Author Topic: Possible P-10 issue?  (Read 4581 times)

0 Members and 1 Guest are viewing this topic.

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 17531
Re: Possible P-10 issue?
« Reply #60 on: November 10, 2017, 10:58:40 PM »
That might explain it, yes....

Offline flattusmaximus78

  • Full Member
  • ***
  • Posts: 351
Re: Possible P-10 issue?
« Reply #61 on: November 11, 2017, 04:19:45 PM »
The date on my new one says 2/10/2017. Not sure if it that means it was made in Feb or October. Either way the Striker plate is wayyyyyy tighter. The grooves on the bottom are shaved down. My 4th CZ where the stock tricker is light, crisp, and CLEAN. The plate is also metal, can't remember if my other one is metal as well.
Strike:
https://imgur.com/a/FmBfi

Plate:
https://imgur.com/a/QXOGF

There is a metal tab on the locking block to keep the spring from moving:
https://imgur.com/a/Z4Oro


« Last Edit: November 11, 2017, 04:40:53 PM by flattusmaximus78 »

Offline Psyop96

  • Hero Member
  • *****
  • Posts: 1867
Possible P-10 issue?
« Reply #62 on: November 11, 2017, 06:13:34 PM »
That would be 2 Oct 2017 written in the non-American format (unless you’re military ). That one must have flown first class to the States!
« Last Edit: November 11, 2017, 06:16:02 PM by Psyop96 »

Offline flattusmaximus78

  • Full Member
  • ***
  • Posts: 351
Re: Possible P-10 issue?
« Reply #63 on: November 11, 2017, 06:36:54 PM »
Awesome! Glad I took my chances and got exactly what I wanted. With all the changes, if it runs as good as my older one, I'll be a very happy camper!

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 17531
Re: Possible P-10 issue?
« Reply #64 on: November 11, 2017, 10:01:23 PM »
Excellent! Yes, they all travel first class, better tickets than I can afford!

Offline Oldhammerdude

  • Jr. Member
  • **
  • Posts: 53
Re: Possible P-10 issue?
« Reply #65 on: November 12, 2017, 03:37:19 AM »
Somehow I feel you guys are not seeing the obvious.



30 Second doodle for the CZ engineering team to peek at.
Tap-Rack-Oh Crap

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 800
  • Retired but not forgotten
Re: Possible P-10 issue?
« Reply #66 on: November 12, 2017, 05:32:21 PM »
My CZ P-10 C will be arriving at the factory tomorrow to have the striker block spring replaced along with the slide plate cover. Turn around time was quoted at 4-6 weeks. For those of you who have sent your P-10's back for repair what the the actual turn around time? 
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline Oldhammerdude

  • Jr. Member
  • **
  • Posts: 53
Re: Possible P-10 issue?
« Reply #67 on: November 12, 2017, 06:05:48 PM »
My CZ P-10 C will be arriving at the factory tomorrow to have the striker block spring replaced along with the slide plate cover. Turn around time was quoted at 4-6 weeks. For those of you who have sent your P-10's back for repair what the the actual turn around time?

Don't know yet, 2+ weeks right now. Sorry, not much help I know.
Tap-Rack-Oh Crap

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 800
  • Retired but not forgotten
Re: Possible P-10 issue?
« Reply #68 on: November 12, 2017, 07:28:19 PM »
My CZ P-10 C will be arriving at the factory tomorrow to have the striker block spring replaced along with the slide plate cover. Turn around time was quoted at 4-6 weeks. For those of you who have sent your P-10's back for repair what the the actual turn around time?

Don't know yet, 2+ weeks right now. Sorry, not much help I know.

Thanks anyway.
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 800
  • Retired but not forgotten
Re: Possible P-10 issue?
« Reply #69 on: November 13, 2017, 05:08:00 PM »
Received confirmation today that my P-10 has been received by CZ Warranty Service and they will send me weekly updates on the status of my repairs. Hopefully it won't take 4-6 weeks to complete the repair which is nothing more than replacing the striker block spring and slide cover plate.
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline MRblack06

  • Jr. Member
  • **
  • Posts: 28
Re: Possible P-10 issue?
« Reply #70 on: November 14, 2017, 10:28:23 PM »
It will certainly take at least 4 weeks. I sent mine in with some issues 4 weeks ago tomorrow (15 Nov). As far as I know from the email I received last week, they haven't even looked at it yet  :-\

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 800
  • Retired but not forgotten
Re: Possible P-10 issue?
« Reply #71 on: November 15, 2017, 09:47:33 AM »
It will certainly take at least 4 weeks. I sent mine in with some issues 4 weeks ago tomorrow (15 Nov). As far as I know from the email I received last week, they haven't even looked at it yet  :-\

Was hoping the turnaround time was better than 4-6 weeks but I guess not.  On the positive side I saw on the Colt Forum where they are quoting 4-5 months warranty repair on the new Colt Cobra. Yikes! I own one. Hope nothing goes wrong with it.
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline flattusmaximus78

  • Full Member
  • ***
  • Posts: 351
Re: Possible P-10 issue?
« Reply #72 on: November 15, 2017, 12:06:46 PM »
Put roughly 175-200 rounds through my new P10 today. No hiccups. Federal aluminum, Monarch Brass, and Freedom reloads. Took me a while to figure out the gun, had to go back to my P09 for a bit, but wrapped up my range time with the P10 and it is a killer shooter.

Trigger on this one is heavier than the other during live fire, but much cleaner.

The range actually had a P10, I was shocked. Asking $519, which isn't bad, got both of mine for $499 plus plus. Their P10 had an insanely light trigger.

All and all I love it, but I will say the P09 reigns supreme for now. I guess we will have to wait for a P10F to compare.

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 800
  • Retired but not forgotten
Re: Possible P-10 issue?
« Reply #73 on: November 15, 2017, 03:08:20 PM »
New replacement parts for the P-10 are now available in Kansas City for warranty repairs including strikers.
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline StuckonGlocks21

  • Jr. Member
  • **
  • Posts: 49
Re: Possible P-10 issue?
« Reply #74 on: November 15, 2017, 03:10:51 PM »
New replacement parts for the P-10 are now available in Kansas City for warranty repairs including strikers.
Now, if they will start offering them for sale so we can have spares...


Sent from my iPhone using Tapatalk

 

anything