Author Topic: brass for 7.62x39  (Read 164 times)

0 Members and 1 Guest are viewing this topic.

Offline 86304

  • Newbie
  • *
  • Posts: 22
brass for 7.62x39
« on: November 13, 2017, 10:04:35 PM »
hi guys,
started reloading recently (.223 and 9mm).
would these be good brass for reloading for my CZ527 in 7.62x39?

http://www.sgammo.com/product/selli...case-boxer-primed-sellier-bellot-ammo-sb76239


thanks, Bob

Offline Augie.Cooper

  • Newbie
  • *
  • Posts: 35
Re: brass for 7.62x39
« Reply #1 on: November 13, 2017, 10:26:48 PM »
They will work but I like the PPU better because the primer pockets are not as tight and easier to primer.

Sent from my XT1565 using Tapatalk


Offline CPTKILLER

  • Sr. Member
  • ****
  • Posts: 290
Re: brass for 7.62x39
« Reply #2 on: November 14, 2017, 10:56:17 AM »
Good news.

Offline 86304

  • Newbie
  • *
  • Posts: 22
Re: brass for 7.62x39
« Reply #3 on: November 14, 2017, 01:07:38 PM »
thanks for the replies.
perhaps a couple hundred of the PPU might be a better idea.

any pet loads?

bob

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 17393
Re: brass for 7.62x39
« Reply #4 on: November 14, 2017, 08:38:21 PM »
Fiocchi, VERY tight pockets. Pet loads for what bullets - I shoot a lot of home cast powder coated loads, if you cast bullets? I will say my favorite powder bar none for 7.62x39mm is AA #1680, works better than anything else I've tried.

Offline Augie.Cooper

  • Newbie
  • *
  • Posts: 35
Re: brass for 7.62x39
« Reply #5 on: November 19, 2017, 05:04:40 PM »
Fiocchi, VERY tight pockets. Pet loads for what bullets - I shoot a lot of home cast powder coated loads, if you cast bullets? I will say my favorite powder bar none for 7.62x39mm is AA #1680, works better than anything else I've tried.
Have you tried shooter's world blackout, it is made by lovex and is supposed to be very similar to AA 1680 in burn rate but is cheaper. I love it for my 7.62*39 loads.

Sent from my XT1565 using Tapatalk


Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 17393
Re: brass for 7.62x39
« Reply #6 on: November 19, 2017, 08:39:07 PM »
Nope, never heard of it, actually. I buy 1680 in bulk so it lasts...i'll run out sometime late next year, maybe.

 

anything