Author Topic: CZ-75B SA  (Read 301 times)

0 Members and 1 Guest are viewing this topic.

Offline shellslinger

  • Newbie
  • *
  • Posts: 4
CZ-75B SA
« on: November 13, 2017, 11:07:45 PM »
Hey guys,

I was able to get my hands on a CZ-75B SA model this past weekend and was able to go to the range today. I brought out my Glock 22 and my new CZ. I was extremely impressed with its accuracy and recoil mitigation. The magazines are so much easier to load then my Glock magazines. I'm not the best pistol shooter so my groups suck. Anyways, I placed the targets out to 25 yards. Both guns have Tru-Glo TFX Night Sights on them. On the left is the Glock 22 and on the right is the first 15 rounds from the CZ.


I am really really impressed with this gun. I had a P-07 before and I just didn't like the gun but tried my luck again with this all steel model. I am in love with this gun.

Are there any mods you guys would recommend for this gun?
Also I'm planning on getting a safariland holster (level 2 or 3) for this, I keep hearing that Beretta holsters work this gun?




« Last Edit: November 13, 2017, 11:12:18 PM by shellslinger »

Offline Morbid1X

  • Full Member
  • ***
  • Posts: 141
Re: CZ-75B SA
« Reply #1 on: November 13, 2017, 11:25:24 PM »
The 75 sa is an excellent pistol. Cgw race hammer and extended firing pin wouldn't hurt. Basically a defensive carry package or a pro package from cgw, will make a good gun amazing.

Offline seaswol

  • Jr. Member
  • **
  • Posts: 99
Re: CZ-75B SA
« Reply #2 on: November 14, 2017, 01:35:23 AM »
Those targets are identical to my now former Glock and my current three CZ's.

Offline M1A4ME

  • Hero Member
  • *****
  • Posts: 2600
  • I've shot the rest, I now own the best - CZ
Re: CZ-75B SA
« Reply #3 on: November 14, 2017, 05:53:17 AM »
I smile when I see targets like that.

My youngest son will take his P07 to the range when we go shooting.  However, he usually shoots a magazine through the P07,lays it down and then shoots his CZ 75 SA for the rest of the range session.  Prior to the P07, he would brag about his Beretta 90-Two.  His first group with the new P07 was better than what he was seeing from the Beretta.  His groups with the CZ 75 SA are so much better than the P07 he says he doesn't really enjoy shooting the P07 since he likes small groups, too.

Lots of aftermarket upgrade parts available for these pistols.  They only get better.
Better to have it and not need it, than to need it and not have it.  So, if you see me walking the dogs with my SIG 556R, its okay.

Offline redlightrich

  • Jr. Member
  • **
  • Posts: 71
Re: CZ-75B SA
« Reply #4 on: November 14, 2017, 08:16:02 AM »
At 25 yards, the target on the right are all hits. If you are a target shooter, some more practice will get you there. For defense, those are all good center mass hits.

CZ makes a good pistol, that works well out of the box. They don't spend time to "refine" them on the assembly line, but they sure do respond to work.

CGW has a host of nice items, and although I buy their parts, I never personally used their service. Many people here say nice things about them.

First decide exactly what you want the gun to do, as what role or roles will it play, then you can decide what work you would like.

The 75 can be a good target pistol, with a little love, but is perfectly suited, out of the box, to be a service or defense arm. The SA uses a similar manual of arms to a 1911, so it can be carried cocked and locked.

I am glad you like your SA. I like DA/SA guns a bit more, but the SA give the nicer frame, with the more pronounced beavertail.

Good purchase. Enjoy!!!

Rich

Offline newageroman

  • Newbie
  • *
  • Posts: 26
Re: CZ-75B SA
« Reply #5 on: November 14, 2017, 02:35:34 PM »
Does your SA have a polymer trigger or is is an aluminum trigger? I was gifted a polymer trigger and while it worked OK, I could feel some flex in it. The aluminum trigger has adjustments for both over travel and take up, so I went with that and like it a lot better.

As has been mentioned, the CGW race hammer is suggested. It will do the most for the trigger.

Offline shellslinger

  • Newbie
  • *
  • Posts: 4
Re: CZ-75B SA
« Reply #6 on: November 14, 2017, 05:07:51 PM »
Does your SA have a polymer trigger or is is an aluminum trigger? I was gifted a polymer trigger and while it worked OK, I could feel some flex in it. The aluminum trigger has adjustments for both over travel and take up, so I went with that and like it a lot better.

As has been mentioned, the CGW race hammer is suggested. It will do the most for the trigger.

I got the aluminum trigger, the trigger feels great.

Definitely going to be looking into a CGW race hammer and possibly extended firing pin.

Just added VZ grips on it today.

« Last Edit: November 14, 2017, 05:32:19 PM by shellslinger »

Offline newageroman

  • Newbie
  • *
  • Posts: 26
Re: CZ-75B SA
« Reply #7 on: November 16, 2017, 10:15:59 AM »
Those grips look good. I just got some LOK thin grips(grey) and I really like them (but I prefer thin grips).
If you havent already, take notice of the downward camming of the hammer when you are pulling the trigger. With the race hammer installed this is minimized substantially and provides very little creep and nice break.