Author Topic: Primary Machine does it again  (Read 966 times)

0 Members and 1 Guest are viewing this topic.

Online Edward_Teach

  • Full Member
  • ***
  • Posts: 114
Primary Machine does it again
« on: October 04, 2017, 01:12:48 AM »
Sick new slide cuts for the P-07 P-09.
I've said it before, with the release and hype of the P-10c it's awesome to see a company not forgetting about the 07 and 09.

Two guns who in their short time being out haven't (like many cz guns) gotten a lot of aftermarket interest.

But nope these dudes in just a few months alone have come out with a gnarly, useful, compensator (only one other company had one, I have heard good things about it, but does not look as nice as the stealth comp and is slightly larger) and now they are putting down these sick slide cuts.

They are also doing top notch optic milling for the P-07 and 09s

Sent from my SM-G955U using Tapatalk

Glock Gen 5
When you want 1982 innovation today

Online Kenneth

  • Hero Member
  • *****
  • Posts: 653
Re: Primary Machine does it again
« Reply #1 on: October 04, 2017, 02:57:21 AM »
Wow that does look nice.

I need a Urban Grey suppressor ready with slide cuts, RMR, and a full Cajun kit.


Sent from my iPhone using Tapatalk

Online Edward_Teach

  • Full Member
  • ***
  • Posts: 114
Re: Primary Machine does it again
« Reply #2 on: October 04, 2017, 03:14:04 AM »
Wow that does look nice.

I need a Urban Grey suppressor ready with slide cuts, RMR, and a full Cajun kit.


Sent from my iPhone using Tapatalk

Right, well maybe not the UG since I already have an RMR cut P07. But I need to finish getting my CGW innards, buying the kit piece by piece,

Then plan on both a new holster and switching out my Inforce APP for a surefire x300u and DG switch (hence the new holster)

Once that is all set and done, hopefully getting these slide cuts done up, and also then adding the Stealth Comp. 
Glock Gen 5
When you want 1982 innovation today

Offline Raining_Brass

  • Hero Member
  • *****
  • Posts: 618
Re: Primary Machine does it again
« Reply #3 on: October 04, 2017, 08:14:53 AM »
Thanks Edward! Glad you guys are enjoying it! P-10C is a fine pistol. But the king of polymers is still the P-07/09. And we refuse to skip over it and get on the P-10C hype wagon. ;)
We’ve got a lot more really frickin awesome CZ P-07/09 products coming down the line. One of which is something absolutely no one is offering and we believe it’s a shame.

Offline s0nspark

  • Hero Member
  • *****
  • Posts: 1346
  • Talk is cheap!
Re: Primary Machine does it again
« Reply #4 on: October 04, 2017, 11:40:37 AM »
We’ve got a lot more really frickin awesome CZ P-07/09 products coming down the line. One of which is something absolutely no one is offering and we believe it’s a shame.

Man, you are killing me.

How about some hints or teaser graphics? I’d hate to die of suspense before these things come to market! ;-)
"A man's character is his fate."

Offline Raining_Brass

  • Hero Member
  • *****
  • Posts: 618
Re: Primary Machine does it again
« Reply #5 on: October 04, 2017, 11:47:13 AM »
We’ve got a lot more really frickin awesome CZ P-07/09 products coming down the line. One of which is something absolutely no one is offering and we believe it’s a shame.

Man, you are killing me.

How about some hints or teaser graphics? I’d hate to die of suspense before these things come to market! ;-)
I can't say anything right now. I wasn't supposed to even release the pic of that slide cut yet. But sometimes I can't help myself. ;)

Offline s0nspark

  • Hero Member
  • *****
  • Posts: 1346
  • Talk is cheap!
Re: Primary Machine does it again
« Reply #6 on: October 04, 2017, 11:50:50 AM »
We’ve got a lot more really frickin awesome CZ P-07/09 products coming down the line. One of which is something absolutely no one is offering and we believe it’s a shame.

Man, you are killing me.

How about some hints or teaser graphics? I’d hate to die of suspense before these things come to market! ;-)
I can't say anything right now. I wasn't supposed to even release the pic of that slide cut yet. But sometimes I can't help myself. ;)

Do you happen to talk in your sleep?? Might have to deploy an off the book asset for this... ;-)
"A man's character is his fate."

Offline Raining_Brass

  • Hero Member
  • *****
  • Posts: 618
Re: Primary Machine does it again
« Reply #7 on: October 04, 2017, 11:53:28 AM »
We’ve got a lot more really frickin awesome CZ P-07/09 products coming down the line. One of which is something absolutely no one is offering and we believe it’s a shame.

