Author Topic: Possible P-10 issue?  (Read 3188 times)

0 Members and 1 Guest are viewing this topic.

Offline AzWizzard

  • Newbie
  • *
  • Posts: 20
Re: Possible P-10 issue?
« Reply #30 on: October 20, 2017, 08:23:32 PM »
My new P10c had this Striker problem happen 5 times out of 200 rounds.  Racking the slide hard multiple times would not correct the problem at all. My P10c is currently sitting at CZ, hopefully getting fixed...  :(

Please let us know what they did to repair it when you get it back if you would. Very curious if it's just put more of the same parts back in or if they put some upgraded design stuff in or what not.  :-\

Will do... I'm interested in the same questions...  ;D

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 17374
Re: Possible P-10 issue?
« Reply #31 on: October 20, 2017, 10:45:38 PM »
That's different, like the striker was hanging up internally? Definitely call CZ-USA about this one.

Offline AzWizzard

  • Newbie
  • *
  • Posts: 20
Re: Possible P-10 issue?
« Reply #32 on: October 31, 2017, 10:26:46 PM »
My new P10c had this Striker problem happen 5 times out of 200 rounds.  Racking the slide hard multiple times would not correct the problem at all. My P10c is currently sitting at CZ, hopefully getting fixed...  :(

Please let us know what they did to repair it when you get it back if you would. Very curious if it's just put more of the same parts back in or if they put some upgraded design stuff in or what not.  :-\

Will do... I'm interested in the same questions...  ;D

Just received an e-mail notification from CZ.  They said that my P10c is on it's way back to me.   ;D

They stated that they replaced the striker assembly and back plate.

I should have it back tomorrow, so we'll see.

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 17374
Re: Possible P-10 issue?
« Reply #33 on: November 01, 2017, 12:23:07 AM »
Outstanding - please post pictures for us?

Offline AzWizzard

  • Newbie
  • *
  • Posts: 20
Re: Possible P-10 issue?
« Reply #34 on: November 01, 2017, 10:22:48 PM »
Outstanding - please post pictures for us?

I'll try to get some pictures up tomorrow. 

So far, just playing with it, on my "old" P10c, I could physically move the striker assembly over and cause the out-of-battery issue that I was experiencing when I shot it.

Since they repaired my P10c, I can no longer physically move the striker over. 

I will try to get out Monday to shoot it and see how it goes.

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 17374
Re: Possible P-10 issue?
« Reply #35 on: November 02, 2017, 12:52:23 AM »
Excellent. I did another 51 rounds with mine today, just so I could say I went to the range before going back to work.  Thanks for keeping us updated!

Offline Str8t-Shooter

  • Newbie
  • *
  • Posts: 11
Re: Possible P-10 issue?
« Reply #36 on: November 02, 2017, 04:13:41 AM »
Outstanding - please post pictures for us?

I'll try to get some pictures up tomorrow. 

So far, just playing with it, on my "old" P10c, I could physically move the striker assembly over and cause the out-of-battery issue that I was experiencing when I shot it.

Since they repaired my P10c, I can no longer physically move the striker over. 

I will try to get out Monday to shoot it and see how it goes.

Is the slide cover still loose back there?  Still slide up and down?   

Offline Joe L

  • Hero Member
  • *****
  • Posts: 4847
Re: Possible P-10 issue?
« Reply #37 on: November 02, 2017, 06:29:36 AM »
I trimmed the bottom and one slot of the plastic cover plate instead of using grease or silicone.    Photo later.
Joe
CZ-75B 9mm and Kadet, 97B"E", two P-09's, P-07, P-10C

Offline AzWizzard

  • Newbie
  • *
  • Posts: 20
Re: Possible P-10 issue?
« Reply #38 on: November 02, 2017, 02:14:48 PM »
Pictures of the "new" striker they put in my P10c.  Sorry I don't have any pictures of the striker before I sent it into CZ.

But like I said, with the replacement Striker, I can no longer move it over by hand to induce the failure like I could with the old striker.


« Last Edit: November 02, 2017, 02:17:29 PM by AzWizzard »

Offline cremaley

  • Jr. Member
  • **
  • Posts: 61
Re: Possible P-10 issue?
« Reply #39 on: November 02, 2017, 05:52:04 PM »
My replacement striker finally showed up today. It took 6 days to get from CZ-USA to Georgia. Will stop by my gunsmith tomorrow to get it installed along with the 3.5 pound HB Industries striker spring. He will also polish the trigger internals to get the trigger pull down to 4 pounds. Mine currently measures 5.25 pounds. Cant wait to get my P-10 back so I can spend more time at the range and less time waiting for replacement parts. I am hoping this is the end of my issues with the P-10.
CZ 10-PC 9mm
Springfield XDE 9mm
Colt Cobra 38 Spl+P

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 17374
Re: Possible P-10 issue?
« Reply #40 on: November 03, 2017, 12:48:30 AM »
Please let us know how well it works now. Nice they got it back to you reasonably quickly!

Offline cremaley

  • Jr. Member
  • **
  • Posts: 61
Re: Possible P-10 issue?
« Reply #41 on: November 03, 2017, 09:37:54 AM »
Please let us know how well it works now. Nice they got it back to you reasonably quickly!


Will do. Thanks.
CZ 10-PC 9mm
Springfield XDE 9mm
Colt Cobra 38 Spl+P

Offline Oldhammerdude

  • Newbie
  • *
  • Posts: 43
Re: Possible P-10 issue?
« Reply #42 on: November 04, 2017, 03:35:10 AM »
Pictures of the "new" striker they put in my P10c.  Sorry I don't have any pictures of the striker before I sent it into CZ.

But like I said, with the replacement Striker, I can no longer move it over by hand to induce the failure like I could with the old striker.


Was the slide cover in rough shape when it went in, The ground off corners?
Tap-Rack-Oh Crap

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 17374
Re: Possible P-10 issue?
« Reply #43 on: November 05, 2017, 01:28:50 AM »
That does look like honest wear, doesn't it.

Offline Oldhammerdude

  • Newbie
  • *
  • Posts: 43
Re: Possible P-10 issue?
« Reply #44 on: November 05, 2017, 03:34:42 AM »
That does look like honest wear, doesn't it.
Yes, It does look like wear. But from what? Something might be rubbing on it from somewhere I Guess.
Hopefully your running and gunning with it.
Tap-Rack-Oh Crap