Author Topic: Question on the Shadow 2 rear Sight  (Read 629 times)

0 Members and 1 Guest are viewing this topic.

Offline 1SOW

  • Hero Member
  • *****
  • Posts: 14931
  • GO GREEN - Recycle 9MM
Question on the Shadow 2 rear Sight
« on: January 07, 2018, 12:45:49 AM »
In one review it shows the S2 rear sight is height only adjustable.  Which sight come stock...  CZ HAJO or other?
Thanks

Offline andrew1220

  • Full Member
  • ***
  • Posts: 373
Re: Question on the Shadow 2 rear Sight
« Reply #1 on: January 12, 2018, 08:02:52 AM »
In one review it shows the S2 rear sight is height only adjustable.  Which sight come stock...  CZ HAJO or other?
Thanks

Correct, the factory rear sight is elevation adjustable only. I had my local smith fit a fully adjustable rear sight from CZ Custom.
https://czcustom.com/cz-parts-all/front-and-rear-sights/zdl-shadow-adjust-rear-sight-ii.html

Offline 1SOW

  • Hero Member
  • *****
  • Posts: 14931
  • GO GREEN - Recycle 9MM
Re: Question on the Shadow 2 rear Sight
« Reply #2 on: January 12, 2018, 11:14:58 AM »
Thanks Andrew.

Offline Shadow2

  • Full Member
  • ***
  • Posts: 140
Re: Question on the Shadow 2 rear Sight
« Reply #3 on: January 15, 2018, 09:23:33 PM »
You drift your windage which is pretty simple.

Offline 1SOW

  • Hero Member
  • *****
  • Posts: 14931
  • GO GREEN - Recycle 9MM
Re: Question on the Shadow 2 rear Sight
« Reply #4 on: January 16, 2018, 04:24:42 PM »
 :)

I had a HAJO rear on my 75 Shadow and it had several failures of the pivot pin. CZC sent me the new pin and parts that fly out when the pin breaks,  but it broke again. I made one out of drill bit stock and it eventually broke too.
I gave up and reinstalled the comp rear sight.

Offline andrew1220

  • Full Member
  • ***
  • Posts: 373
Re: Question on the Shadow 2 rear Sight
« Reply #5 on: January 19, 2018, 08:30:09 AM »
You drift your windage which is pretty simple.

Not with mine. I had to bring mine to a gunsmith in order to drift it. Even the gunsmith was surprised how tightly the sight was fitted. Prefer being able to adjust the windage in the field.

Offline gustyfox

  • Newbie
  • *
  • Posts: 1
Re: Question on the Shadow 2 rear Sight
« Reply #6 on: January 19, 2018, 11:17:01 AM »
Different Question about the shadow 2 rear sight. I have a CZ-custom shop shadow 2 that I got last year around April. As I was cleaning my gun the other night and I saw one of the two set screws is missing. Is this a part that I can get at a local hardware store? If so, what is the size of this set screw? thank for the help

 

anything