Author Topic: CZ50 Extractor?  (Read 309 times)

0 Members and 1 Guest are viewing this topic.

Offline ckaine

  • Newbie
  • *
  • Posts: 1
CZ50 Extractor?
« on: December 23, 2017, 09:41:42 AM »

I am new to the Forum and my CZ(VZ)50. Thank you for allowing me to join. I look forward to leaning!

I have an issue with my recently acquired CZ50. The extractor does not appear to be correct. It functions, i.e. extracts the spent round-BUT-it never rests flush with the slide when the pistol is unloaded, and it also does not push the Loaded Indicator out when loaded. If I push on the rear of the extractor, the Indicator does protrude.

My questions is; how difficult is it to replace the Extractor, and is there any written or video instructions.



Offline rdcinhou

  • Sr. Member
  • ****
  • Posts: 738
  • Coat of Arms for Uherský Brod
Re: CZ50 Extractor?
« Reply #1 on: December 26, 2017, 07:24:49 AM »
I've never had to take my CZ70 apart, but here is an exploded diagram:

HLE has ebooks on some of the older CZs, I've bought one and it is very explanatory.

Here is a link to a video about what is in the CZ70 (just a later version of the CZ50) ebook:

Good luck!

CZ 24, CZ 27, CZ 38, CZ 45, CZ 52, Vzor 70, CZ75BΩ, CZ75D PCR Compact, CZ 75 P07 Duty, CZ75 SP-01 Phantom, CZ Shadow 2 Urban Grey, CZ P09 Duty, P10C, CZ 82, CZ 83, CZ 97BE, CZ 2075D RAMI, CZ 452 American, CZ 550 UCS (Urban Counter Sniper), CZ 805 Bren, DUO & Z

Offline MilfordBauer

  • Jr. Member
  • **
  • Posts: 72
Re: CZ50 Extractor?
« Reply #2 on: March 13, 2018, 10:07:48 PM »
Sounds like the extractor spring is broke.  Apex and buymilsurp used to carry NOS extractor springs,    Got to watch Numrich, they have the spring but it might be used.