Author Topic: DPM RECOIL REDUCTION SPRINGS..  (Read 522 times)

0 Members and 1 Guest are viewing this topic.

Offline dannyvi

  • Full Member
  • ***
  • Posts: 119
DPM RECOIL REDUCTION SPRINGS..
« on: December 03, 2017, 09:07:43 PM »
Any take on this system? Tried it and any opinions? I might try it on my 97BD.

Offline The Guardian

  • Sr. Member
  • ****
  • Posts: 314
  • Always watching...
Re: DPM RECOIL REDUCTION SPRINGS..
« Reply #1 on: December 03, 2017, 10:54:37 PM »
I'm currently in the process of drinking the Kool-Aid on this product......mine should be arriving any day now, takes a couple weeks to get after ordering.....holiday's kind of slow it down a bit  ???.  Not sure what to expect, though I do have some high hopes!   :)
"I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them." — John Wayne as J.B. Books in "The Shootist" (1976)

Offline dannyvi

  • Full Member
  • ***
  • Posts: 119
Re: DPM RECOIL REDUCTION SPRINGS..
« Reply #2 on: December 04, 2017, 03:29:29 PM »
Hope it works out as advertised! Please post opinion as it is a bit expensive for me to gamble on. Which gun are you using it for?Thanks.

Offline boo2112

  • Newbie
  • *
  • Posts: 39
Re: DPM RECOIL REDUCTION SPRINGS..
« Reply #3 on: December 04, 2017, 03:47:22 PM »
Just remember to keep it well lubed with snake oil.

Offline dannyvi

  • Full Member
  • ***
  • Posts: 119
Re: DPM RECOIL REDUCTION SPRINGS..
« Reply #4 on: December 05, 2017, 01:57:59 AM »
You using one?

Offline The Guardian

  • Sr. Member
  • ****
  • Posts: 314
  • Always watching...
Re: DPM RECOIL REDUCTION SPRINGS..
« Reply #5 on: December 06, 2017, 05:24:13 PM »
I'm currently in the process of drinking the Kool-Aid on this product......mine should be arriving any day now, takes a couple weeks to get after ordering.....holiday's kind of slow it down a bit  ???.  Not sure what to expect, though I do have some high hopes!   :)

Mine has arrived......hoping to get to the range sometime in the next few days.  I'm going to try it in my fully upgraded 75BD (modified to accept a full length guide rod) and my modestly upgraded SP-01 Phantom. Will let everyone know how it works and post some pics of the "system".  So far I can say its seems to be a well made quality part.....  :)
"I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them." — John Wayne as J.B. Books in "The Shootist" (1976)

Offline dannyvi

  • Full Member
  • ***
  • Posts: 119
Re: DPM RECOIL REDUCTION SPRINGS..
« Reply #6 on: December 07, 2017, 01:55:12 AM »
Anxiously waiting,lol!

Offline 05k20z1

  • Newbie
  • *
  • Posts: 37
Re: DPM RECOIL REDUCTION SPRINGS..
« Reply #7 on: December 07, 2017, 04:28:18 AM »
Following...


Sent from my iPhone using Tapatalk

Offline The Guardian

  • Sr. Member
  • ****
  • Posts: 314
  • Always watching...
Re: DPM RECOIL REDUCTION SPRINGS..
« Reply #8 on: December 08, 2017, 04:07:10 PM »
Haven’t made it to the range yet....but, did do some fitting and racking to see how it felt and functioned......pics with comments below each  :)


This is a picture from the package.....thought it gave a pretty good representation of the system




Pictures of the guide and external springs (lightest to stiffest, top to bottom)



Side by side comparison of DPM & factory guide rods




Pics of the system installed in the Phantom



Okay now some info.......this system I got was specific to the SP01 family of CZ’s....and it fits and functions flawlessly in the Phantom.....you can feel the system buffer the further back the slide goes....it’s a very smooth and steady buffering. Stoked to get this to the range....weather has been non cooperative, but soon.

When I tried it in my modified 75BD, which is now a full length guide rod, it didn’t work so well....conclusion, the shroud at the front of the 75BD is machined slightly different hence, no workie  >:( , but that’s totally on me, the literature as well as the website is pretty specific that each system is made for the models specified.....so follow the companies guidelines  ::)

Cost.....84 Euro shipped....w/exchange rate equates to $102 US dollars
« Last Edit: December 08, 2017, 08:08:29 PM by The Guardian »
"I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them." — John Wayne as J.B. Books in "The Shootist" (1976)

Offline 1SOW

  • Hero Member
  • *****
  • Posts: 14438
  • GO GREEN - Recycle 9MM
Re: DPM RECOIL REDUCTION SPRINGS..
« Reply #9 on: December 08, 2017, 08:48:44 PM »
There was a Hi Power  progressive wound recoil spring at Wolff Springs that costs about $10-$12 shipped. Has to be used on your guide rod.  Fits CZ 75s
It may not have the same force progression as  the DPM unit,  but works mostly like the one above.
Long time back I used one for some time,  until I went to a lighter spring.  A shooter friend used a Hi Power with ejection problems.  and I gave it to him and it fixed his HP.

ADDED:  I mentioned progressive wound springs a while back and schmecky aka David ( :))said they are planning on offering a progressive wound recoil spring for CZ75 models.
« Last Edit: December 08, 2017, 11:04:48 PM by 1SOW »

Offline HST

  • Jr. Member
  • **
  • Posts: 86
Re: DPM RECOIL REDUCTION SPRINGS..
« Reply #10 on: December 09, 2017, 08:57:32 AM »
I have the Springco recoil system installed in my 85B , it is a similar system as the DPM . I like it a lot , very smooth and differnt feel on recoil.
I have about a 1000 rounds thru this setup with no  problems so far.

Offline The Guardian

  • Sr. Member
  • ****
  • Posts: 314
  • Always watching...
Re: DPM RECOIL REDUCTION SPRINGS..
« Reply #11 on: December 11, 2017, 08:46:22 PM »
I have the Springco recoil system installed in my 85B , it is a similar system as the DPM . I like it a lot , very smooth and differnt feel on recoil.
I have about a 1000 rounds thru this setup with no  problems so far.

What was/is the cost on the Springco ?
"I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them." — John Wayne as J.B. Books in "The Shootist" (1976)

Offline HST

  • Jr. Member
  • **
  • Posts: 86
Re: DPM RECOIL REDUCTION SPRINGS..
« Reply #12 on: December 12, 2017, 08:50:49 AM »
I can't remember off hand, i think it was a little cheaper than the DPM but it wasn't cheap . 

Offline dannyvi

  • Full Member
  • ***
  • Posts: 119
Re: DPM RECOIL REDUCTION SPRINGS..
« Reply #13 on: December 12, 2017, 05:17:25 PM »
Well, just ordered my Christmas present for myself. One for my Rami and another for my 97BD. Hopen it's worth the cost and wait as it is coming from put of the country, I think. Will update but no chance of using before the holidays.

Offline The Guardian

  • Sr. Member
  • ****
  • Posts: 314
  • Always watching...
Re: DPM RECOIL REDUCTION SPRINGS..
« Reply #14 on: December 13, 2017, 07:18:07 PM »
Well, just ordered my Christmas present for myself. One for my Rami and another for my 97BD. Hopen it's worth the cost and wait as it is coming from put of the country, I think. Will update but no chance of using before the holidays.

Can’t even imagine a scenario where this was a questionable decision  ;D
"I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them." — John Wayne as J.B. Books in "The Shootist" (1976)