Man, you are killing me.

How about some hints or teaser graphics? I’d hate to die of suspense before these things come to market! ;-)
I can't say anything right now. I wasn't supposed to even release the pic of that slide cut yet. But sometimes I can't help myself. ;)

Do you happen to talk in your sleep?? Might have to deploy an off the book asset for this... ;-)
I do dream about my job literally every night. So there's actually a good chance you could get some info that way. Lmao

Online Edward_Teach

  • Full Member
  • ***
  • Posts: 114
Re: Primary Machine does it again
« Reply #8 on: October 04, 2017, 12:28:15 PM »
Thanks Edward! Glad you guys are enjoying it! P-10C is a fine pistol. But the king of polymers is still the P-07/09. And we refuse to skip over it and get on the P-10C hype wagon. ;)
We’ve got a lot more really frickin awesome CZ P-07/09 products coming down the line. One of which is something absolutely no one is offering and we believe it’s a shame.

I really can't wait.  I do have one thing i hope to see offered in the future, I'm not going to say, and hey maybe the gun gods have been listening and it is what you guys are working on.

All I know, with some CGW love (cz if that's your flavor as well) and the sweet DnR plus production you guys have been doing I'm hoping the P line will shine even more than just the flavor of the month 10c
(Not bashing, I just can't see it offering anything over a worked over g19, sadly I still love both my g19 and chopped g17)
Glock Gen 5
When you want 1982 innovation today

Offline Raining_Brass

  • Hero Member
  • *****
  • Posts: 618
Re: Primary Machine does it again
« Reply #9 on: October 04, 2017, 12:59:30 PM »
Thanks Edward! Glad you guys are enjoying it! P-10C is a fine pistol. But the king of polymers is still the P-07/09. And we refuse to skip over it and get on the P-10C hype wagon. ;)
We’ve got a lot more really frickin awesome CZ P-07/09 products coming down the line. One of which is something absolutely no one is offering and we believe it’s a shame.

I really can't wait.  I do have one thing i hope to see offered in the future, I'm not going to say, and hey maybe the gun gods have been listening and it is what you guys are working on.

All I know, with some CGW love (cz if that's your flavor as well) and the sweet DnR plus production you guys have been doing I'm hoping the P line will shine even more than just the flavor of the month 10c
(Not bashing, I just can't see it offering anything over a worked over g19, sadly I still love both my g19 and chopped g17)
There's no doubt the P-10C is a nice pistol.
...BUT...it's really just another polymer striker gun. The hype is just over done. lol
P-07/09 was a game changer for polymer framed guns and we want to do all we can for them.

Offline s0nspark

  • Hero Member
  • *****
  • Posts: 1346
  • Talk is cheap!
Re: Primary Machine does it again
« Reply #10 on: October 04, 2017, 02:51:46 PM »
The P-07/P-09 really are uniquely positioned. There are a lot of guns that do some things similar but nothing that covers all the bases.

Great stuff!
"A man's character is his fate."

Offline texasmojo

  • Newbie
  • *
  • Posts: 7
Re: Primary Machine does it again
« Reply #11 on: October 04, 2017, 08:45:19 PM »
I'm looking forward to sending my slide to primary machine for RMR cut and am now considering those slide cuts. I'm very impressed. Does primary machine offer a cover plate for RMR cut out in case you don't want an optic?

Offline Raining_Brass

  • Hero Member
  • *****
  • Posts: 618
Re: Primary Machine does it again
« Reply #12 on: October 04, 2017, 09:13:53 PM »
I'm looking forward to sending my slide to primary machine for RMR cut and am now considering those slide cuts. I'm very impressed. Does primary machine offer a cover plate for RMR cut out in case you don't want an optic?
Not at this time. No one gets an RMR and decides they don’t like it. ;) lol

Offline jetcycles

  • Newbie
  • *
  • Posts: 19
Re: Primary Machine does it again
« Reply #13 on: October 05, 2017, 12:11:28 PM »
Thoroughly satisfied with my Primary Machine massaged P07.



Sent from my SM-G900V using Tapatalk


Offline dave33

  • Jr. Member
  • **
  • Posts: 92
Re: Primary Machine does it again
« Reply #14 on: October 05, 2017, 04:33:15 PM »

I can't say anything right now. I wasn't supposed to even release the pic of that slide cut yet. But sometimes I can't help myself. ;)

Dang, how about a PM hint?  I'm thinking of getting a little exotic with my open class P-09.  Are y'all able to drill popple holes in a CZ barrel?

 

anything