« previous next »
Pages: [1] 2 3 ... 5   Go Down

Author Topic: Tool Steel Striker For The P-10  (Read 8426 times)

0 Members and 1 Guest are viewing this topic.

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 798
  • Retired but not forgotten
Tool Steel Striker For The P-10
« on: December 27, 2017, 09:26:53 AM »
Just received great news from Cajun Gun Works. They have designed a tool steel striker for the P-10 that is now in production and should be available in the next few weeks or less. Since the tip of the original stock striker broke off on my P-10 and was replaced by another stock striker I will definitely be ordering one from CGW.
Logged
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline rich63

  • Sr. Member
  • ****
  • Posts: 566
Re: Tool Steel Striker For The P-10
« Reply #1 on: December 27, 2017, 10:11:47 AM »
That is great news. I will definitely be purchasing one. The factory firing pin is a very weak at the tip. I had one break off at the 4,000 round mark. Called CZ-USA and they sent me a used one. Put an additional 300 rounds through the gun and the tip of the used one I received from CZ-USA has broken off.

rich63
Logged

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 798
  • Retired but not forgotten
Re: Tool Steel Striker For The P-10
« Reply #2 on: December 27, 2017, 03:03:05 PM »
Quote from: rich63 on December 27, 2017, 10:11:47 AM
That is great news. I will definitely be purchasing one. The factory firing pin is a very weak at the tip. I had one break off at the 4,000 round mark. Called CZ-USA and they sent me a used one. Put an additional 300 rounds through the gun and the tip of the used one I received from CZ-USA has broken off.

rich63

Wow that's not good. I've got about 200 rounds through the gun with the used one I received from CZ-USA. So far so good but I will jump the CGW as soon as its available. BTW do you do a lot of dry firing? I do but I now use snap caps which I never did until the striker tip broke on my P-10.
Logged
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline rich63

  • Sr. Member
  • ****
  • Posts: 566
Re: Tool Steel Striker For The P-10
« Reply #3 on: December 27, 2017, 04:32:19 PM »
I do dry fire allot, but I use an o-ring and a snap cap.  I'll be watching when CGW offers the new striker.

rich63
Logged

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 798
  • Retired but not forgotten
Re: Tool Steel Striker For The P-10
« Reply #4 on: December 27, 2017, 05:09:45 PM »
Quote from: rich63 on December 27, 2017, 04:32:19 PM
I do dry fire allot, but I use an o-ring and a snap cap.  I'll be watching when CGW offers the new striker.

rich63

As soon as one of us finds out they are available lets give the other a heads up.
« Last Edit: December 28, 2017, 09:54:30 AM by cremaley »
Logged
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline Googe1227

  • Hero Member
  • *****
  • Posts: 3496
  • Chiraq CZ Fan
Re: Tool Steel Striker For The P-10
« Reply #5 on: December 27, 2017, 06:00:39 PM »
Schmeky has a thread going in the CGW forum section that he is continually updating; photo of their new trigger which is expected to be available sometime in January 2018. Keep an eye on it:

http://www.czfirearms.us/index.php?topic=89409.0
Logged

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 798
  • Retired but not forgotten
Re: Tool Steel Striker For The P-10
« Reply #6 on: December 27, 2017, 06:09:05 PM »
Quote from: Googe1227 on December 27, 2017, 06:00:39 PM
Schmeky has a thread going in the CGW forum section that he is continually updating; photo of their new trigger which is expected to be available sometime in January 2018. Keep an eye on it:

http://www.czfirearms.us/index.php?topic=89409.0

Thanks for the heads up. I also contacted CGW and asked them to email me as soon as the new striker is available which they agreed to do.
Logged
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 19821
Re: Tool Steel Striker For The P-10
« Reply #7 on: December 28, 2017, 01:27:21 AM »
I can't wait for the whole shebang upgrade kit.  8)
Logged

Offline Googe1227

  • Hero Member
  • *****
  • Posts: 3496
  • Chiraq CZ Fan
Re: Tool Steel Striker For The P-10
« Reply #8 on: December 28, 2017, 09:51:10 AM »
Quote from: armoredman on December 28, 2017, 01:27:21 AM
I can't wait for the whole shebang upgrade kit.  8)
Ditto
Logged

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 798
  • Retired but not forgotten
Re: Tool Steel Striker For The P-10
« Reply #9 on: January 03, 2018, 01:51:34 PM »
Spoke with Cajun Gun Works this morning. Their new tool steel striker for the P-10 goes into production in the next few days and should be available in approximately 2 weeks. Cost should be around $45. Sign me up!
Logged
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 19821
Re: Tool Steel Striker For The P-10
« Reply #10 on: January 03, 2018, 11:53:07 PM »
Awesome!  8)
Logged

Offline schmeky

  • Hero Member
  • *****
  • Posts: 2897
Re: Tool Steel Striker For The P-10
« Reply #11 on: January 16, 2018, 06:57:40 PM »
Getting really, really close on the new CGW tool steel strikers.  Here is an initial batch, headed for a quick turn around on heat treat. 


Logged

Offline Thebillsman

  • Full Member
  • ***
  • Posts: 233
Re: Tool Steel Striker For The P-10
« Reply #12 on: January 16, 2018, 07:05:26 PM »
SCHWING!
Logged

Offline 2morechains

  • Hero Member
  • *****
  • Posts: 1113
Re: Tool Steel Striker For The P-10
« Reply #13 on: January 16, 2018, 08:06:47 PM »
Nice!
Logged

Offline rich63

  • Sr. Member
  • ****
  • Posts: 566
Re: Tool Steel Striker For The P-10
« Reply #14 on: January 16, 2018, 08:31:59 PM »
Just need one of those. Put my name on one.

rich63
Logged
Pages: [1] 2 3 ... 5   Go Up
« previous next »