Author Topic: How to pin a CZ stock  (Read 728 times)

0 Members and 1 Guest are viewing this topic.

Offline CZBren805

  • Jr. Member
  • **
  • Posts: 33
How to pin a CZ stock
« on: October 07, 2017, 12:20:20 AM »
Does anybody have any experience with pinning either the fixed or adjustable CZ Bren 805 stocks?  I am looking for suggestions on the best methods to use.

Thanks,

Offline Juno

  • Newbie
  • *
  • Posts: 9
Re: How to pin a CZ stock
« Reply #1 on: October 11, 2017, 08:11:23 PM »
I'm just throwing ideas out, but looking at the adjustable stock you could just drill straight through it and use a small carriage bolt . Or for the fixed stock you could drill 2 holes in the block and stock on the bottom and add a plate with screws into the plastic.

Is this a state requirement?

Offline CZBren805

  • Jr. Member
  • **
  • Posts: 33
Re: How to pin a CZ stock
« Reply #2 on: October 24, 2017, 07:29:59 PM »
Yes, in general to be featureless in CA when the rifle has a removable magazine then the stock cannot fold or extend.

Offline romukom

  • Full Member
  • ***
  • Posts: 282
Re: How to pin a CZ stock
« Reply #3 on: October 25, 2017, 07:12:56 AM »
I don't have one at this moment but waiting for the stars to line up.  However, I do have a scorpion.  See my thread  to give you some ideas.
I hope this helps.
http://www.czfirearms.us/index.php?topic=87835.0

Sent from my SM-T713 using Tapatalk


Offline CZBren805

  • Jr. Member
  • **
  • Posts: 33
Re: How to pin a CZ stock
« Reply #4 on: October 25, 2017, 08:53:07 PM »
Great write up!

Thanks for posting.

Offline romukom

  • Full Member
  • ***
  • Posts: 282
Re: How to pin a CZ stock
« Reply #5 on: October 25, 2017, 11:30:03 PM »
No problem. Glad to help

Sent from my SM-T713 using Tapatalk


Offline CZBren805

  • Jr. Member
  • **
  • Posts: 33
Re: How to pin a CZ stock
« Reply #6 on: January 12, 2018, 12:46:45 AM »
Recently saw a post by Beanz2 on another forum with an interesting solution that does not require drilling.  The approach uses a simple woodruff key which is a metal half circle that can be bought for under a dollar at many hardware stores. 

 

anything