Author Topic: CZ 75 .357 SIG  (Read 696 times)

0 Members and 1 Guest are viewing this topic.

Offline Vincent04

  • Newbie
  • *
  • Posts: 14
Re: CZ 75 .357 SIG
« Reply #15 on: October 12, 2017, 04:25:53 PM »
...If anyone has experiences with other 357 SIG pistols I would love to hear about it....

I have and own the .357sig in the following pistols with the triggers:

Sig P226 (DA/SA)
Sig P229 (DAK)
HK P2000 (Heavy LEM)
HK USP357 (DA/SA)
HK P30L (Light LEM)
Beretta Cougar 8357 (DA/SA)

IMHO, the best pistol is the HK P30L because of the easy trigger, balance, lowest felt recoil and ergo grip. Quickest follow-up shots and accuracy is 1-inch groupings 10-12 yds out.

Second best is the Sig P226. Slightly more felt recoil than the P30, and the short reset trigger helps a lot. Rate of follow-up shots and accuracy same as P30.

All others are a distant third because of the trigger systems. Heavy or gritty DA pull, heavy break, long travel between break and reset, etc. The worst is the Beretta, but that is another story.
« Last Edit: October 12, 2017, 04:35:08 PM by Vincent04 »

Offline Evolve13

  • Full Member
  • ***
  • Posts: 188
  • Para Bellum, then be good at 1000 yards.
Re: CZ 75 .357 SIG
« Reply #16 on: October 12, 2017, 04:50:51 PM »
...If anyone has experiences with other 357 SIG pistols I would love to hear about it....

I have and own the .357sig in the following pistols with the triggers:

Sig P226 (DA/SA)
Sig P229 (DAK)
HK P2000 (Heavy LEM)
HK USP357 (DA/SA)
HK P30L (Light LEM)
Beretta Cougar 8357 (DA/SA)

IMHO, the best pistol is the HK P30L because of the easy trigger, balance, lowest felt recoil and ergo grip. Quickest follow-up shots and accuracy is 1-inch groupings 10-12 yds out.

Second best is the Sig P226. Slightly more felt recoil than the P30, and the short reset trigger helps a lot. Rate of follow-up shots and accuracy same as P30.

All others are a distant third because of the trigger systems. Heavy or gritty DA pull, heavy break, long travel between break and reset, etc. The worst is the Beretta, but that is another story.

Good info, I am going to have to look at that HK then.

Thanks
The best defense against evil men, are good men who are skilled at violence.

Offline Hillbilly357

  • Newbie
  • *
  • Posts: 40
Re: CZ 75 .357 SIG
« Reply #17 on: October 12, 2017, 05:07:38 PM »
I have a Sig P320 in .357 Sig
Very impressive handgun.

Offline Bret

  • Hero Member
  • *****
  • Posts: 1450
Re: CZ 75 .357 SIG
« Reply #18 on: October 13, 2017, 02:38:21 PM »
wonder IF a 10 MM is not far behind?
Now that would be my ticket!
as the 357 Sig operates at a higher pressure than the 10 MM then I don't see why not?
It won't happen because the 10mm is too long to fit in the grip frame.  45ACP, 10mm and 9x23Win would have to utilize the CZ97 sized frame.  9mm, 9x21, 30 Luger, 40S&W and 357Sig can all utilize the CZ75 sized frame.  If you want a 10mm, the large frame Witness is the way to go.  I have two and they're great.

Offline FN in MT

  • Jr. Member
  • **
  • Posts: 69
Re: CZ 75 .357 SIG
« Reply #19 on: October 14, 2017, 05:09:39 PM »
   Carried a SIG 229 in .357 sig my last ten years on the cop job. ALWAYS felt well equipped with that gun and cartridge.

   I have a 226 X5 All Around that has a Bar-Sto barrel in .357 sig fitted. THAT is a low recoil (for the cartridge) platform for sure. I can hit my hundred yard, 10" square, steel plate quite regularly with that setup.

Offline Evolve13

  • Full Member
  • ***
  • Posts: 188
  • Para Bellum, then be good at 1000 yards.
Re: CZ 75 .357 SIG
« Reply #20 on: October 16, 2017, 11:41:57 PM »
   Carried a SIG 229 in .357 sig my last ten years on the cop job. ALWAYS felt well equipped with that gun and cartridge.

   I have a 226 X5 All Around that has a Bar-Sto barrel in .357 sig fitted. THAT is a low recoil (for the cartridge) platform for sure. I can hit my hundred yard, 10" square, steel plate quite regularly with that setup.

Was that Sig steel or polymer frame?  I'm assuming steel or aluminum since it was a duty weapon, but want to check please.


Sent from my iPad using Tapatalk
The best defense against evil men, are good men who are skilled at violence.

Offline Bret

  • Hero Member
  • *****
  • Posts: 1450
Re: CZ 75 .357 SIG
« Reply #21 on: October 17, 2017, 10:23:13 AM »
Sig 229's have aluminum frames.

Offline Vincent04

  • Newbie
  • *
  • Posts: 14
Re: CZ 75 .357 SIG
« Reply #22 on: October 18, 2017, 10:44:28 AM »
Sig 229's have aluminum frames.

Yep. The only Sigs with steel frames are most of their 1911s and the Sig P220 in 10mm.

Offline sigken

  • Jr. Member
  • **
  • Posts: 82
Re: CZ 75 .357 SIG
« Reply #23 on: October 18, 2017, 11:46:50 AM »
Nice CZ there!!!!

For 357Sig round I like have a P229 and it shoots really well. It's quite a fun round at the range if you don't mind the ammo cost :)

Offline Ruber

  • Sr. Member
  • ****
  • Posts: 323
Re: CZ 75 .357 SIG
« Reply #24 on: October 18, 2017, 12:37:19 PM »
Have you tried different grips?  I know lots of folks like those, but they give my hand a real workout when shooting full power .40's.

I'm surprised it didn't come with some palmswell bogies on it or something like that.

 

anything