Author Topic: p07 spring kit in a p10c  (Read 287 times)

0 Members and 1 Guest are viewing this topic.

Offline Flexible196

  • Newbie
  • *
  • Posts: 1
p07 spring kit in a p10c
« on: January 02, 2018, 12:41:09 AM »
I picked up a used p10c and I took it apart and noticed that the spring and guild rod are the p07 kit from cajun gunworks and in the box was also the factory setup and I was wondering what is the advantage to using a p07 guild rod and spring in the p10c or should I just put the p10c one back in it

Offline texasmojo

  • Jr. Member
  • **
  • Posts: 52
Re: p07 spring kit in a p10c
« Reply #1 on: January 04, 2018, 09:41:36 PM »
I guess you would have to find a way to measure the spring weight differences between the two. My stock rod spring in my 2017 czp07 measures at 15lb when I racked the slide with my fish weight scale.

Offline copemech

  • Hero Member
  • *****
  • Posts: 1534
Re: p07 spring kit in a p10c
« Reply #2 on: January 05, 2018, 12:08:33 AM »
well, the p=07 setup does not come apart to change the spring as ti is "captured", but not sure the 10 is the same.

Offline Wobbly

  • Hero Member
  • *****
  • Posts: 8324
  • Loves the smell of VihtaVuori in the morning !
Re: p07 spring kit in a p10c
« Reply #3 on: January 08, 2018, 04:37:28 PM »
The stock P-10 plastic guide rod does capture the spring, but it's not clear the aftermarket stainless steel rods do the same.
In God we trust; On 'starting load' we rely.

Immature reloaders ask: What's wrong with this gun?
Mature reloaders ask: What did I do wrong ?

Offline bigdave24

  • Sr. Member
  • ****
  • Posts: 333
Re: p07 spring kit in a p10c
« Reply #4 on: January 09, 2018, 05:16:19 PM »
I believe The p10c factory spring is 20 lbs, so it might be a bit stiff for target/competition ammo.  The cgw springs are color coded, so you should be able to see what you have.