Author Topic: 527M inconsistent ejection  (Read 484 times)

0 Members and 1 Guest are viewing this topic.

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 17729
527M inconsistent ejection
« on: December 07, 2017, 01:47:41 PM »
If you watched my last video, I had really inconsistent ejection with my beloved 527M/CSR, and it ranged from "pick it out of the extractor claw" to "fly out like normal". My brass IS old, (some have more ejector marks on the rim than letters and numbers), and I hadn't ever really cleaned under the ejector button...didn't really think that was going to be a problem, honestly, but I did clean the snot out of it before I take her out again soon. Anyone had an ejector simply wear out, considering it's nothing more than a wide flat peice of steel that kicks the brass off the extractor claw...

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 17729
Re: 527M inconsistent ejection
« Reply #1 on: December 31, 2017, 12:59:28 AM »
CZ-USA has the 527M/CSR now, so we will see. Not a failure of the rifle, just me wearing it out, I'm sure.

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 1857
Re: 527M inconsistent ejection
« Reply #2 on: December 31, 2017, 07:04:20 AM »
I've never known anybody that wore out any part on a bolt action rifle. I'm impressed!

Offline painter

  • Hero Member
  • *****
  • Posts: 5448
Re: 527M inconsistent ejection
« Reply #3 on: December 31, 2017, 08:11:05 AM »
Couldn't you find someone local to avoid shipping?
I had the right to remain silent...

but not the ability.

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 17729
Re: 527M inconsistent ejection
« Reply #4 on: January 01, 2018, 03:58:31 PM »
Nobody local I would trust with that baby. The gunsmith buddy who worked on it before gotten hitched lately, and nobody sees hide nor hair of him on non work days.
I have worn out a few guns over the years, but this was my first bolt action. On the other hand, I have gotten my moneys worth by far - I have brass that I have loaded so many times that you can't read the headstamp for the ejector marks...which ALSO might be related to the problem. It was built for steel case stuff, after all...I just insist on being me.

Offline painter

  • Hero Member
  • *****
  • Posts: 5448
Re: 527M inconsistent ejection
« Reply #5 on: January 01, 2018, 07:37:15 PM »
Nobody local I would trust with that baby. The gunsmith buddy who worked on it before gotten hitched lately, and nobody sees hide nor hair of him on non work days.
I have worn out a few guns over the years, but this was my first bolt action. On the other hand, I have gotten my moneys worth by far - I have brass that I have loaded so many times that you can't read the headstamp for the ejector marks...which ALSO might be related to the problem. It was built for steel case stuff, after all...I just insist on being me.
After your posts, I looked at the schematic of the 527. I never noticed the 'ejector spring' before. You shoot yours a ton. Hopefully it was just dirty...if you wore it out...

way to go! ;D
I had the right to remain silent...

but not the ability.

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 17729
Re: 527M inconsistent ejection
« Reply #6 on: January 03, 2018, 11:59:42 PM »
I never did either, had to look it up myself! I have put THOUSANDS of rounds through that fine carbine, easily my most-fun-to-shoot rifle ever. In the history of ever, to be precise.  8) I give the rifle no fault on this one - most likely it's me, probably with not knowing what is located there, I didn't clean it out right, and CZs gunsmith will be sending me a pointed email about proper firearms maintenance.  ::) If I actually did manage to wear it out, hey, this thing lasted a long time with digesting a WHOLE lot of factory and hand loaded ammo. I was told that I should use more steel case Russian ammo...yeah, like a hand loader like me is gonna use that stuff.  ;D AKA, "yuck". However, I get the point. I just anxiously await the return of my coyote hammer.

Offline painter

  • Hero Member
  • *****
  • Posts: 5448
Re: 527M inconsistent ejection
« Reply #7 on: January 11, 2018, 06:46:50 AM »
Well...? ;D
I had the right to remain silent...

but not the ability.

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 17729
Re: 527M inconsistent ejection
« Reply #8 on: January 12, 2018, 01:14:22 AM »
We wait. 4-6 weeks is the standard turn around, and I told them I can wait if something else has to get done. So....we wait. :'(

Offline painter

  • Hero Member
  • *****
  • Posts: 5448
Re: 527M inconsistent ejection
« Reply #9 on: January 12, 2018, 12:25:28 PM »
We wait. 4-6 weeks is the standard turn around, and I told them I can wait if something else has to get done. So....we wait. :'(
It seems like it's been that long already. :P

I feel like the kid in the back seat... ;)
I had the right to remain silent...

but not the ability.

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 17729
Re: 527M inconsistent ejection
« Reply #10 on: January 12, 2018, 11:21:29 PM »
Are we there yet...are we there yet...MOM...HE WON'T STOP TOUCHING ME...are we there yet?