posts: 468
Industry calls it a lo-mount cut. Novak name is a trademark.
Heinie cut is different from the lo-mount dovetail.

Rami rear is not the same.
The Rami can be milled for a lo-mount cut.

Hope that helps.




Heinie lo mount cut into a RAMI



Nice!

Have you got any pics of a Rami with adjustable Novak or Kensight rear sights on it?

I believe I've seen it done on your P-01 Protek custom with adjustable Novak sights, but not on a Rami.

Thanks!


« Last Edit: September 21, 2017, 07:27:22 AM by MeatAxe »

Offline voodoochile64

  • Newbie
  • *
  • Posts: 4
Industry calls it a lo-mount cut. Novak name is a trademark.
Heinie cut is different from the lo-mount dovetail.

Rami rear is not the same.
The Rami can be milled for a lo-mount cut.

Hope that helps.


Yes that does help -- a lot! Wish I'd known that a long time ago...

Now that I know your Low Mount cut is the same as a Novak (and can be cut into a Rami) that opens up dozens more possible sights to be used instead of those lousy, detestable Meprolight sights I've got on there now.

Thanks!

Heinie lo mount cut into a RAMI

I'd love to have a set of truglo sights on my rami. Will this work if I get the low cut? Additionally, I had to drift my sights noticeably to the right. Its not horrible, but I wonder why this particular pistol shot almost 5 inches left of center out of the box. This is the first firearm that I've had this issue. The stock sights are really crappy, but it is impossible to find sights that fit. Thanks for any replies.

Sent from my P00I using Tapatalk


Offline voodoochile64

  • Newbie
  • *
  • Posts: 4
Industry calls it a lo-mount cut. Novak name is a trademark.
Heinie cut is different from the lo-mount dovetail.

Rami rear is not the same.
The Rami can be milled for a lo-mount cut.

Hope that helps.




Heinie lo mount cut into a RAMI



Nice!

Have you got any pics of a Rami with adjustable Novak or Kensight rear sights on it?

I believe I've seen it done on your P-01 Protek custom with adjustable Novak sights, but not on a Rami.

Thanks!
Sorry, I thought was was messaging Angus.

Sent from my P00I using Tapatalk


 

anything